collapse

Advertisement


Author Topic: winchester x-150  (Read 3975 times)

Offline fishnranger

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Aug 2010
  • Posts: 50
  • Location: kennewick,washington
winchester x-150
« on: August 30, 2011, 04:44:58 PM »
got this gun from my dad went out and shot today it shot a 3 inch group at fifty yards with 100gr pyrodex pellets and 295 grain powerbelt bullet does this sound about right first time ever sighting in a muzzy had a little help from my daughter too

Offline TopOfTheFoodChain

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Jan 2009
  • Posts: 498
  • Location: Kelso
Re: winchester x-150
« Reply #1 on: August 30, 2011, 05:45:18 PM »
OK for first time. Be sure to try different powder loads to get the best accuracy. It will get better. I have the same gun, was shooting water filled milk jugs at 200 yards on Sunday.

Offline fishnranger

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Aug 2010
  • Posts: 50
  • Location: kennewick,washington
Re: winchester x-150
« Reply #2 on: August 30, 2011, 10:09:43 PM »
i did forget to mention it was shot off of a tailgate i did not have a table set up or anything so i was pretty happy with it do you shoot pellets or loose powder how many grains and what bullets do you shoot

Offline BLUEBULLS

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2007
  • Posts: 1508
  • Location: Pasco
Re: winchester x-150
« Reply #3 on: August 31, 2011, 05:38:51 AM »
I've been playing with mine a little lately. I haven't noticed much change in accuracy with different powder loads. I've used any where from 100grains to 150grains and bullets from 240grains to upper 300's. slap a scope on it to work up a good accurate load andthen take it off and get it where you want with open sights. A lot of people will bad mouth the X-150 but I've shot 5 or 6 of them and killed game with 3 different guns, they shoot well for me.

Offline TopOfTheFoodChain

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Jan 2009
  • Posts: 498
  • Location: Kelso
Re: winchester x-150
« Reply #4 on: August 31, 2011, 07:46:25 AM »
i did forget to mention it was shot off of a tailgate i did not have a table set up or anything so i was pretty happy with it do you shoot pellets or loose powder how many grains and what bullets do you shoot
I'm usually at about 110gr Triple 7 3f. Was shooting .50cal 295gr lead powerbelts, or .357cal 175gr Dead Centers- obviously different elevation adjustment on the peep.

Offline jstone

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jul 2009
  • Posts: 6566
Re: winchester x-150
« Reply #5 on: August 31, 2011, 09:56:47 AM »
Thats the gun i am trying to get a good load for my son. I got down to 90 gns. But shot the sst bullets. Think i need a different bullet. 295 powerbelts work ok? The sst was tight.

Offline TopOfTheFoodChain

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Jan 2009
  • Posts: 498
  • Location: Kelso
Re: winchester x-150
« Reply #6 on: September 01, 2011, 11:30:25 AM »
Thats the gun i am trying to get a good load for my son. I got down to 90 gns. But shot the sst bullets. Think i need a different bullet. 295 powerbelts work ok? The sst was tight.
295 LEAD Powerbelts work for me. Killed a lot of deer and a few elk. All but one deer dropped in it's tracks- one made it 15 feet. One elk made it 40 yards.

Offline jstone

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jul 2009
  • Posts: 6566
Re: winchester x-150
« Reply #7 on: September 01, 2011, 06:31:09 PM »
Thanks i will try them. :tup:

 


* Advertisement

* Recent Topics

Need information on having a gunsmith thread a barrel for thin walled chokes. by Dukalr
[Today at 07:35:33 AM]


Quinault Bear guide/help by teanawayslayer
[Today at 07:21:55 AM]


Also looking for help deciding on a scope by Magnum_Willys
[Today at 07:12:26 AM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by westside bull
[Today at 07:02:10 AM]


Gots me a new/old rockchuck rifle coming by JDHasty
[Yesterday at 10:41:07 PM]


Litefighter tent ? by slowwalker
[Yesterday at 10:25:44 PM]


HUNTNNW 2025 trail cam thread and photos by kodiak06
[Yesterday at 10:22:12 PM]


Looking for Solid 22 LR input by JDHasty
[Yesterday at 10:21:31 PM]


49 Degrees North Early Bull Moose by westdcw
[Yesterday at 09:57:25 PM]


Teanaway bull elk by teanawayslayer
[Yesterday at 05:57:24 PM]


6mm Creedmoor Gauges by pickardjw
[Yesterday at 01:27:28 PM]


Brittany breeders by ghosthunter
[Yesterday at 01:17:23 PM]


Kings by metlhead
[Yesterday at 12:37:26 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by rainshadow1
[Yesterday at 11:46:04 AM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Karl Blanchard
[Yesterday at 10:47:28 AM]


Velvet by MADMAX
[July 11, 2025, 07:35:16 PM]


Advice for a first time Bear spot and stalk? by Crunchy
[July 11, 2025, 06:02:28 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal