Free: Contests & Raffles.
the way you get around the leaking seals when you run sythetic is to run a thicker oil.... say from a 5W-30 change to a 20W-50... that'll usually curb it for a while... (i'm not talking about a worn engine that has blow by.... but an engine that has leaking valve seal for instance...)
Whoo, Whoo there TEX, i understood your post, you said heh if your running 5w30 just change over to 20w50, and that is bad advice for a late model vehicle, you did not qualify your statment by saying if it is an older engine, say 80's or older.As far as the Nova, it use's 10w30 castrol, i know because i service the vehicle.And no i do not work for a dealer.I have been doing and have been in the repair business for over 27yrs so its not a hobby for me and i'm not saying i know everthing but i do have alot of experience to draw from.My grandfather had a saying "Grease is cheaper than parts", change your oil often, use a good quality oil and make sure the level is full between changes and you should never have an oil related failure.The #1 reason for failures that i have been seeing lately is lack of oil in engines, lack of service at regular intervals and routine level checks.Extended service intervals of 7500+ miles is great but you still need to check the level and people do not do this, an engine will consume oil during normal use and when the manufacture says they dont need to service as often then checking it gets over looked, which leads to low levels, oil starvation and engine failure. Almost every single engine failure i see, the first thing i pull is the oil level indicator (dipstick) and it is usually dry..