collapse

Advertisement


Author Topic: traditional draw length?  (Read 1061 times)

Offline thegamejr

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2012
  • Posts: 100
  • Location: port orchard,wa
  • GET 'EM
traditional draw length?
« on: February 21, 2013, 05:39:02 PM »
how much of a difference is there from a compound draw length with release? :dunno:

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: traditional draw length?
« Reply #1 on: February 21, 2013, 06:22:04 PM »
Well, your true draw length should not change. Other than the compression of the arms and shoulder is greater when shooting traditional due to the increased poundage at anchor. 

However, short a2a bows and the ever growing demand for speed encourages many archers to shoot draw lengths a bit longer than their true draw length.  In traditional bows the bow must conform to the archers personal draw length and anchor point.  With compound bows the archer must conform to the bow regardless of draw length.  So even though the physical dimensions of the archer do not change the body can be manipulated to lengthen or shorten a draw length to fit the compound whereas the traditional bow must be manipulated to fit the archer.

It is a common problem amongst modern archers to place the release aid too far out on the finger tip.  Other than closed body position and bow grip pressure this is probably the issue I see most when first teaching the art of proper form.  When the release is properly placed near the middle knuckle of the finger the string position should find the same vertical anchor as you would have shooting fingers.  There are minor differences due to different hook to trigger lengths, but those are minimal at best.

Far too many traditional archers short draw their bows.  Usually a result of being unable to comfortably anchor the full draw weight.  Other reasons tend to be the cockamamie over bent, attack the target, out of balance traditional form many traditionalist's practice and thus give advise on.  Does not matter what weapon you chose to shoot your body should never be out of balance and your spine should be in line with the space between your feet.

So, when proper form is addressed and proper fitting of a bow is employed all draw lengths should be the same regardless of traditional, compound, fingers or release.  Only variance should be the amount of loose jointed compression your body exhibits to the amount of draw weight being placed on the body.  Never more than 1/2 inch.
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline thegamejr

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2012
  • Posts: 100
  • Location: port orchard,wa
  • GET 'EM
Re: traditional draw length?
« Reply #2 on: February 21, 2013, 08:04:49 PM »
thanks that covers everything i was curious about

 


* Advertisement

* Recent Topics

Norway pass Elk by Dark2Dark
[Yesterday at 11:51:46 PM]


Bear behavior by lewy
[Yesterday at 11:51:23 PM]


FFL preferences or warnings in Olympia or south Sound area? by Platensek-po
[Yesterday at 11:39:03 PM]


Boat registration by Happy Gilmore
[Yesterday at 10:22:29 PM]


Norway Pass Archery Elk 2025 by Boss .300 winmag
[Yesterday at 09:14:45 PM]


Entiat Quality tag by WAcoueshunter
[Yesterday at 09:05:06 PM]


Idaho 2025 Controlled Hunts by JDArms1240
[Yesterday at 09:03:40 PM]


Palouse/Mica (GMU 127) Access for Trades Work by dr.derek
[Yesterday at 08:29:53 PM]


Pearygin Quality by MADMAX
[Yesterday at 07:55:09 PM]


Teanaway bull elk by Caveman123
[Yesterday at 07:43:44 PM]


Oregon results posted. by Caveman123
[Yesterday at 07:40:47 PM]


2025 Draw Results by Yeti419
[Yesterday at 07:27:32 PM]


Mudflow Archery by Yeti419
[Yesterday at 07:26:25 PM]


Cowiche Quality Buck by dilleytech
[Yesterday at 07:14:35 PM]


Rehome for GWP by Feathernfurr
[Yesterday at 06:43:07 PM]


Vashon Island deer tag by bowhunter_1
[Yesterday at 04:32:43 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal