collapse

Advertisement


Author Topic: Finding good "node"  (Read 4434 times)

Offline Magnum_Willys

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 4017
Re: Finding good "node"
« Reply #30 on: February 14, 2020, 09:37:40 PM »
I can shoot 1” groups at 100 yards and 1.5” at 300.    Few people see smaller actual groups at distance but its common to see smaller moa at 300 vs 100 with long bullets that do take a bit to stabilize.  You wont see this with standard bullets just the 300 grainers or maybe long 230’s. 

Offline Cheif

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2020
  • Posts: 58
  • Location: Montesano
Re: Finding good "node"
« Reply #31 on: February 14, 2020, 09:40:48 PM »
I can shoot 1” groups at 100 yards and 1.5” at 300.    Few people see smaller actual groups at distance but its common to see smaller moa at 300 vs 100 with long bullets that do take a bit to stabilize.  You wont see this with standard bullets just the 300 grainers or maybe long 230’s.

Oh you've done it now!!! Haven't you heard of physics????????  Yes, you are correct, thank you

Online Jonathan_S

  • Trade Count: (+4)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8281
  • Location: Medical Lake
  • Volleyfire Brigade
Re: Finding good "node"
« Reply #32 on: February 14, 2020, 09:46:19 PM »
How do bullets hone in to center after they stabilize downrange?
“Kindly do not attempt to cloud the issue with too many facts.”

Offline BULLBLASTER

  • Chris McCarthy
  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+13)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 7468
  • Volleyfire brigade
Re: Finding good "node"
« Reply #33 on: February 14, 2020, 09:48:41 PM »
I can shoot 1” groups at 100 yards and 1.5” at 300.    Few people see smaller actual groups at distance but its common to see smaller moa at 300 vs 100 with long bullets that do take a bit to stabilize.  You wont see this with standard bullets just the 300 grainers or maybe long 230’s.
The “I can shoot” is the important part there. It is not that the gun is more accurate at longer distance it is that you, the shooter are doing something different. Maybe you concentrate better at longer distance? Or parallax is less? Something like that. If you could set up a target at 100 and shoot through that target to one at 300 I can assure you that the group printed on the 300 yard paper will not be a smaller angular dispersion than that of the 100 yard target. There is just no way that a bullet knows where it needs to “settle” in to. Once that bullet leaves the muzzle it is set in that direction until an outside force affects it.

Offline Cheif

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2020
  • Posts: 58
  • Location: Montesano
Re: Finding good "node"
« Reply #34 on: February 14, 2020, 09:59:33 PM »
What's the answer then? Faster twist?

Offline Magnum_Willys

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 4017
Re: Finding good "node"
« Reply #35 on: February 14, 2020, 10:01:56 PM »
It may be positive compensation, stabilization, parallax or just a finer crosshairs at distance but regardless I find load development at 300 yards to be more applicable to long distance load development than shooting at 100 yards.    I’ve had loads that one-hole at 100 that were much worse at 1000 than loads that were not as good at 100.   

Offline Cheif

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2020
  • Posts: 58
  • Location: Montesano
Re: Finding good "node"
« Reply #36 on: February 14, 2020, 10:04:59 PM »
Truth willys...

Offline BULLBLASTER

  • Chris McCarthy
  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+13)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 7468
  • Volleyfire brigade
Re: Finding good "node"
« Reply #37 on: February 14, 2020, 10:08:48 PM »
I won’t disagree that testing loads at a greater distance is better. I’ve seen some very small 100 yard groups that wouldn’t shoot for crap at further distances. Take the group i posted earlier in this thread for example. Almost 200 FPS velocity spread still grouped sub moa at 100.
I just don’t buy that a further target can consistently have a smaller angular group for the same shots fired.

Offline Cheif

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2020
  • Posts: 58
  • Location: Montesano
Re: Finding good "node"
« Reply #38 on: February 14, 2020, 10:10:33 PM »
Triple digit spread??? Wow

Offline Cheif

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2020
  • Posts: 58
  • Location: Montesano
Re: Finding good "node"
« Reply #39 on: February 14, 2020, 10:11:46 PM »
200 fps at that??? Good god!!! What powder???

Offline BULLBLASTER

  • Chris McCarthy
  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+13)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 7468
  • Volleyfire brigade
Re: Finding good "node"
« Reply #40 on: February 15, 2020, 06:28:42 AM »
200 fps at that??? Good god!!! What powder???
It was a ladder working up from fireforming to full load in an Ackley improved chambering. Using h4895 the last time I chronod my finished load I had an es of 12 over w
10 rounds

Offline jasnt

  • Predator hunter
  • Political Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 5945
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: Finding good "node"
« Reply #41 on: February 15, 2020, 08:18:55 AM »
I’ve heard many different people talk about better grouping at 2-300 that one hundred. Brian litz talks about this in his book. Yaw typically from bullets not be spun fast enough at the muzzle but rpm speed degrades slower than velocity.  Never seen it my self as I always go with “too fast of twist”.

When I start load development I start with seating depth and a low charge.  Load in increments from mag length or .015” off in .030” steps
Choose the best one and shoot over the chrono and find the velocity flat spots.  Fine tune seating depth in .005” increments if I’m not happy already.   

Maybe I’ve been lucky but I’ve never not found a 1/2 moa load in any rifle I’ve loaded for except for the rifles that I had burned out the barrel. 

Some folks have warned me going too fast twist can blow up bullets but I have yet to see it my self.  Recently I worked up a load in my 7 twist 243 and 62gr Berger target bullets at 3960.   They shoot great even at 735 yards.   Also played with a few 58gr vmax at over 4K and they hit the 400 no problem.   

Jme
243Round ct. 126
338rc 773
338 lapua rc 200
37XC rc 219
2020 Rifle rc 362

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

Offline wooltie

  • Washington For Wildlife
  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 434
  • Location: Whatcom
Re: Finding good "node"
« Reply #42 on: June 05, 2020, 01:22:42 PM »
I had a m70, stock barrel that wouldn't group less than 1.5"  Even sent the gun to winnie to have the barrel evaluated.  They evaluated and lapped the barrel, sent it back to me.  No change in performance.

I swapped the barrel for a benchmark.

Kept everything the same - rifle stock, bullets, powder, shooting rests -- and the gun shoots moa or better now.

FYI I use Jason's method to find a load.  Works great.

Offline ConnieJFerrante

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jul 2020
  • Posts: 1
  • Location: Bedford, NH
    • Foundry Outdoors
Re: Finding good "node"
« Reply #43 on: July 06, 2020, 10:56:54 PM »
You can give a try from here:https://www.foundryoutdoors.com/

 


* Advertisement

* Recent Topics

Charles and Mary Eder unit of the Scotch Creek permit by SkookumHntr
[Today at 10:21:13 AM]


7 calves attacked yesterday by idahohuntr
[Today at 10:20:12 AM]


WTS RCBS dies by Woodchuck
[Today at 10:16:26 AM]


Raffle Sales by Jonathan_S
[Today at 10:14:52 AM]


WDFW Mule Deer Survey by TriggerMike
[Today at 10:07:19 AM]


Who owns a stream? by birddogdad
[Today at 10:05:36 AM]


Pre purchase questions on a 23' glasply by syoungs
[Today at 09:53:49 AM]


How much ammo? by theleo
[Today at 09:23:22 AM]


Over 65 GMU's - best Deer hunting recommendations? by Jekemi
[Today at 08:52:18 AM]


Deer projections for 2020 by Jekemi
[Today at 08:42:31 AM]


Cabela's Alaknak 12-ft. x 12-ft. Tent by tecwoody
[Today at 08:29:08 AM]


What is the best way to dig soft shell clams? by KP-Skagit
[Today at 08:05:25 AM]


Divorce and getting rid of a lot by LEN
[Today at 07:49:44 AM]


Kifaru Hunting Frame by buckhunter
[Today at 07:45:28 AM]


WTB-Slug Gun by Macs B
[Today at 07:36:57 AM]


No Kettle Range tag holders? by nwhunter
[Today at 07:17:32 AM]


Difference between cheap Winchester shells and Black Cloud on the inside of thes by Bill W
[Today at 07:02:13 AM]


What will he score? by Skyvalhunter
[Today at 06:49:35 AM]


Hybrid deer by scoutdog346
[Today at 04:52:43 AM]


Archery Entiat by scoutdog346
[Today at 04:51:24 AM]