collapse

Advertisement


Author Topic: Anyone casting their own Lingcod and Halibut jigs?  (Read 2247 times)

Offline Hilltop123

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2011
  • Posts: 2088
  • Location: Up on the Ump
Anyone casting their own Lingcod and Halibut jigs?
« on: March 20, 2023, 07:42:19 AM »
I was playing with idea of cast my own jig heads, for saltwater fishing. I was wondering if someone on here was doing this and what brand mold are you using or recommend.  What size in ounce's do you make? Anyway, just something I was kicking around. Wanted to hear others thought and input.

Offline GWP

  • Forum Sponsor
  • Trade Count: (+23)
  • Sourdough
  • *****
  • Join Date: Dec 2010
  • Posts: 1526
  • Location: Big Sandy-By Westport
Re: Anyone casting their own Lingcod and Halibut jigs?
« Reply #1 on: March 20, 2023, 07:58:26 AM »
People have been pouring lead into pinched end copper pipe to make them for a long time. No mold needed. There are a bunch of vids of people making them.
Cuterebra are NOT cute!

Offline metlhead

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2014
  • Posts: 1361
  • Location: sw wa
Re: Anyone casting their own Lingcod and Halibut jigs?
« Reply #2 on: March 20, 2023, 08:34:21 AM »
Made a bunch from copper pipe. I'll get some pics for ya. I think they'll do great this year. Ling pipes come out to 14oz and the halis are 40oz.

Offline Hilltop123

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2011
  • Posts: 2088
  • Location: Up on the Ump
Re: Anyone casting their own Lingcod and Halibut jigs?
« Reply #3 on: March 20, 2023, 08:52:54 AM »
Would love to see them.

Offline Fidelk

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Jul 2016
  • Posts: 4148
  • Location: Sequim, WA
  • Groups: NRA, JCSA
Re: Anyone casting their own Lingcod and Halibut jigs?
« Reply #4 on: March 20, 2023, 08:55:19 AM »
I don't cast jigs but have been using an old one that I bought decades ago for bottom fishing and have been using out of La Push and it has been very productive on lingcod and halibut.

The photo of the jig is close to what I've been using. ****I don't believe that these are available in the 26 oz. size any longer.

https://www.evike.com/products/65622/

Dimensions:

9 1/2" long

2" wide (at the widest point, in the middle......narrowing on both ends)

1" thick (at the widest point, in the middle.......thinning towards both ends)

Flat on one side......rounded on the other.

26 ounces

Reddish orange color

10/0 Treble hook

This has been used 30 miles out from La Push (600-700 feet) and has hooked both halibut and lingcod. The bottom must have been sand and gravel because I haven't lost it on rocky bottom structure. I think that it's made of iron and the 26 ounces gets down there and doesn't tangle with 2 lb. leads, if those are also in use by others on the boat. Bottom line: this shape and weight has been productive. Just passing along what I've seen work on the species that you are hunting.

Offline dilleytech

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jul 2014
  • Posts: 1537
  • Location: Columbia gorge washington
Re: Anyone casting their own Lingcod and Halibut jigs?
« Reply #5 on: March 20, 2023, 11:22:31 AM »
Ya pipe jigs. Best jig you can pour.

Offline knighttime25

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: Nov 2015
  • Posts: 177
  • Location: Mount Vernon
Re: Anyone casting their own Lingcod and Halibut jigs?
« Reply #6 on: March 20, 2023, 11:47:16 AM »
The Do-It molds work great for near shore lingcod tackle. We make our own jig heads from 3/8 oz all the way to 3 oz. Cheap and easy if you have the lead available  :tup:

Offline Longfield1

  • Non-Hunting Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Apr 2022
  • Posts: 151
  • Location: Maple Valley
Re: Anyone casting their own Lingcod and Halibut jigs?
« Reply #7 on: March 20, 2023, 11:54:53 AM »
Ive done pipe jigs and bullet jigs

Bullet jigs 4 oz 8 oz 10 oz 12 oz 16 oz

Pipe jigs super easy also, i got end caps on mine because it looked cleaner and made the pipes fall straight rather than crimping it.

I just recently starting pouring my own soft plastics too which is also pretty fun.

I use the Do-It mold for the 4 oz and then a custom one off ebay for the 8-16 ounce.

Offline Hilltop123

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2011
  • Posts: 2088
  • Location: Up on the Ump
Re: Anyone casting their own Lingcod and Halibut jigs?
« Reply #8 on: March 20, 2023, 02:38:55 PM »
Ive done pipe jigs and bullet jigs

Bullet jigs 4 oz 8 oz 10 oz 12 oz 16 oz

Pipe jigs super easy also, i got end caps on mine because it looked cleaner and made the pipes fall straight rather than crimping it.

I just recently starting pouring my own soft plastics too which is also pretty fun.

I use the Do-It mold for the 4 oz and then a custom one off ebay for the 8-16 ounce.
You doing the injection type molds or the pour in's, for your soft plastics.

Offline Hilltop123

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2011
  • Posts: 2088
  • Location: Up on the Ump
Re: Anyone casting their own Lingcod and Halibut jigs?
« Reply #9 on: March 20, 2023, 02:40:24 PM »
Pipe jigs were already on the list. Was wanting insight on the jig molds. Seems like a good winter time hobby.

Offline Jake Dogfish

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2017
  • Posts: 3406
  • Location: Des Moines
Re: Anyone casting their own Lingcod and Halibut jigs?
« Reply #10 on: March 20, 2023, 02:45:05 PM »
Iím pretty cheap on most things, but I donít have any interest in playing with lead.  eBay has jigs in nearly every style and weight.  Iíd rather use cheap rods and reels and have someone else pour the lead.  Good luck.
Environmentalist Fundamentalist

Offline GWP

  • Forum Sponsor
  • Trade Count: (+23)
  • Sourdough
  • *****
  • Join Date: Dec 2010
  • Posts: 1526
  • Location: Big Sandy-By Westport
Re: Anyone casting their own Lingcod and Halibut jigs?
« Reply #11 on: March 20, 2023, 03:03:48 PM »
Pouring your own fishing stuff is another rabbit hole. I can remember when I got one to pour because Ďthat is all I really needí.
Yeah right.
Cuterebra are NOT cute!

Offline hiway_99

  • Business Sponsor
  • Trade Count: (+8)
  • Scout
  • *****
  • Join Date: Mar 2011
  • Posts: 418
  • Location: Seabeck
    • https://m.facebook.com/100088313187853/
Re: Anyone casting their own Lingcod and Halibut jigs?
« Reply #12 on: March 20, 2023, 03:52:11 PM »
I pour pipe jigs and 24oz bullet head jigs.  I've seen guys make knock off Norwegian jigs out of lead.  Not sure how they worked compared to the real deal Norwegian jigs

Sent from my SM-S918U using Tapatalk


Offline Fidelk

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Jul 2016
  • Posts: 4148
  • Location: Sequim, WA
  • Groups: NRA, JCSA
Re: Anyone casting their own Lingcod and Halibut jigs?
« Reply #13 on: March 21, 2023, 08:52:09 AM »
hilltop, your inbox is full.

Offline Longfield1

  • Non-Hunting Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Apr 2022
  • Posts: 151
  • Location: Maple Valley
Re: Anyone casting their own Lingcod and Halibut jigs?
« Reply #14 on: March 21, 2023, 08:57:35 AM »
Ive done pipe jigs and bullet jigs

Bullet jigs 4 oz 8 oz 10 oz 12 oz 16 oz

Pipe jigs super easy also, i got end caps on mine because it looked cleaner and made the pipes fall straight rather than crimping it.

I just recently starting pouring my own soft plastics too which is also pretty fun.

I use the Do-It mold for the 4 oz and then a custom one off ebay for the 8-16 ounce.
You doing the injection type molds or the pour in's, for your soft plastics.


Both, I dont like the open pours as the injection is much faster and easier.

 


* Advertisement

* Recent Topics

2nd bear tag by E_daniels97
[Yesterday at 11:37:51 PM]


Beaver trapping opportunity near Randle by redi
[Yesterday at 11:32:20 PM]


COUGAR COMMENT TIME by Scruffy
[Yesterday at 10:46:07 PM]


Form 4 - Two Day Approval by 6haase6
[Yesterday at 10:28:58 PM]


Not a lot of love for Colorado wolves! by Dan-o
[Yesterday at 09:22:30 PM]


Travel Trailer Damage? by storyteller
[Yesterday at 09:07:22 PM]


18 year old daughter drew 204 quality deer by Jlittlebear31
[Yesterday at 08:50:37 PM]


Biscuits and Gravy? I'm your huckleberry.... :-) by JDArms1240
[Yesterday at 07:56:16 PM]


Mineral sites and bears by dilleytech
[Yesterday at 07:48:23 PM]


Muzzy Mission Quality!!! by blindluck
[Yesterday at 07:39:19 PM]


Blackhorn 209 by JasonG
[Yesterday at 07:29:19 PM]


Ryderwood Cow Tag by Sundance
[Yesterday at 05:11:15 PM]


Vancouver Lake worth it? (Shillapoo) by medic6
[Yesterday at 12:09:26 PM]


Summer Salmon by Dan-o
[Yesterday at 10:41:08 AM]


Washington State Rocky Mountain Bighorn Raffle by GurrCentral
[Yesterday at 10:17:41 AM]


2024 Trips by 10mmg
[Yesterday at 09:54:40 AM]


1x Muzzleloader Scope by GWP
[Yesterday at 09:31:17 AM]


NW Mountain challenge by BLDtraLR
[Yesterday at 08:24:06 AM]


Fín rats by Boss .300 winmag
[Yesterday at 08:04:57 AM]


Bearpaw Season - Spring 2024 by nwwanderer
[Yesterday at 05:22:28 AM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal