Scope mounting kit

[addicted]

Looking for a scope mounting kit.

I know some of you have just collected the tools over the years but i have minimal asccess to a good manly tool store so i'm looking at a kit.

Hex bits, torx, tiny screwdrivers, and a torque driver are the key items i'm thinking i'll need but i realise that the kits usually come with a scope alignment/ honing tool as well.


Let me know what you have and what you suggest.

[JimmyHoffa]

One tool I've been looking at lately is called Level-Level-Level.  It has a small level that fits in the receiver to level the gun, then a level that attaches to the scope.  Adjust the bubble for both and crosshairs should be level. 

[addicted]

I ended up ordering a weaver professional scope mounting kit that comes with the torque driver, a level-level-level, and a ring lapping kit.

Also ordered a new gun vise.

[mazama]

I use one or two old screwdrivers that i have then step off back porch and see how it looks also a boresighter sometimes have probably done 25-30 guns this way,the farthest i have shot after this method is 700yds,after 40 years haven't changed.