collapse

Advertisement


Author Topic: MPI versus McMillian?  (Read 2398 times)

Offline Hyde

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jun 2010
  • Posts: 731
  • Location: Renton
MPI versus McMillian?
« on: December 26, 2010, 09:05:07 PM »
Does anyone have experience owning or shooting both MPI and McM stocks? 
Nothing witty here.... move along.

Offline rbros

  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Mar 2010
  • Posts: 433
  • Location: Olympia, Wa
Re: MPI versus McMillian?
« Reply #1 on: December 27, 2010, 03:59:42 PM »
McMillan yes....run from the MPI!

I have seen way to many MPI's break and crack.  With McMillans, Manners, HS, you just won't have any issues and the fit will be perfect.
R Bros Rifles
www.rbrosrifles.com

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: MPI versus McMillian?
« Reply #2 on: December 27, 2010, 07:12:05 PM »
sand on a mpi and you will find creative use of popsicle sticks. sand on a mc millan and you will find a fiberglass layer over one of a few different fills. they are expensive, but they sell for what you paid for them later in life. buy an mpi and finish it, paint it, bed it....then see if it still a bargain.

Offline Jamieb

  • Past Sponsor
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2008
  • Posts: 1862
  • Location: Lacey,WA
Re: MPI versus McMillian?
« Reply #3 on: December 27, 2010, 10:57:27 PM »
Well that's a first for me.
I've never seen anybody ask for opinions on McMillan and MPI in the same post before.
They cant even really be compared.
McMillan is light years ahead of MPI.

Offline Hyde

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jun 2010
  • Posts: 731
  • Location: Renton
Re: MPI versus McMillian?
« Reply #4 on: December 28, 2010, 08:23:26 AM »
It's funny to read varying opinions on different things.  I have read on other forums all the reasons why McMillian sucks, why MPI sucks, why everything sucks.  There's a pretty lengthy thread in our archives here that go on and on about different synthetic stocks.  I just wondered if anyone had both and could compare.  From my own research, McM customer service is lacking, but the general consensus is their product is top notch.  I have a 375 HH to re-stock, and don't want the thing coming apart in in the middle of a "dangerous game" encounter.  Boyd's quit selling my favorite laminated stock in left hand or I'd just go with that. 

I do appreciate the opinions though.

Nothing witty here.... move along.

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: MPI versus McMillian?
« Reply #5 on: December 28, 2010, 08:33:33 AM »
hyde, mpi's do not suck, they are good stocks....but, they will need finishing and by the time that is done you will be right near the price of a mc m. the beauty of a mc stock is they are always a good finish.....sans a few micro chips. there are a billion collor choices in mc swirlys and they never rub off. I have a mag fill on my 375H&H and would recomomend standard fill of you go the mc m route, unless you are trying to fatten the thing up. the only guns I have ever seen bust bedding were my 6.5lb 300rum and a very light 338 lapua. it would take a sub 7lb 375 before I would begin to worry about bedding issues. both are good stocks. a used mpi can fetch 250 bux, a used mc m, depending on model can bring 350-500, so resale might want to be considered.

HS stocks are pretty tough to beat for the $$. they are not as friendly to my hands and a bit heavy, but well constructed. if you like their offereings it is a good value. just do yourself a favor and never handle any mc millans as you will be stuck on them like me.

Offline Hyde

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jun 2010
  • Posts: 731
  • Location: Renton
Re: MPI versus McMillian?
« Reply #6 on: December 28, 2010, 05:30:40 PM »
HS stocks are pretty tough to beat for the $$.

I may look at an HS stock for a Rem 700 project, but they don't offer anything for my A-Bolt 375.  I have an A2 McM on order for my left hand 22-250, and will just wait and see how I like it.  I am not trying to make a light rig, especially in 375.  I don't mind toting a heavier rifle at all, the most important thing for me is how it balances.  McMillan is telling me 3-4 months on my current order.  MPI quoted 6 weeks for a fully finished stock for the 375.
Nothing witty here.... move along.

 


* Advertisement

* Recent Topics

49 Degrees North Early Bull Moose by B4noon
[Today at 10:42:06 AM]


Good Fishing Guides in Puget Sound by blackpowderhunter
[Today at 10:40:51 AM]


Challis/salmon idaho packstrings? by 2MANY
[Today at 10:05:30 AM]


Spot lock in the salt? by CP
[Today at 09:37:05 AM]


AUCTION: Custom knife by Alden Cole by teanawayslayer
[Today at 09:29:24 AM]


More Kings! by blackpowderhunter
[Today at 08:50:08 AM]


Good day of steelhead fishing! by snit
[Today at 08:10:42 AM]


Bonaparte Lake by AntlerHound
[Today at 07:48:39 AM]


Honda BF15A Outboard Problems - FIXED! by pickardjw
[Today at 07:39:38 AM]


KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Today at 06:27:05 AM]


New to bear hunting by JimmyHoffa
[Yesterday at 10:39:22 PM]


Seeking packer OnCall for early archery unit 328 Naneum/Colockum by DeerSkin
[Yesterday at 10:01:25 PM]


Best all around muzzy (updated) by riverrun
[Yesterday at 09:17:25 PM]


GPW Trail Closures by Kascade_Killer
[Yesterday at 08:34:19 PM]


2025 Crab! by Stein
[Yesterday at 03:05:47 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal