Rifle reloading?

[goody31]

Hi,

I would like to get started reloading my rifle rounds.  I haven't the slighest clue on what model of relaoder to get or what i need.  What is your favorite brand that you use?  I shoot a REM CDL 30.06 these loads will be for Mulies and Elk which I hunt in Oregon.  Thanks for the advice and help.

Goody

[elk311]

It's a bit advanced for starting but it has valuable info and can give you an idea of where you want to go.  http://www.precisionreloading.com/mm5/merchant.mvc?Screen=PROD&Store_Code=PRE&Product_Code=SI00999&Category_Code=DVD_RELOAD

What brand is like asking which pickup truck do you like. You'll get endless opinions... See "where" you want to go and how much you're willing to spend FIRST.  For example why by a progressive reloader that will pump out 500 rounds per day if you only need to shoot 5-20 rounds per year? Progressive reloader $500, single stage reloader $100 (or less). The opposite may also be true for you, it just depends.

[carpsniperg2]

i am a redding and rcbs fan big time. rcbs has a nice starter kit that midway usa and cableas and a few other outdoor stores sells its not to much and is a great setup

[Jamieb]

If I was just starting out. I'd buy a RCBS kit, add a calliper and a case trimmer and your pretty well set.

[dontgetcrabs]

 

[NRA4LIFE]

Another for RCBS.  I've had a Rockchucker for 20 years now.  Couldn't even tell you how many rounds it's reloaded.  I also originally bought the kit.

[Gutpile]

If I was just starting out. I'd buy a RCBS kit, add a calliper and a case trimmer and your pretty well set.

I agree, or you can watch the want adds or craigs list. I got mine from the want adds. It came with dies, manuals, brass, bullets, tumbler, trimmer, etc etc etc etc for $200.00. There are good deals to be had if your patient but that starter kit isn't bad either.

[ing]

RCBS Rockchucker.  Hornady makes good reloading stuff  also.

[alanger]

RCBS is the best stuff to get. 

[Rgrady35]

I use Lee. I've never had any issues with them. I load .38 special .45 acp .45 Colt 7mm Mag 6mm .243 and until I gave my brother in TX my .22-250, I reloaded them too. I think it's a good press, but I've never used any others.

[JackOfAllTrades]

For bottle neck cartridges, A strong single stage reloading press is best for anyone starting out or veterans of reloading. I started with a Lyman, but Hornady makes a couple good ones too. I've had an RCBS RockChucker for years. A JR before that.  My RockChucker sits opposite to my Dillon, and next to my Star Lubrisizer. Right there with my Uniflo and RCBS 10-10 and the Lyman Case trimmer. Tools on the bench include a dial caliper and RCBS concentricity guage, primer pocked reamer/cleaners, funnel, lube pad, debur tool, load blocks, reloading books and manuals, bullet pullers, and a whole slew of dies.

Reloading is a great hobbie, and once you have all the tools, you will save money on your ammunition, not to mention the custom rounds you get to make for your chosen rifle.

WARNING!  It can be a very addictive hobbie.

-Steve

[KillBilly]

I prefer the Lyman turret press for most of my work. I also have a Lee press that I use for de-capping and neck sizing. I use a variety of dies, Lee, RCBS, & Redding.
I would suggest reading some articles on reloading first. Most reloading manuals have great info in them, usually in the very front of the book. I would argue that there is a cheap way to get started... It takes a lot of equipment to load consistent quality hand loads. If you are not looking for high quality loads then you can get by with a starter kit but in my opinion it defeats the purpose.

My  

[thinkingman]

Lee Anniversary kit will get you started for less $ and will turn out excellent ammo, as long as you do your part.
Get a couple of manuals and read, read, read.
Then read some more.
Don't let anyone tell you Lee is junk...it's not.

[runningboard]

I agree with most of what has already been posted, but another angle is that you might not save money but will shoot more. I know that's true for me, one day my nephews tracked me down at the range and asked how many shots I took that day, I replied "67 & still going. I have more rifles that I haven't touched yet." one of them said "I don't shoot that much in a year."
a lot depends on what your goals/reasons for getting into reloading are. I like being able to have premium bullets in my rounds without spending $50-$70 per box of 20.

[Skyvalhunter]

And buying a new barrel