collapse

Advertisement


Author Topic: Third Axis Leveling  (Read 2143 times)

Offline PacificNWhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Sep 2007
  • Posts: 3599
  • Location: Bonney Lake
Third Axis Leveling
« on: April 12, 2010, 02:26:04 PM »
I was doing some reading on shooting today and ran across an arctical that talked about third axis levelig and the importance of it in relation to steep angled shots. Of course the article recommended a product from http://hamskeaarchery.com/. Is there any other way to tell without buying something like this? I plan on swinging by my bow shop later this week but Andy is usually really busy so I thought I would start here.

Thanks, JB

Offline BULLBLASTER

  • Non-Hunting Topics
  • Trade Count: (+15)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 8099
Re: Third Axis Leveling
« Reply #1 on: April 12, 2010, 02:35:56 PM »
i have set mine by just shooting steep up and down hill shots and playing with the adjustment. just watch the bubble closely on the shots. if the down hill go left, the uphill should go right. if this is the case the third axis needs to be adjusted to swing the sight toward the bow. if it is opposite swing away from the bow. a quick visual check is that at rest the sight should be swung slightly toward the bow because of the torque caused by the cable rod/rollers at full draw.

hard to explain, but once you figure it out it will make a difference. more so with a target scope than a pin sight.

Offline Matt

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Dec 2007
  • Posts: 360
  • Location: Oak Harbor
Re: Third Axis Leveling
« Reply #2 on: April 12, 2010, 03:51:10 PM »
3rd axis is very important.  But not all sights have this adjustment.  Most of the top of the line ones do but not all.  I have the device that you linked and it works for you at full draw and your influence on the the bow with torque.  Most shops have a bench checker and it only takes a couple of minutes to do it.
USN Ret. Chief
Bow Only

Offline konrad

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 253
  • Location: South Lake Whatcom, Puget Sound
Re: Third Axis Leveling
« Reply #3 on: April 15, 2010, 09:32:46 PM »
Hang a plumb bob (weight with string) from a branch on a tree.
Kneel down and draw the bow.
Align the edges of your pins with the string and look at your level.
If the bubble is not centered, adjustments must be made.

This assumes your sight has a third axis adjustment (like the Spot Hoggs).

It DOES make a difference.
“The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter can not be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles.”

Col. Jeff Cooper

Offline dreamingbig

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2007
  • Posts: 2776
  • Location: Mukilteo, WA
Re: Third Axis Leveling
« Reply #4 on: April 16, 2010, 07:19:16 AM »
It makes a difference and you won't find a better device than the one Hamske makes but there are home versions that others have mentioned.  Third axis isn't as important on flat land but it will effect your POI on uphill and downhill shots.
@mukbowhunt
Avid Bowhunter
Maxxis 35 / Trykon XL

Offline PacificNWhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Sep 2007
  • Posts: 3599
  • Location: Bonney Lake
Re: Third Axis Leveling
« Reply #5 on: April 16, 2010, 07:37:30 AM »
Thanks for the help guys, I don't hunt flat ground so I need to get this figured out.

Offline konrad

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 253
  • Location: South Lake Whatcom, Puget Sound
Re: Third Axis Leveling
« Reply #6 on: April 16, 2010, 07:51:18 AM »
http://www.spot-hogg.com/products/bow_sights/index.php

I have found, through bitter experience, there is no such thing as a "good, cheap sight".
In my opinion, you can't go wrong with Spot Hogg.
“The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter can not be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles.”

Col. Jeff Cooper

Offline TheHunt

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Sep 2007
  • Posts: 6238
  • Location: Western Washington
Re: Third Axis Leveling
« Reply #7 on: April 16, 2010, 08:15:11 AM »
I would second the Spot Hogg.  Personally like the wrapped seven deadly pins.
275 down 2

Offline konrad

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 253
  • Location: South Lake Whatcom, Puget Sound
Re: Third Axis Leveling
« Reply #8 on: April 16, 2010, 05:07:08 PM »
This is my rig.
I wound up with the Hogg It, seven, .010 pins, wrapped, with the 3 position light and then added the 8 inch extension bar.

I also use the Spot Hogg Whammy rest and B-Stinger.
“The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter can not be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles.”

Col. Jeff Cooper

 


* Advertisement

* Recent Topics

New record WA shiras by huntnnw
[Yesterday at 09:43:18 PM]


maybe a shooter by lewy
[Yesterday at 09:37:17 PM]


Winthrop wolves by mountainman
[Yesterday at 09:18:19 PM]


Back country tent suggestions by millerwheeler
[Yesterday at 08:29:16 PM]


From Behind by Kingofthemountain83
[Yesterday at 08:23:08 PM]


Wildlife Obsession Duvall WA Taxidermy Closing its doors by Irish_hunter93
[Yesterday at 07:45:19 PM]


Drew Moose Tag by redi
[Yesterday at 06:57:46 PM]


Western Wa gunsmith by okie john
[Yesterday at 06:02:52 PM]


New bow ideas by blackveltbowhunter
[Yesterday at 04:49:53 PM]


management buck by jstone
[Yesterday at 04:25:35 PM]


PRIME CENTERGY by highside74
[Yesterday at 01:18:39 PM]


Build a 7mm Weatherby mag by Kingofthemountain83
[Yesterday at 12:12:59 PM]


Blueprint for next year by Ghost Hunter
[Yesterday at 11:01:38 AM]


Idaho's new Deer/Elk License System by JakeLand
[Yesterday at 09:35:56 AM]


Idaho Billy by redi
[Yesterday at 08:50:50 AM]


Florida Bear Hunt by kodiak06
[Yesterday at 08:02:25 AM]


Handgun for grouse by hunter399
[Yesterday at 03:16:47 AM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal