collapse

Advertisement


Author Topic: McGuire Ballistics 168 Copper Rose  (Read 3954 times)

Offline meat_in_the_pot3

  • Business Sponsor
  • Trade Count: (+5)
  • Hunter
  • *****
  • Join Date: Oct 2010
  • Posts: 145
  • Location: Coulee Dam, WA
    • Double U Hunting Supply
Re: McGuire Ballistics 168 Copper Rose
« Reply #15 on: June 07, 2023, 11:49:33 PM »
The bullet itself is longer than a 190 as well- longer than a 190 berger hybrid anyhow-I am not sure on the A tip length off the top of my head but it is a fair amount longer than a 190 berger


Sent from my iPhone using Tapatalk
James Van Geystel
509-481-0810

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 12974
  • Location: Arlington
Re: McGuire Ballistics 168 Copper Rose
« Reply #16 on: June 08, 2023, 06:22:39 AM »
Man, they are long.  I think the a-tips are 1.668 or so and they were considered long when they came out.

Offline jrebel

  • Non-Hunting Topics
  • Trade Count: (+24)
  • Explorer
  • ******
  • Join Date: Feb 2008
  • Posts: 11346
  • Location: East Wenatchee
Re: McGuire Ballistics 168 Copper Rose
« Reply #17 on: June 08, 2023, 08:06:47 AM »
After quite a bit of research....I see three problems for most peoples use. 

1.  They are super long so in most rifles they will become a single feed as they won't fit in the magazine.
2.  On the website it list them as easily damaged by impact and not recommended for use in magazines even if they do fit....unless you have a good amount of room from tip of bullet to mag box.  With that being said, the website is super confusing to me and it says it has some that are mag sensitive and others that are not??? 
3.  The recommended twist for is not conducive to most factory 7mm barrels.  This is a likely a fantastic bullet for custom rifles, but not so much if you have a factory rifle with a 1:9 or 1:10 twist barrel in your 7mm mag. 

I'm sure the manufacturer could make a lighter bullet that would work in a standard twist barrel, but the BC would drop off the charts.   With that said, the BC of .800 to me is not necessary for 99.9% of all shooters.  I have no problem pushing bullets with a .500 to 800 yards and beyond with 1/2 MOA accuracy. 

It is a super cool bullet, but very niche in my opinion.  If I had a custom 7mm chambering with a 1:7.5 or 1:8 twist, I would likely be giving them a try.....just cause I like new fandangled bullets. 

Offline kentrek

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Mar 2012
  • Posts: 3495
  • Location: west coast
Re: McGuire Ballistics 168 Copper Rose
« Reply #18 on: June 09, 2023, 08:05:03 AM »
Is there any chance someone could cut one of these in half and give us a cross section look

Pretty intriguing with that bc

 


* Advertisement

* Recent Topics

Looking for Solid 22 LR input by Rat44
[Today at 12:26:36 AM]


Lynx kittens confirmed in the Kettle Range by dwils233
[Today at 12:04:14 AM]


Archery elk gear, 2025. by spin05
[Today at 12:03:42 AM]


How To Get Your $0.00 Tax Stamp - Black Hammer Arms by dreadi
[Yesterday at 11:33:25 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Rainier10
[Yesterday at 10:19:01 PM]


Seeking recommendations on a new scope by Klickitatsteelie
[Yesterday at 09:23:56 PM]


2025 Canning by Twispriver
[Yesterday at 09:15:12 PM]


2025 Montana alternate list by Edminsterquality
[Yesterday at 08:47:06 PM]


WSTA 2025 Summer Rendezvous Agenda by Trapper John
[Yesterday at 08:00:27 PM]


First attempt at polish sausages by Stein
[Yesterday at 07:58:22 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by MADMAX
[Yesterday at 07:57:22 PM]


Sockeye Numbers by Southpole
[Yesterday at 07:44:30 PM]


Best all around muzzy (updated) by jjhunter
[Yesterday at 07:44:26 PM]


38% increase in fishing and hunting licenses by Sitka_Blacktail
[Yesterday at 07:02:41 PM]


50 inch SXS and Tracks? by 92xj
[Yesterday at 05:34:03 PM]


3 days for Kings by MADMAX
[Yesterday at 05:06:49 PM]


Full moon and last week of September by pd
[Yesterday at 04:51:23 PM]


Hunting bears in the thick stuff by ghosthunter
[Yesterday at 04:33:46 PM]


GMU 247 Entiat bear hunting by Ridgerunner
[Yesterday at 11:56:01 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal