collapse

Advertisement


Author Topic: Nearly met my maker Sat  (Read 3240 times)

Offline Machias

  • Trapper
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Mar 2007
  • Posts: 18937
  • Location: Worley, ID
Nearly met my maker Sat
« on: October 14, 2013, 06:26:58 AM »
A huge thank you to Wade for putting this trip together and for showing me down the Lower Gauley. I had an absolute BLAST. I made it down 4 of the big Class V rapids with no problems. I will say Wade's cataraft tubes are very clean on the bottom. I got to inspect them in great detail and up close as I swam under them at Lower Mash rapid. Thanks to Justin for the rescue, thanks to, I think it was Wade yelling for me to swim hard away from an undercut rock. And thanks to the young man (sorry, I can't remember your name, who towed me across river and downstream to retrieve my cat. When I got up Saturday morning I got ready and discovered I'd left my scan disc to my camera in my computer, so I have no photos, but that probably actually saved camera as I'm sure it would have been tucked into my vest and been lost or ruined. I did Upper Mash rapid no problem then somewhere in Middle Mash rapid I either caught a underwater rock or a wave really caught my right side oar and jerked it clean out of my hand. By the time I recovered it I was lined up dead center of my right tube with Indecision Rock just sticking out of the surface. I hit the rock and the right tube slide up towards the sky, slowly at first and then dam quick. I plunged in backside first, felt my back hit a large rock, probably three feet below surface and hang there for a millisecond and then slide over the top. I remember thinking, oh that was lucky as I was surfacing. I found my upside down raft and manage to get a hand on the tube handle just in time to start my run on the Lower Mash rapid, a solid Class V rapid  . As I was going through Lower Mash I saw Wade's cat right in front of me. I could clearly see his cat hit a wall and stop. About that time my upside down cat and I slammed into his cat and I went under my tubes and came up and smashed the bottom of Wade's tubes and then I went under again and came up and for good measure smacked the bottom of his other tube. Then I heard someone, I think it was Wade, yelling at me to swim hard river right to avoid a big undercut rock, which I did. Then Justin rescued me to an eddie. I was fairly wiped out at that point. Walked a ways down the shore and then got a ride down river on the back of a kayak. Thank you everyone who helped me out, I appreciate it ALOT.  Pure Screaming Hell rapid (the last Class V rapid on the Lower Gauley) was my best rapid all day, had great lines down it and was very smooth, glad to have ended it on a good note. Supposedly there is some video of my flip, one of the commercial rafts was filming, I'll have to try and track it down.
Fred Moyer

When it's Grim, be the GRIM REAPER!

Offline Machias

  • Trapper
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Mar 2007
  • Posts: 18937
  • Location: Worley, ID
Re: Nearly met my maker Sat
« Reply #1 on: October 14, 2013, 06:28:47 AM »
Here is the Upper Mash, check out the video, at 47 seconds you will see the rock that flipped me.

http://www.gauleyriverrapids.com/upper-mash-rapid.html

In this video you can see I swam all the way from the top to the big hit at the bottom and then was just barely able to swim right of the huge undercut rock at the bottom.

http://www.gauleyriverrapids.com/lower-mash-rapid.html
Fred Moyer

When it's Grim, be the GRIM REAPER!

Offline X-Force

  • Solo Hunter
  • Political & Covid-19 Topics
  • Trade Count: (+8)
  • Old Salt
  • ******
  • Join Date: Sep 2007
  • Posts: 5567
Re: Nearly met my maker Sat
« Reply #2 on: October 14, 2013, 07:13:22 AM »
rafting is an absolute blast. I'll have to watch the videos later. at least you came out fairly unscathed.
People get offended at nothing at all. So, speak your mind and be unapologetic.

Offline quadrafire

  • Past Sponsor
  • Trade Count: (+5)
  • Old Salt
  • *****
  • Join Date: Sep 2009
  • Posts: 7121
  • Location: Spokane
Re: Nearly met my maker Sat
« Reply #3 on: October 14, 2013, 07:40:29 AM »
Dang Fred........ :yike:
Glad you made it out of that one!

Online jrebel

  • Non-Hunting Topics
  • Trade Count: (+24)
  • Explorer
  • ******
  • Join Date: Feb 2008
  • Posts: 11337
  • Location: East Wenatchee
Re: Nearly met my maker Sat
« Reply #4 on: October 14, 2013, 08:05:14 AM »
That story is giving me flashbacks.....I swam a class 3-4 rapid after falling out of my IK and thought it was over.  Hands down one of the scariest things I have ever done.  I thought for sure I was going to meat my maker that day. 

Glad you came out of it ok.  :tup:

Offline pianoman9701

  • Mushroom Man
  • Business Sponsor
  • Trade Count: (+5)
  • Legend
  • *****
  • Join Date: Mar 2011
  • Posts: 44795
  • Location: Vancouver USA
  • WWC, NRA Life, WFW, NAGR, RMEF, WSB, NMLS #2014743
    • www.facebook.com/johnwallacemortgage
    • John Wallace Mortgage
Re: Nearly met my maker Sat
« Reply #5 on: October 14, 2013, 08:17:18 AM »
Fred, you need to come back to us alive, you know. This wouldn't have happened on a mule! Glad you're OK.  :tup:
"Restricting the rights of law-abiding citizens based on the actions of criminals and madmen will have no positive effect on the future acts of criminals and madmen. It will only serve to reduce individual rights and the very security of our republic." - Pianoman https://linktr.ee/johnlwallace https://valoaneducator.tv/johnwallace-2014743

Offline Machias

  • Trapper
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Mar 2007
  • Posts: 18937
  • Location: Worley, ID
Re: Nearly met my maker Sat
« Reply #6 on: October 14, 2013, 08:42:41 AM »
Thanks guys!

Yea I could never get my mule to wear a PFD!!  :) :)
Fred Moyer

When it's Grim, be the GRIM REAPER!

 


* Advertisement

* Recent Topics

A. Cole Lockback in AEB-L and Micarta by A. Cole
[Today at 09:15:34 AM]


Willapa Hills 1 Bear by hunter399
[Today at 08:24:48 AM]


Unit 364 Archery Tag by pcveen
[Today at 08:18:37 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by Threewolves
[Today at 06:35:57 AM]


In the background by nwwanderer
[Today at 05:33:06 AM]


1993 Merc issues getting up on plane by addicted1
[Yesterday at 09:02:37 PM]


Sockeye Numbers by Southpole
[Yesterday at 09:02:04 PM]


3 pintails by Dan-o
[Yesterday at 07:20:12 PM]


Selkirk bull moose. by moose40
[Yesterday at 05:42:19 PM]


North Peninsula Salmon Fishing by Buckhunter24
[Yesterday at 12:43:12 PM]


2025 Crab! by trophyhunt
[Yesterday at 11:09:27 AM]


erronulvin trail cam photos by kodiak06
[Yesterday at 10:19:35 AM]


Yard babies by Feathernfurr
[Yesterday at 09:55:24 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal