collapse

Advertisement


Author Topic: Help me mount my cannon downriggers…  (Read 1350 times)

Offline Boot

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: May 2015
  • Posts: 45
  • Location: Puyallup, WA
Help me mount my cannon downriggers…
« on: January 28, 2022, 12:56:42 PM »
I recently bought a new to me 18 foot Stipper with had cannon down rigger mounts located on the back transom. Couple of problems I noticed with that. One they sit so far back that it makes if a paint to get to the gear that is now dragging behind the boat when the rigged are up. And second it’s a pain to get to the kicker with one of the riggers sits right in front of it when setup. So I would like to know the forward and onto the gunnels. Problem with that is that my gunnels are narrower than the mounting plates for the riggers. Anyone have any ideas on how to Mount these. I am thinking I may need to have some custom brackets made. Anyone ran into this before? Any help is appreciated!


Offline NRA4LIFE

  • Site Sponsor
  • Past Sponsor
  • Trade Count: (+10)
  • Old Salt
  • *****
  • Join Date: Nov 2007
  • Posts: 6057
  • Location: Maple Valley
  • Groups: NRA
Re: Help me mount my cannon downriggers…
« Reply #1 on: January 28, 2022, 01:02:43 PM »
I had to build a custom aluminum L-shaped mount for my Smokercraft that mounted to the side of the gunnel.  That's what I would do.  Use a non-corrosive aluminum like 6061.
Look man, some times you just gotta roll the dice

Offline Skillet

  • Business Sponsor
  • Trade Count: (+43)
  • Old Salt
  • *****
  • Join Date: Jun 2009
  • Posts: 5823
  • Location: Sitka, AK
Re: Help me mount my cannon downriggers…
« Reply #2 on: January 28, 2022, 01:12:05 PM »
Like this.

Pocket mounts to the gunnel, bracket to the downrigger.

I've got one I'm going to sell, but John's in Everett used to carry them.
KABOOM Count - 1

"The ocean is calling, and I must go."

"Does anyone know where the love of God goes, when the waves turn the minutes to hours?"
     - Gordon Lightfoot

Offline NRA4LIFE

  • Site Sponsor
  • Past Sponsor
  • Trade Count: (+10)
  • Old Salt
  • *****
  • Join Date: Nov 2007
  • Posts: 6057
  • Location: Maple Valley
  • Groups: NRA
Re: Help me mount my cannon downriggers…
« Reply #3 on: January 28, 2022, 01:31:32 PM »
Do that.  That's pretty much exactly what I built, except for the little pocket thing.  I hard mounted the L-shaped portion to the gunnel.
Look man, some times you just gotta roll the dice

Offline Boot

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: May 2015
  • Posts: 45
  • Location: Puyallup, WA
Re: Help me mount my cannon downriggers…
« Reply #4 on: January 28, 2022, 02:24:46 PM »
Thanks guys. I think that will work well!

Offline hunthard

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Feb 2016
  • Posts: 596
  • Location: western wa
Re: Help me mount my cannon downriggers…
« Reply #5 on: January 28, 2022, 03:05:50 PM »
You can go to youtube and search for idea's too, post up some pictures of the finished job :tup:

Offline goldenhtr

  • Non-Hunting Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jun 2007
  • Posts: 342
Re: Help me mount my cannon downriggers…
« Reply #6 on: January 28, 2022, 04:18:13 PM »
Like this.

Pocket mounts to the gunnel, bracket to the downrigger.

I've got one I'm going to sell, but John's in Everett used to carry them.

This is what I have on my 17' Marage
Gen:27:3

 


* Advertisement

* Recent Topics

Looking for Solid 22 LR input by EnglishSetter
[Today at 03:13:54 PM]


WSTA 2025 Summer Rendezvous Agenda by Humptulips
[Today at 03:09:35 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by rainshadow1
[Today at 03:01:42 PM]


2025 Montana alternate list by JBar
[Today at 02:20:40 PM]


Rotator Cuff repair X 2 advice needed by Wood2Sawdust
[Today at 01:36:26 PM]


Rock creek gone? Next? by JBar
[Today at 01:00:56 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by teanawayslayer
[Today at 12:45:43 PM]


Archery elk gear, 2025. by pcveen
[Today at 09:35:38 AM]


2025 Canning by blackpowderhunter
[Today at 07:19:25 AM]


Lynx kittens confirmed in the Kettle Range by dwils233
[Today at 12:04:14 AM]


How To Get Your $0.00 Tax Stamp - Black Hammer Arms by dreadi
[Yesterday at 11:33:25 PM]


Seeking recommendations on a new scope by Klickitatsteelie
[Yesterday at 09:23:56 PM]


First attempt at polish sausages by Stein
[Yesterday at 07:58:22 PM]


Sockeye Numbers by Southpole
[Yesterday at 07:44:30 PM]


Best all around muzzy (updated) by jjhunter
[Yesterday at 07:44:26 PM]


38% increase in fishing and hunting licenses by Sitka_Blacktail
[Yesterday at 07:02:41 PM]


50 inch SXS and Tracks? by 92xj
[Yesterday at 05:34:03 PM]


3 days for Kings by MADMAX
[Yesterday at 05:06:49 PM]


Full moon and last week of September by pd
[Yesterday at 04:51:23 PM]


Hunting bears in the thick stuff by ghosthunter
[Yesterday at 04:33:46 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal