collapse

Advertisement


Author Topic: How did you learn taxidermy  (Read 8614 times)

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: How did you learn taxidermy
« Reply #15 on: February 19, 2010, 03:54:50 PM »
I went to school in Montana and it was worth every Penny.
where did you go ?

There is a school in Montana called "Second Nature School of Taxidermy".  I have heard nothing but good things from that school.  

Offline boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50475
  • Location: Selah, Washington
Re: How did you learn taxidermy
« Reply #16 on: February 19, 2010, 04:42:26 PM »
Honestly they don't even bother me much after what I see at work.  Burn victims are the best.  They really work on your senses the most, especially the nose/taste,  then emotionially.  If you can handle what ocmes out of people from all their exits, then not much in the animal kingdom can shake you up.

Offline Whitelightning

  • Washington For Wildlife
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Sep 2009
  • Posts: 501
  • Location: Lake Stevens
  • Hey Yogi
Re: How did you learn taxidermy
« Reply #17 on: February 21, 2010, 07:19:53 AM »

it also takes an iron gut. I heard a resent story of a taxi skinning a skunk.  ;)
 Noway I would even think about that!!

Kris

It wasn't that bad!  :rolleyes: 

I get quite a few people say "Ewww that's gross how do you do that?".  Usually I tell them if I can get if off with bleach it's not gross.  I have done far worse things than skinning out a skunk.   :chuckle:  I have a cougar in the shop right now that smells absolutely retched.  :yike: 

 :) My husband was nice enough to bring me lunch a few weeks ago while I was working in the shop fleshing a Bear that had rolled around in a wallow.



I have another picture of me at BLKBEARKLR's shop while we were eating lunch on the same table we had just got done fleshing 3 elk capes on.  I am still looking for it.  Littereally had to push the scrap meat over for us to put our plates down.   :chuckle:

Michelle is that my bear you are fleshing? sorry I didnt leave you any meat on that one :chuckle:
Smoke em when ya see em!

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: How did you learn taxidermy
« Reply #18 on: February 21, 2010, 08:54:10 AM »

Michelle is that my bear you are fleshing? sorry I didnt leave you any meat on that one :chuckle:

Actually, yes it was come to think about it.  :) 

That thing must have been taking a mud bath when you killed it.  It was so muddy it had dredlocks (sp?).  :chuckle:

Offline bolsen

  • logger
  • Washington For Wildlife
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Apr 2009
  • Posts: 285
  • Location: Sw wa
Re: How did you learn taxidermy
« Reply #19 on: February 21, 2010, 05:09:42 PM »
i went to second nature school of taxidermy last spring and it was great. really good teachers. i recommend anyone thats interested in going to school to give them a call. Im doing pretty good in my first year.

Offline boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50475
  • Location: Selah, Washington
Re: How did you learn taxidermy
« Reply #20 on: February 21, 2010, 05:14:36 PM »
Cost?   you can pm me.

Offline Elkstuffer

  • ALL THAT'S WILD TAXIDERMY
  • Business Sponsor
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jul 2007
  • Posts: 1492
  • Location: Tieton, WA
    • Facebook.com/allthatswildtaxidermy
    • All That's Wild Taxidermy
  • Groups: WWSF, NWTF, RMEF, DU, SCI, MDF
Re: How did you learn taxidermy
« Reply #21 on: February 21, 2010, 10:17:38 PM »
I started dabbling with taxidermy when I was 9 years old. I sent away for a taxidermy (mailorder coarse) and kind of learned the basics. I decided that I wanted a career change after going to work for Ford Motor Co. right after college. I also knew that if I was going to charge people for there hard earned trophies that I better know what I'm doing. I enrolled into the Missoula Valley School of Taxidermy in Thompson Falls, MT. Great instructor and great learning experience. I wound up spending between $8,000 and $10,000 by the time I was finished. And like Michelle said "I will continue to learn as long as I'm still doing it".
Serving Central Washington and the Northwest for all of your taxidermy needs since 1999.

ALL THAT'S WILD TAXIDERMY
960 Dilley Road
Tieton, WA 98947
(509)673-1579

"If you are not working to protect hunting, then you are working to destroy it."     Fred Bear

Offline bowhunterforever

  • Non-Hunting Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 8540
  • Location: Lincoln, Co
Re: How did you learn taxidermy
« Reply #22 on: February 21, 2010, 10:28:15 PM »
have any of you guys gone to a taxidermy school? I know they cant teach you everything but I visited one this last week in montana and im thinking about attending i was just wondering if any taxidermists on here started out that way...
What school did you visit bowtech?
You sure you know how to skin griz pilgram

Offline bucklucky

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 9541
  • Location: Skookumchuck Wa.
    • Charlie Smith
Re: How did you learn taxidermy
« Reply #23 on: February 21, 2010, 10:32:29 PM »
I guess I better add mine now  ;)

I actually wanted to be a Taxidermist since I was in 2nd grade. Every since then all I did was draw deer , elk , moose , and caribou. That was clear through the 12th grade. I even had a teacher stop class in the middle of a lecture to show everyone a picture I was drawing while everybody else was taking notes  :chuckle: He said to me and the class " dont stop, keep on drawing this will get you somewhere someday" and he continued his lecture and I continued to draw.
 
  After Highschool I started killing some nice bucks and hung out at the local Taxidermy shop with my budy. I basically learned some basics and learned how to cape. From there I took everything I learned thereand re-learned everything the way I thought it should be done. No more shortcuts. I would say my best learning tool was Scott Brewers video's in Research. They helped me out quite a bit. I never did go to school and by the time I was seriousely was thinking about it I pretty much learned what I needed anyway so I kept my money and started my buisness. I have learned thingsa nere and there. Got some good help from a couple of seminars I took while at the Boise Taxidermy competition in 07 or 08. I have gotten a few good pointers from some very good taxidermists also. Like as stated by a few others I will never quit learning. I swear I learn something new every time I do something. I learned today that Watusis ar fricken HUDGE  :chuckle:

Offline Kuduman

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jul 2009
  • Posts: 434
  • Location: Dayton, Washington
Re: How did you learn taxidermy
« Reply #24 on: February 22, 2010, 11:11:16 AM »
 :yeah:

Bucklucky is right on the money. I've been out for a bit and noticed this thread when I got back on line.
 I like most everyone else am self taught. I really started learning when I cometed and state and regional shows. I think that's one of the reasons that I would like to see a state association start up again. Seminars at some of these shows are a great value if there put on by some of the real masters of our profession.  I've attended Scott Brewers seminars and felt lucky that I did he's awesome at what he does and that reflects in the cost of his work.
Like allot of things taxidermy is an evolving artform and just when you think you got it you realize you don't. New methods and new products come out every year that cause you to stay on top of your profession.

Jeff

A.K.A Kuduman

Offline Ballance1

  • Business Sponsor
  • Trade Count: (0)
  • Scout
  • *****
  • Join Date: Oct 2008
  • Posts: 442
  • Location: E. Washington
    • The Shed Taxidermy Studio
Re: How did you learn taxidermy
« Reply #25 on: February 22, 2010, 02:43:10 PM »
Missoula Valley school of Taxidermy in Thompson Falls.  It was fun and I learned a lot

Offline bowtech721

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Feb 2009
  • Posts: 856
  • Location: Oakville WA
Re: How did you learn taxidermy
« Reply #26 on: March 01, 2010, 01:51:36 PM »
I visited second nature and if the money works out im gonna go i really liked the guy and it seemed like a good place to start

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9120
  • Location: In the "Blind"! Go Cougs!
Re: How did you learn taxidermy
« Reply #27 on: March 02, 2010, 09:32:32 PM »
Maggots are part of the business don't ya know.  :chuckle: 







How did the Rice Crispies get into the tub?   :chuckle:
Cut em!
It's not the shells!  It's the shooter!

Offline Pathfinder101

  • The Chosen YAR
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jan 2009
  • Posts: 11929
  • Location: Southeast WA
  • Semper Primus
Re: How did you learn taxidermy
« Reply #28 on: March 02, 2010, 09:38:51 PM »
 :chuckle: :chuckle:  been there.. :puke:
Before you criticize someone, you should walk a mile in their shoes.  That way, when you criticize them, you're a mile away and you have their shoes.

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: How did you learn taxidermy
« Reply #29 on: March 03, 2010, 10:16:56 AM »

How did the Rice Crispies get into the tub?   :chuckle:

I have a ziplock of them for snacken and I dropped some.  :yike:

 


* Advertisement

* Recent Topics

Sauk Unit Youth Elk Tips by Kales15
[Today at 02:10:11 PM]


1993 Merc issues getting up on plane by Threewolves
[Today at 01:11:29 PM]


3 pintails by metlhead
[Today at 12:35:03 PM]


Unit 364 Archery Tag by buglebuster
[Today at 12:16:59 PM]


In the background by zwickeyman
[Today at 12:10:13 PM]


A. Cole Lockback in AEB-L and Micarta by A. Cole
[Today at 09:15:34 AM]


Willapa Hills 1 Bear by hunter399
[Today at 08:24:48 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by Threewolves
[Today at 06:35:57 AM]


Sockeye Numbers by Southpole
[Yesterday at 09:02:04 PM]


Selkirk bull moose. by moose40
[Yesterday at 05:42:19 PM]


North Peninsula Salmon Fishing by Buckhunter24
[Yesterday at 12:43:12 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal