collapse

Advertisement


Author Topic: Need help with .45acp bullet seating.  (Read 1251 times)

Offline MHWASH

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jun 2007
  • Posts: 1191
  • Location: Colfax
Need help with .45acp bullet seating.
« on: February 13, 2011, 06:48:06 PM »
I've loaded a bunch round nose and hps, and ball, but I'm having trouble with these SWCs. I think I may have to seat the bullet band below the case mouth, then roll crimp? Any ideas?

Offline saread

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jun 2010
  • Posts: 30
Re: Need help with .45acp bullet seating.
« Reply #1 on: February 13, 2011, 07:14:25 PM »
For LSWC you will need to leave the bullet shoulder about 1/16th inch outside of the case mouth.  You will also need to add a taper crimp to about 0.470 inch. When the round feeds, it rides up the ramp on the bullet shoulder, so you need to have some of it outside the case.  If the case isn't crimped, the case mouth can cause a misfeed as well.  The SWC bullet will give you an inherently shorter OAL than ball will so you don't have to worry about it as much. 

Offline luv2shoot

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Apr 2010
  • Posts: 22
Re: Need help with .45acp bullet seating.
« Reply #2 on: February 16, 2011, 08:29:28 PM »
A good rule of thumb is to have about a thumb nails thickness of bullet out of the case. Then enough taper crimp to remove the bell from the expanding die.

Offline MHWASH

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jun 2007
  • Posts: 1191
  • Location: Colfax
Re: Need help with .45acp bullet seating.
« Reply #3 on: February 16, 2011, 08:49:18 PM »
I've messed with the length a fair amount, but still cant seem to get these to chamber all the way. I do have another brand, with a slight different shape that seems to be chambering just fine. Hopefully I'll get a chance to load a few before the weekend.

Offline JackOfAllTrades

  • Rasbo said I Ain't Right.
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2009
  • Posts: 6509
  • Location: Lynden, WA.
  • Μολὼν λαβέ
Re: Need help with .45acp bullet seating.
« Reply #4 on: February 16, 2011, 11:05:38 PM »
What brand/model of bullet? H&G 68, Lyman, Lee, Zero, Barry's?

Here's what a loaded Lyman 452460 200gn SWC should look like. Taper crimp, .470" at the mouth. If it won't chamber, then see if the bullet is hitting the end of the chamber. Remember, the 45acp head spaces on the case mouth. Too much crimp and it won't properly. Not enough, and it might not go in. Build yourself some dummy rounds until you get what works. Get with a buddy that's reloaded 45acp successfuly to show you.

-Steve
The NRA says I'm a Master!
Colt's, Ruger's, Dan Wesson, & Kimber are my friends!
Proud to be a U.S. Navy Veteran.

If you never follow your dreams, you'll never go anywhere.

Critical thinking keeps people from freaking the hell out every time some half baked blogger forgets his meds. Unlike some of you, I do not have TawkethOutOfAnus© syndrome.

 


* Advertisement

* Recent Topics

Looking for Solid 22 LR input by Rat44
[Today at 12:26:36 AM]


Lynx kittens confirmed in the Kettle Range by dwils233
[Today at 12:04:14 AM]


Archery elk gear, 2025. by spin05
[Today at 12:03:42 AM]


How To Get Your $0.00 Tax Stamp - Black Hammer Arms by dreadi
[Yesterday at 11:33:25 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Rainier10
[Yesterday at 10:19:01 PM]


Seeking recommendations on a new scope by Klickitatsteelie
[Yesterday at 09:23:56 PM]


2025 Canning by Twispriver
[Yesterday at 09:15:12 PM]


2025 Montana alternate list by Edminsterquality
[Yesterday at 08:47:06 PM]


WSTA 2025 Summer Rendezvous Agenda by Trapper John
[Yesterday at 08:00:27 PM]


First attempt at polish sausages by Stein
[Yesterday at 07:58:22 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by MADMAX
[Yesterday at 07:57:22 PM]


Sockeye Numbers by Southpole
[Yesterday at 07:44:30 PM]


Best all around muzzy (updated) by jjhunter
[Yesterday at 07:44:26 PM]


38% increase in fishing and hunting licenses by Sitka_Blacktail
[Yesterday at 07:02:41 PM]


50 inch SXS and Tracks? by 92xj
[Yesterday at 05:34:03 PM]


3 days for Kings by MADMAX
[Yesterday at 05:06:49 PM]


Full moon and last week of September by pd
[Yesterday at 04:51:23 PM]


Hunting bears in the thick stuff by ghosthunter
[Yesterday at 04:33:46 PM]


GMU 247 Entiat bear hunting by Ridgerunner
[Yesterday at 11:56:01 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal