Homemade Bear Box

[Wayne1]

This is one a buddy of mine made it useing a heavy duty electrical junction box, cut a hole in the door and welded a lock on it for extra security , then used camo tape on it

[fishcrazy]

What do you figure it cost you to biuld that without the tape?

Kris

[Wayne1]

he got the box in a scrap pile at a local electrical contrator...  ended up paying $8.00 by the time it was finished

[scott63]

If you pre-drill some holes and run some screws through it might keep them from poking holes in your PIR, IR/Flash cover and lens. Depending on how aggressive they are you can also make some door mats with nails/screw and small pieces of 1/4 plywood..............Scott

[Wayne1]

If you pre-drill some holes and run some screws through it might keep them from poking holes in your PIR, IR/Flash cover and lens. Depending on how aggressive they are you can also make some door mats with nails/screw and small pieces of 1/4 plywood..............

LOL......  Sounds like you musta lived in Alaska at one time

[scott63]

No, but this lil guy punched a couple holes in two cams in the spring.....Then the spring rains filled them right up! Lost a board in one unit and a cam in the other. I also had a different bear poke his claw right in the lens of a stealth cam I 390, but I was able to fix that. Last week I was able to check my cams after a month, got some great closeup shots but no damage thanks to the screws........Scott

[bow4elk]

That bear is a stud!!  Great photo as well.

[h2ofowlr]

I like the customized trail camera.