collapse

Advertisement


Author Topic: Fletching jig question  (Read 7290 times)

Offline Button Nubbs

  • "Fish CSI"
  • Washington For Wildlife
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Mar 2010
  • Posts: 3862
  • Location: kenmore
Re: Fletching jig question
« Reply #15 on: March 28, 2012, 07:55:44 PM »
I'm actually a big fan of the ezfletch. It slams arrows out.
Team nubby!

Offline jechicdr

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Apr 2011
  • Posts: 574
  • Location: Spokane
Re: Fletching jig question
« Reply #16 on: March 28, 2012, 08:43:30 PM »
Any thoughts on the Arizona E-Z Fletch?

http://ezfletch.com/product.php?productid=2&cat=1&page=1

Traded the bitz for the E-Z Fletch Mini.  I used the regular size when I had 4 inch vanes.  Works well, 3 degree helical.  Starts to mess up after the glue starts to build up on it.  Easy cleanup though.  Just soaked it in acetone.  I think if you limit yourself to half a dozen or mop up the glue well between arrows and you could probably get a good dozen out.  I did 18 and I was cursing at it on the last 3 arrows (the vanes were starting to stick more to the jig, than the arrows.  Quicker, and a similar helical fletch to the Bohning jig, but not as clean.  The Bohning probably go through 2 dozen before glue became an issue as long as you cleaned it a bit between fletchings.  Someone needs to make those jigs out of something that does not stick to super glue.

Offline DoubleJ

  • YAR Nutcracker
  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 8550
  • Location: Shelton, WA
Re: Fletching jig question
« Reply #17 on: March 28, 2012, 09:40:32 PM »
Speaking of, is a fletching specific glue that much different than the regular old super glue I used for my inserts that are rock solid?

Offline Button Nubbs

  • "Fish CSI"
  • Washington For Wildlife
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Mar 2010
  • Posts: 3862
  • Location: kenmore
Re: Fletching jig question
« Reply #18 on: March 29, 2012, 12:50:51 AM »
I use gorilla impact tough super glue for inserts and fletchings. Best stuff i have found :twocents:
Team nubby!

Offline DoubleJ

  • YAR Nutcracker
  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 8550
  • Location: Shelton, WA
Re: Fletching jig question
« Reply #19 on: March 29, 2012, 07:58:55 AM »
I used this on my inserts and they have been solid.  Very impressed

http://www.officemax.com/office-supplies/tape-glue-adhesives/glue-adhesives/super-glue/product-ARS30499?cm_mmc=GBase-_-Office%20Supplies-_-Tape,%20Glue,%20and%20Adhesives-_-Glue%20and%20Adhesives&ci_src=14110944&ci_sku=07111877

Then my wife found it and has used it all over the house.  She likes the dispenser as it doesn't drip or squirt out a bunch of extra after you're done squeezing.

Offline wrongway

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2011
  • Posts: 299
  • Location: Toutle WA
Re: Fletching jig question
« Reply #20 on: March 29, 2012, 08:22:51 AM »
The best glue I have found is from AAC the max bond glue, I can do a doz arrows in less than an hour, then go right out and shoot them. I also use their vanes you never need to wipe them down with any cleaner.

Offline flinter

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jan 2012
  • Posts: 81
Re: Fletching jig question
« Reply #21 on: March 29, 2012, 09:16:28 AM »
I have been using a Jo-Jan multi fletcher for years, this year I tryed fletching tape instead of glue. I think the tape works great! If I was going to buy another fletcher it would be a single arrow jig and use fletching tape - no drying time, just keep fletching until arrows all fletched up. I used the tape on feathers not vanes but I think it would great on vanes as well.

Offline jechicdr

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Apr 2011
  • Posts: 574
  • Location: Spokane
Re: Fletching jig question
« Reply #22 on: March 29, 2012, 04:31:28 PM »
I used this on my inserts and they have been solid.  Very impressed

http://www.officemax.com/office-supplies/tape-glue-adhesives/glue-adhesives/super-glue/product-ARS30499?cm_mmc=GBase-_-Office%20Supplies-_-Tape,%20Glue,%20and%20Adhesives-_-Glue%20and%20Adhesives&ci_src=14110944&ci_sku=07111877

Then my wife found it and has used it all over the house.  She likes the dispenser as it doesn't drip or squirt out a bunch of extra after you're done squeezing.

The no run feature might make the EZ fletch work nice.  Most of the problem with glue buildup was as the glue rolled down, usually at the rear of the arrow.  Most of the fletching glues are super glue based.

Offline jechicdr

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Apr 2011
  • Posts: 574
  • Location: Spokane
Re: Fletching jig question
« Reply #23 on: March 29, 2012, 04:38:27 PM »
Anyone ever use the fletching tape for blazer vanes.  The Bohning site labels the fletching tape as "feather" fletching tape.  The vanes have the concave surface that I suspect might be hard to get the tape in and then it might not lay flat on the shaft.

Offline jechicdr

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Apr 2011
  • Posts: 574
  • Location: Spokane
Re: Fletching jig question
« Reply #24 on: March 29, 2012, 04:40:36 PM »
Someone should manufacture the shrink on vanes with helical vanes, and they should design "helical" blazers that you don't have to force into the configuration.

Offline DoubleJ

  • YAR Nutcracker
  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 8550
  • Location: Shelton, WA
Re: Fletching jig question
« Reply #25 on: March 29, 2012, 07:10:43 PM »
I used this on my inserts and they have been solid.  Very impressed

http://www.officemax.com/office-supplies/tape-glue-adhesives/glue-adhesives/super-glue/product-ARS30499?cm_mmc=GBase-_-Office%20Supplies-_-Tape,%20Glue,%20and%20Adhesives-_-Glue%20and%20Adhesives&ci_src=14110944&ci_sku=07111877

Then my wife found it and has used it all over the house.  She likes the dispenser as it doesn't drip or squirt out a bunch of extra after you're done squeezing.

The no run feature might make the EZ fletch work nice.  Most of the problem with glue buildup was as the glue rolled down, usually at the rear of the arrow.  Most of the fletching glues are super glue based.

This stuff is awesome at not running.  It sticks right where you put it.  If you see some at wal mart, grab a bottle and try it around the house.  I swear it's the only super glue I'll buy anymore

Offline DoubleJ

  • YAR Nutcracker
  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 8550
  • Location: Shelton, WA
Re: Fletching jig question
« Reply #26 on: March 29, 2012, 07:12:36 PM »
Someone should manufacture the shrink on vanes with helical vanes, and they should design "helical" blazers that you don't have to force into the configuration.

And make the shrink wrap ones cheaper.  If they weren't an average of $2-$3 each, I would buy them constantly.  It's getting too expensive to buy them anymore so that's why I started the thread.

Offline jechicdr

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Apr 2011
  • Posts: 574
  • Location: Spokane
Re: Fletching jig question
« Reply #27 on: March 29, 2012, 10:35:16 PM »
Someone should manufacture the shrink on vanes with helical vanes, and they should design "helical" blazers that you don't have to force into the configuration.

And make the shrink wrap ones cheaper.  If they weren't an average of $2-$3 each, I would buy them constantly.  It's getting too expensive to buy them anymore so that's why I started the thread.

I'd spend 2-3 dollars apiece if they came in helical.  It's a pain in the butt sometimes refletching arrows.  By the time you've spent a few dollars on super glue, vanes, fletching jigs, acetone, paper towels, Q-tips, time<--the big one...I think you'd be ahead of the game.

Offline DoubleJ

  • YAR Nutcracker
  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 8550
  • Location: Shelton, WA
Re: Fletching jig question
« Reply #28 on: March 29, 2012, 11:04:10 PM »
Maybe I'll stick with the twisters then.  The Quickspins do fly a bit better but not $14/dozen better

Offline DoubleJ

  • YAR Nutcracker
  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 8550
  • Location: Shelton, WA
Re: Fletching jig question
« Reply #29 on: March 30, 2012, 09:44:35 AM »
I thought about it all night and I just think I'm going to get a jig.  Think the price will balance out in the  long run.  Probably the short run the way I've been going through vanes lately

 


* Advertisement

* Recent Topics

where is everyone? by Ridgeratt
[Today at 01:32:55 PM]


Iceberg shrimp closed by Stein
[Today at 01:26:56 PM]


Unknown Suppressors - Whisper Pickle by pickardjw
[Today at 01:04:06 PM]


Buck age by muleyslayer
[Today at 12:09:13 PM]


Guessing there will be a drop in whitatail archers by hunter399
[Today at 12:05:49 PM]


Oregon special tag info by Doublelunger
[Today at 11:06:28 AM]


Ever win the WDFW Big Game Raffle? by Dhoey07
[Today at 06:54:48 AM]


Commercial crab pots going in today. by The scout
[Yesterday at 10:27:13 PM]


Missoula Fishing by jackelope
[Yesterday at 09:46:08 PM]


New fisher looking to catch some pinks this year by ASHQUACK
[Yesterday at 09:34:16 PM]


Desert Sheds by blindluck
[Yesterday at 09:03:55 PM]


10 kokes by Blacklab
[Yesterday at 07:05:26 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal