collapse

Advertisement


Author Topic: What is the problem w my .300 blackout w suppressor.?  (Read 2882 times)

Offline swanderek

  • Business Sponsor
  • Trade Count: (+10)
  • Hunter
  • *****
  • Join Date: Nov 2019
  • Posts: 195
  • Location: Arlington
Re: What is the problem w my .300 blackout w suppressor.?
« Reply #30 on: May 25, 2024, 07:20:21 AM »
I  went through this was psa.
Probably an undersized gas port or rough chamber causing issues.
Buffer isn’t gonna help with that

Offline trophyhunt

  • Forum Sponsor
  • Trade Count: (+11)
  • Explorer
  • *****
  • Join Date: Nov 2008
  • Posts: 19044
  • Location: Wetside
  • Groups: Wa Wild Sheep Life Member
Re: What is the problem w my .300 blackout w suppressor.?
« Reply #31 on: May 25, 2024, 07:57:55 AM »
Well crap, guess I’ll have extra buffers laying around, already ordered it.  The gun guy said it was ejecting too fast, but not knowing these types of guns at all I went with his idea.  With my standard buffer, it was ejecting but smashing the new round in half. 
“In common with”..... not so much!!

Offline OltHunter

  • Non-Hunting Topics
  • Trade Count: (+9)
  • Scout
  • ****
  • Join Date: May 2007
  • Posts: 437
Re: What is the problem w my .300 blackout w suppressor.?
« Reply #32 on: May 25, 2024, 08:50:03 AM »
Yeah, H2 not ejecting is showing not enough gas or too heavy buffer! But carbine buffer was showing too much gas or not enough buffer. Maybe we misinterpreted your first issue as too much gas and cycling too fast as not enough gas. Maybe without the gas it wasn't clearing all that yellow junk out and the tips were getting smashed cause it wasn't cycling back quite enough.

You do have a weird, non standard issue though unfortunately. Cans usually are adding more gas and pressure so you need to up your cycling weights.

I wasn't right with my first assessment. But I do agree that a H3 wouldn't help if H2 didn't help. It would fix the crushing cause I think a H3 would put it to a single shot!

I'm also leaning toward a gas issue. It shouldn't be that hard to fix issues with subs and a can, the fact that is has for you means something more involved or harder to fix is going on.



Offline trophyhunt

  • Forum Sponsor
  • Trade Count: (+11)
  • Explorer
  • *****
  • Join Date: Nov 2008
  • Posts: 19044
  • Location: Wetside
  • Groups: Wa Wild Sheep Life Member
Re: What is the problem w my .300 blackout w suppressor.?
« Reply #33 on: May 25, 2024, 10:50:37 AM »
Great, I should have mentioned the last time I shot it, I took the can off.  Maybe my next step should be an adjustable gas block?  And the next after that….throw it in the ocean!!
“In common with”..... not so much!!

Offline elkrack

  • Framer
  • Trade Count: (+18)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3498
  • Location: bonney lake
Re: What is the problem w my .300 blackout w suppressor.?
« Reply #34 on: May 25, 2024, 01:43:51 PM »
Great, I should have mentioned the last time I shot it, I took the can off.  Maybe my next step should be an adjustable gas block?  And the next after that….throw it in the ocean!!

I think you should go with that latter so we all can get a good chuckle :chuckle:
life's tough its tougher if your stupid (john wayne)

If you ain’t first your last☝🏻

Offline dreadi

  • Business Sponsor
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Aug 2016
  • Posts: 1099
  • Location: Tacoma
    • http://www.facebook.com/blackhammerarms
    • Black Hammer Arms
Re: What is the problem w my .300 blackout w suppressor.?
« Reply #35 on: May 25, 2024, 03:30:48 PM »
I've read this thread a few times to make sure i had not missed anything before commenting again.

It's appears to me that you have not determined what some of the parts are that you are working with. We don't know what buffer weight or buffer spring you started with. Those are some key components that need be known before throwing money at the problem.

Have you determined if the gas block you have is correctly installed?  If the gas block is not installed correctly, you could be experiencing a reduction in gas flow.

This is far fetched...do you have the correct gas tube installed?

I saw it mentioned and it's worth checking the gas port on the barrel and see if it's in spec. It's also worth checking that your chamber is in spec as previously mentioned.

If you have all standard carbine spec parts and all parts are in spec, then your firearm is most likely not compatible with those Hornady Sub X rounds


BLACK HAMMER ARMS
07/02 NFA Dealer

http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms
BLACK HAMMER ARMS
Buy A Suppressor http://www.silencershop.com/blackhammerarms
1911 Pistolsmithing
Firearm Refinishing
GLOCK Certified Armorer
CMMG Authorized Dealer
NEMO Arms Authorized Dealer
http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms/

Offline trophyhunt

  • Forum Sponsor
  • Trade Count: (+11)
  • Explorer
  • *****
  • Join Date: Nov 2008
  • Posts: 19044
  • Location: Wetside
  • Groups: Wa Wild Sheep Life Member
Re: What is the problem w my .300 blackout w suppressor.?
« Reply #36 on: May 25, 2024, 04:05:48 PM »
Because of laws, well, the upper was purchased complete and I’m not sure what exactly each part is.  I’ll tear it down and see if I can get better info.   It was supposed to be all aero precision, but it isn’t stamped on the barrel anywhere. 
“In common with”..... not so much!!

Offline trophyhunt

  • Forum Sponsor
  • Trade Count: (+11)
  • Explorer
  • *****
  • Join Date: Nov 2008
  • Posts: 19044
  • Location: Wetside
  • Groups: Wa Wild Sheep Life Member
Re: What is the problem w my .300 blackout w suppressor.?
« Reply #37 on: May 26, 2024, 05:52:36 PM »
Took the current gas block off and ordered an adjustable one off midway.  Had drill the old one out cause one set screw was so tight and stripped. 
“In common with”..... not so much!!

Offline Duckslayer89

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Oct 2014
  • Posts: 4127
  • Location: Cut Bank, Montana
Re: What is the problem w my .300 blackout w suppressor.?
« Reply #38 on: May 26, 2024, 06:49:06 PM »
Great, I should have mentioned the last time I shot it, I took the can off.  Maybe my next step should be an adjustable gas block?  And the next after that….throw it in the ocean!!

Throw it in the ocean and buy an AK. Problem solved.

 


* Advertisement

* Recent Topics

Had my first solid buck remounted, got it back by jrebel
[Today at 02:05:00 PM]


Blacktail by Dirty Mike
[Today at 02:00:29 PM]


So.....Are we having a Fall cougar season. by hunter399
[Today at 12:37:30 PM]


Got my 2023 archery Speed Goat back from Taxidermist by nwwanderer
[Today at 12:00:18 PM]


437 Sauk Bull Archery by Romulous
[Today at 10:31:58 AM]


Landowner Cow Tag Sought by Bigtine96
[Today at 09:53:26 AM]


WPG litter Bodhi x Cider ready end of summer by high_hunter
[Today at 09:31:08 AM]


Having my Dads Buck remounted ( UPDATE WITH PICS ) by HikerHunter
[Today at 09:30:42 AM]


Peyser taxidermy by Mtnwalker
[Today at 09:18:46 AM]


Puget Sound Opener did not disappoint! by CP
[Today at 09:18:44 AM]


WSTA Event 8/9-11 Traps for sale?? by JakeLand
[Today at 08:20:59 AM]


He's back!! by kodiak06
[Today at 07:47:49 AM]


Weyehaeuser Aberdeen by kodiak06
[Today at 07:43:48 AM]


Sad news, wamuledeer has passed. by h2ofowlr
[Today at 07:38:08 AM]


Grays Harbor Deer Hunting by Phipps14
[Today at 07:37:02 AM]


Area 11 Opener Next Week? by trophyhunt
[Today at 06:58:21 AM]


RIP Lou Dobbs by bearpaw
[Today at 05:22:43 AM]


Meet Kumpel by WapitiTalk1
[Yesterday at 10:59:44 PM]


Any local taxidermists? by BlackRiverTaxidermy
[Yesterday at 07:44:12 PM]


MA 10 by BLH69
[Yesterday at 06:41:46 PM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal