collapse

Advertisement


Author Topic: First ML Bull(5x6) killed Oct.1 RimRock  (Read 15190 times)

Offline coyotewallace

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Mar 2010
  • Posts: 278
Re: First ML Bull(5x6) killed Oct.1 RimRock
« Reply #15 on: October 03, 2011, 11:55:31 AM »
My hunting trip actually started with the luck of the draw; there was only 18 permits available for the muzzleloader hunt in GMU364 in the the Rimrock area of the eastern Cascade Mtns. I feel fortunate to have been drawn for this hunt.

We left Friday morning to set up camp in an area that we had previously scouted; arrived at around 8:00 am. After setting up camp, we again did some preliminary scouting to see if anything had changes from our previous scouting trips. I was with my hunting partners Gary and James. Our scouting took us out to 5-miles from camp on various roads before returning to camp for supper and conversation. We did spot a nice 6 x 6 and his cows that evening. It was encouraging that there was elk in the area. Maybe we were going to get lucky.

Up later than I wanted at 5:00 am the next morning, we ate a hurried breakfast. Gary and James went off in a different direction than we had gone the night before, but I went back to the same area where we had spotted the bull the day before. I set up in an area of trees adjacent to a clearing that gave me an open shot out to more than 150 yards. After a short period of time I saw two cows moving slowly through the trees and into the clearing. They continued on into the trees on the opposite side of the clearing only to be replaced by a beautiful bull elk standing proudly in the clearing. He gave me a quarter-away shot, slightly downhill, at what turned out to be about 70-yards away. I took the shot, watched him stiffen and raise his head, then bolt into the trees where the cows had gone. I saw him drop, and could hear him in distress 25yrds from where he was shot. By the time I got to him he was dead. The 250g T/C SW bullet had entered his left side, took out lungs and liver and lodged in the hide on the right side just behind the shoulder. There was no exit wound. I checked the time. It was only 7:15 am. I had only been out less than an hour and had filled my tag.

I called my partners immediately to tell them that the hunt was over and to come give me a hand getting the bull up to the road. I dragged the animal up the hill as far as I could with the quad. By then, Gary and James were there with the pickup truck and together with the winch on the quad and the truck we pulled him the rest of the way up to the road and loaded him into the truck. Back at our camp we skinned and prepped the bull and got him hung up. Knowing that the weather was starting to deteriorate, we only stayed one more night.

We took the elk to Olson's in Enumclaw for final cutting and wrapped. I estimate we had around 350-400 lbs of meat.
« Last Edit: October 04, 2011, 11:07:34 PM by coyotewallace »

Online MADMAX

  • Trade Count: (+21)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 9367
  • Location: Kitsap/Cle Elum
  • I like big bucks and I can not lie
Re: First ML Bull(5x6) killed Oct.1 RimRock
« Reply #16 on: October 03, 2011, 11:58:20 AM »
Nice job and nice write up.
I hope someday to get one out whole.
Never argue with an idiot. They will drag you down to their level and beat you with experience.
Mark Twain


I Ain't Captain Walker.
I'm The Guy Who Carries Mr. Dead In His Pocket


What would life be without the thrill of the hunt ?

Offline Elkrunner

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2008
  • Posts: 2261
  • Location: Wenatchee
Re: First ML Bull(5x6) killed Oct.1 RimRock
« Reply #17 on: October 03, 2011, 11:59:27 AM »
Awesome!

Offline coyotewallace

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Mar 2010
  • Posts: 278
Re: First ML Bull(5x6) killed Oct.1 RimRock
« Reply #18 on: October 03, 2011, 01:09:28 PM »
pics suck but all I have is my cell right now





only bone hit was the off side rib

Offline RuttinWapati

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2010
  • Posts: 142
Re: First ML Bull(5x6) killed Oct.1 RimRock
« Reply #19 on: October 03, 2011, 01:13:16 PM »
Good Story.. Congrats and thanks for sharing.... :tup:
Far better it is to dare mighty things, to win glorious triumphs even though checkered by failure, than to rank with those poor spirits who neither enjoy nor suffer much because they live in the gray twilight that knows neither victory nor defeat.
Theodore Roosevelt

Offline huntitup

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Sep 2011
  • Posts: 30
  • Location: Oregon coast
Re: First ML Bull(5x6) killed Oct.1 RimRock
« Reply #20 on: October 03, 2011, 02:41:28 PM »
great job  nice bull

Offline coyotewallace

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Mar 2010
  • Posts: 278
Re: First ML Bull(5x6) killed Oct.1 RimRock
« Reply #21 on: October 03, 2011, 06:40:57 PM »
Thank  Ya Thank Ya

Offline BOWHUNTER45

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Nov 2009
  • Posts: 14731
Re: First ML Bull(5x6) killed Oct.1 RimRock
« Reply #22 on: October 03, 2011, 06:45:53 PM »
It will be a good taste  :chuckle: nice one  :tup:

Offline Skyvalhunter

  • Washington For Wildlife
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Oct 2007
  • Posts: 16010
  • Location: Sky valley/Methow
Re: First ML Bull(5x6) killed Oct.1 RimRock
« Reply #23 on: October 03, 2011, 06:47:42 PM »
Nice work congrats
The only man who never makes a mistake, is the man who never does anything!!
The further one goes into the wilderness, the greater the attraction of its lonely freedom.

Offline SkookumHntr

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 2900
  • Location: Tono, WA
Re: First ML Bull(5x6) killed Oct.1 RimRock
« Reply #24 on: October 03, 2011, 07:01:26 PM »
-Great Bull!!
IBEW89 RMEF MDF CCA

Offline coyotewallace

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Mar 2010
  • Posts: 278
Re: First ML Bull(5x6) killed Oct.1 RimRock
« Reply #25 on: October 03, 2011, 07:27:22 PM »
Thank  Ya Thank Ya

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: First ML Bull(5x6) killed Oct.1 RimRock
« Reply #26 on: October 03, 2011, 07:59:24 PM »
Great bull and I love the recovered bullet pics!

Offline coyotewallace

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Mar 2010
  • Posts: 278
Re: First ML Bull(5x6) killed Oct.1 RimRock
« Reply #27 on: October 03, 2011, 08:09:35 PM »
I wish everyone who could/would recover a slug would post pics of it as well as the critter.

Offline mulehunter

  • Washington For Wildlife
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2008
  • Posts: 3367
  • Location: Hobart, Wa
Re: First ML Bull(5x6) killed Oct.1 RimRock
« Reply #28 on: October 03, 2011, 09:07:26 PM »
very cool.

Mulehunter

Offline Lowedog

  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 2624
Re: First ML Bull(5x6) killed Oct.1 RimRock
« Reply #29 on: October 03, 2011, 09:16:41 PM »
Way to get it done!  Nice bull!!!
"Ethical behavior is doing the right thing when no one else is watching- even when doing the wrong thing is legal."
— Aldo Leopold

 


* Advertisement

* Recent Topics

Best all around muzzy (updated) by trophyhunt
[Today at 12:09:26 PM]


Westside muzzy bull by trophyhunt
[Today at 12:07:55 PM]


Leupold Display fade by royalbull
[Today at 12:06:30 PM]


I'm Going To Need Karl To Come up With That 290 Muley Sunscreen Bug Spray Combo by highside74
[Today at 11:41:09 AM]


Wa, Or & NW Regional Sanctioned Duck Calling Contest by Brute
[Today at 11:28:33 AM]


Brittany spaniel puppy by ghosthunter
[Today at 09:45:25 AM]


2025 Montana alternate list by tdot24
[Today at 08:24:52 AM]


10 years ago- Now by kball4
[Today at 07:33:37 AM]


Should I come back or find someplace else? by addicted1
[Yesterday at 11:24:45 PM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[Yesterday at 07:09:06 PM]


Up DATE!1993 Merc issues getting up on plane by EnglishSetter
[Yesterday at 06:57:24 PM]


2025 NWTF Jakes Day by wadu1
[Yesterday at 06:51:15 PM]


49 Degrees North Early Bull Moose by NOCK NOCK
[Yesterday at 05:28:30 PM]


Also looking for help deciding on a scope by dreadi
[Yesterday at 04:58:22 PM]


Need information on having a gunsmith thread a barrel for thin walled chokes. by Badhabit
[Yesterday at 02:37:23 PM]


How To Get Your $0.00 Tax Stamp - Black Hammer Arms by dreadi
[Yesterday at 02:34:04 PM]


Teanaway bull elk by Ridgerunner
[Yesterday at 01:55:35 PM]


Quinault Bear guide/help by blackdog
[Yesterday at 01:14:17 PM]


HUNTNNW 2025 trail cam thread and photos by Crunchy
[Yesterday at 11:20:34 AM]


Gots me a new/old rockchuck rifle coming by JDHasty
[July 12, 2025, 10:41:07 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal