CB Radio Hints and Tips, Installing guidance.

[ghosthunter]

Well the CB Handle thread got me going. After 40 years I am getting back into CB in my truck. I spend a lot of time on the road and in wild places.

So I have on order a Cobra 75 All Road. This is the new offering replacing the old Cobra WX.

The 75 features modern day up grades like,

Bluetooth from Mic to hidden black box.
You can put the black box anywhere in the truck.
The mic powers through usb.
Am / Fm broadcast channels
Built in SWR meter.
The mic can be used up to 100 ft from the truck with portable power source.

I am installing into a 2012 Nissan Frontier Crew Cab.

I need to run a hot wire to the black box and be able to route antenna coaxial to it.
The mic is plug and play. I have multiple usb and cigarette ports in my dash area.

I opted for a 4 ft magnetic antenna for now. The Mount can except any standard antenna.
The mount magnet is the strongest I could find in the shop. 5 inch stainless. The antenna is stainless too.

So I know the basics. Have not determined a location for the black box yet. Possible locations.

Under the hood.
In the canopy up front by the window.
Under the back seat.

Planing on having the antenna center above the rear window.



So any suggestions or advice. About a week out before radio arrives. Plan to put antenna on and route wire and hot lead to my chosen location.

Breaker ,Breaker

[Alchase]

Knowing Frontiers (I have a 2016, SV, quad cab, 4x4) I would be tempted to install the box in one of the under rear seat storage spaces or on the back wall behind the rear seat. There are access holes on the back wall where you can run the wires through for the antenna. And you can run the hot wire under the kick panel, out a firewall access hole to the fusible link connection box on the Positive post of the battery.
On The Nissan Frontier forum, there is an extensive stereo head unit replacement,  that could help running the wires. One guy used the upper glove box for all his after market accessories.
Another option is to pop the glovebox out and install the box behind it?
Lots of options, but I would probably do the under back seat option myself, mostly because I am old and don’t contort anymore to all the weird positions it would take to do an under dash install.
 

The Frontier forum is here:
https://www.clubfrontier.org/


PS: I forgot the under driver seat option. The here is space there as well, I have my handgun safe under mine.

[ghosthunter]

Yeah thanks for the tips on the access ports behind the seat. Had not had a chance to look.
One o y under seat storage is full to the max with ammo. So I might explore the other side.

Thanks for the ideas.

[Rat44]

That looks like a good option for a small cab truck.
Cobra makes some good radios.
That FM mode will be nice to have .
Reminds me I need to get a CB installed in my Jeep.
Already have a 2meter Ham I use but still split on whether to go with a CB or GMRS.
 Or both .
 

[Boss .300 winmag]

🤔

[ghosthunter]

That looks like a good option for a small cab truck.
Cobra makes some good radios.
That FM mode will be nice to have .
Reminds me I need to get a CB installed in my Jeep.
Already have a 2meter Ham I use but still split on whether to go with a CB or GMRS.

I all ready FRS installed In My truck to talk to my hunting group rhinos. The 75 was marketed towards Jeep owners.

[Rob]

I was inspired by that thread as well.  I am probably going to go with the Cobra 75 as well.  I like the concept.

I posted it there, but this site has a ton of articles on setup and other technical considerations.
http://www.firestik.com/Tech_Docs.htm

If it were me, I would not mount the black box in the engine compartment.  I would worry about heat.  I am thinking somewhere in the cab for me.  Mounting in the bed is an interesting idea though. Other than routing power that would be a pretty simple solution.

I have ordered the hood mount, the antenna and the cable.  Just need to commit to the CB.

Do you have faith in the Cobra SWR meter?  I was considering buying a dedicated unit for that.

[Rob]

Another set of resources
https://www.rightchannelradios.com/blogs/learning-center

[Rob]

I found this entertaining (on the firestik page)

LISTEN UP!
Compliments of Firestik® Antenna Company Technical Support Team

Copyright © 1996 Firestik® Antenna Company
If there was ever a time to read BEFORE taking action, than it is BEFORE doing a CB installation. The "modern" world of "plug-n-play" and/or "point-and-click" has literally sucked the common sense out of society. Come back to the real world please. Installing a CB isn't the same as putting together a swing set. You do something wrong and you might just burn out your radio in a matter of seconds. GO FORWARD WITH KNOWLEDGE!

Mobile CB never has been, nor can we ever foresee it as being plug-n-play equipment. I don't care what you have ever been told, you cannot just put a CB system on a vehicle and expect it to be ready to go. It doesn't matter if you put the exact same radio and antenna set up on the exact same type of vehicle I if you don't put an SWR meter on your set up, you are flirting with an expensive lesson. Remember this!

THERE IS NO SUCH THING AS A UNIVERSALLY PRE-TUNED CB ANTENNA . PERIOD!

If you read on a package that the antenna was pre-tuned … that only means that it was checked on a manufacturers test bench to verify that it was within the frequency tolerances set by the manufacturer. Ground plane dependent antennas MUST have counterpoise (ground plane) and unless you are driving a car that is shaped like, and has the exact same metal mass as the manufactures test bench,YOUR ANTENNA NEEDS TO BE SWR CHECKED AFTER INSTALLATION. And finally, if the packaging of one antenna hanging on the wall says that it has a tunable tip, that DOES NOT mean that the one next to it that doesn't have a tunable tip doesn't need to be tuned. The one with a tunable tip is just easier to tune.

This is a sensitive matter and you MUST get it right. How sensitive is this SWR thingy? So much so that if you move your antenna from one location to another location on the same vehicle, there is a very high likelihood that the SWR is going to change. Do not second-guess this process.

The reason you adjust the antenna is because you don't have a way to adjust the rest of the things that the SWR meter is seeing. I suppose you could take a sledge hammer and beat the vehicle up so much that the SWR would change but that is not something I would recommend or even try. The antenna is adjusted to compensate for all of the flaws that feed it and surround it. You wouldn't believe all of the silly things we have seen over the years. We get to hear all of that stuff because the antenna always gets the blame for bad SWR.

And something else, SWR meters are every bit as dumb as rocks. Too many people give them way too much credit. That is, some people actually think that an SWR meter can ignore everything except the antenna. Wrong! When your SWR meter is being used it is "seeing" everything in the area. This includes connectors, coaxial cables, antenna mounts, antenna stud mounts, the vehicle itself, and of course the antenna. And if your mother-in-law is standing close to the antenna, or your door is open, the SWR meter WILL see that and take it into consideration. There are two great forces in the universe. One is gravity and the other is magnetism. CB antennas can radiate a magnetic field that can be absorbed and deciphered by another receiver that is thousands of miles away. So if your goat is sleeping on the roof of your car, or if your neighbors are throwing a block party in the bed of your pick-up, you're gonna have to throw 'em out until you have get your SWR adjusted.

Common sense rules! If we had the choice of packaging a cubic foot of common sense or a cubic yard of intelligence with our products, we would chose the common sense. Don't let its size fool you, common sense has more mass than intelligence!

[Naches Sportsman]

My CB is directly wired to the battery and I have it mounted on the passenger side of my center console. I chose to put it directly there instead of using the cigarette plug. On my truck, my antenna is about a foot from the windshield on the drivers side.

Sounds like you’re going with a magnetic antenna, but if you were to go with a permanent antenna, I’d mount it to the hood. Folks still put antenna’s on the top of their cabs, but I’ve run into the problem too much of water leaking into the cab on work trucks doing that and got tired of fixing the problem every winter.

I’ve not encountered many truckers on interstates using CB’s whatsoever even in crappy conditions. Use mine daily talking to lowboy drivers, log truck drivers, other foresters, and loggers mainly.