collapse

Advertisement


Author Topic: traditional draw length?  (Read 1066 times)

Offline thegamejr

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2012
  • Posts: 100
  • Location: port orchard,wa
  • GET 'EM
traditional draw length?
« on: February 21, 2013, 05:39:02 PM »
how much of a difference is there from a compound draw length with release? :dunno:

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: traditional draw length?
« Reply #1 on: February 21, 2013, 06:22:04 PM »
Well, your true draw length should not change. Other than the compression of the arms and shoulder is greater when shooting traditional due to the increased poundage at anchor. 

However, short a2a bows and the ever growing demand for speed encourages many archers to shoot draw lengths a bit longer than their true draw length.  In traditional bows the bow must conform to the archers personal draw length and anchor point.  With compound bows the archer must conform to the bow regardless of draw length.  So even though the physical dimensions of the archer do not change the body can be manipulated to lengthen or shorten a draw length to fit the compound whereas the traditional bow must be manipulated to fit the archer.

It is a common problem amongst modern archers to place the release aid too far out on the finger tip.  Other than closed body position and bow grip pressure this is probably the issue I see most when first teaching the art of proper form.  When the release is properly placed near the middle knuckle of the finger the string position should find the same vertical anchor as you would have shooting fingers.  There are minor differences due to different hook to trigger lengths, but those are minimal at best.

Far too many traditional archers short draw their bows.  Usually a result of being unable to comfortably anchor the full draw weight.  Other reasons tend to be the cockamamie over bent, attack the target, out of balance traditional form many traditionalist's practice and thus give advise on.  Does not matter what weapon you chose to shoot your body should never be out of balance and your spine should be in line with the space between your feet.

So, when proper form is addressed and proper fitting of a bow is employed all draw lengths should be the same regardless of traditional, compound, fingers or release.  Only variance should be the amount of loose jointed compression your body exhibits to the amount of draw weight being placed on the body.  Never more than 1/2 inch.
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline thegamejr

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2012
  • Posts: 100
  • Location: port orchard,wa
  • GET 'EM
Re: traditional draw length?
« Reply #2 on: February 21, 2013, 08:04:49 PM »
thanks that covers everything i was curious about

 


* Advertisement

* Recent Topics

DR Brush Mower won't crank by Boss .300 winmag
[Today at 05:03:05 PM]


Goose hunting with vice grips by Pegasus
[Today at 04:51:23 PM]


Colockum Archery Bull Tag by geauxtigers
[Today at 04:40:38 PM]


Drew Cleman Mountain Any Ram! by Ridgerunner
[Today at 04:15:12 PM]


Public Land Sale Senate Budget Reconciliation by GeoSwan
[Today at 04:12:47 PM]


Selkirk bull moose. by Turner89
[Today at 03:31:18 PM]


After a couple years of poor health,... by pianoman9701
[Today at 01:07:04 PM]


Back up camera by Blacklab
[Today at 11:54:30 AM]


Drew Quality by hunter399
[Today at 11:12:45 AM]


Youth Cow Tag by Sundance
[Today at 10:55:51 AM]


Idaho 2025 Controlled Hunts by huntinluva
[Today at 10:01:53 AM]


Cowiche Quality Buck by buglebuster
[Today at 05:58:49 AM]


People on Cams by hunter399
[Today at 05:56:38 AM]


Norway pass Elk by furbearer365
[Today at 05:46:12 AM]


Norway Pass Bull by High Climber
[Yesterday at 09:23:10 PM]


Greenriver quality Elk permit by IDWAHunt
[Yesterday at 07:54:08 PM]


Steel Targets??? by bowman
[Yesterday at 07:41:07 PM]


Is FS70 open? by CarbonHunter
[Yesterday at 06:08:08 PM]


Fun little Winchester 1890 project by Dan-o
[Yesterday at 04:24:08 PM]


Idaho unit 76 cow elk Oct 25 to Nov 15 by bornhunter
[Yesterday at 02:11:35 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal