collapse

Advertisement


Author Topic: Glock "Perfection" ??  (Read 1542 times)

Offline Bean Counter

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jul 2008
  • Posts: 13624
Glock "Perfection" ??
« on: April 22, 2013, 03:07:37 PM »
So I took one of my .40S&W magazines that holds 22 rounds out to the woods to pop some caps. I noticed that several times I had a failure of the magazine spring to push the next round up. The magazine is brand new so I don't know if the spring needs to be broken in or maybe there were chemicals or junk inside that binds the follower. Yes, genuine Glock magazines, not knock off Korean or aftermarket stuff.

  Anyone else have this problem?

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Glock "Perfection" ??
« Reply #1 on: April 22, 2013, 04:36:41 PM »
I have never had a problem with any Glock or Glock magazine, I own a bunch. Have own a bunch  and can't even begin to attempt to count the thousands upon thousands of rounds I have shot through them in 20 plus years. Obviously the magazine would be held suspect first.

Offline Jim the Plumber

  • Local Legend
  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Feb 2009
  • Posts: 469
  • Hunting trespassers from the air
    • http://precisiontactical.co/
Re: Glock "Perfection" ??
« Reply #2 on: April 23, 2013, 12:23:30 PM »
What ammo are you using? It could be the rounds are too long and hanging up on the inside of the mag. Another thing to look for is a molding 'burr' causing drag.

Offline JLS

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Nov 2010
  • Posts: 4623
  • Location: In my last tracks.....
  • Groups: Support the LWCF!
Re: Glock "Perfection" ??
« Reply #3 on: April 23, 2013, 12:28:26 PM »
Take it apart, look for burrs like Jim said.  Wipe it all down with a clean rag and make sure the spring is not in backwards.

Matthew 7:13-14

Offline mountainman

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 6018
  • Location: Wenatchee, Wa
Re: Glock "Perfection" ??
« Reply #4 on: April 23, 2013, 12:40:07 PM »
What ammo are you using? It could be the rounds are too long and hanging up on the inside of the mag. Another thing to look for is a molding 'burr' causing drag.
:yeah:
That Sword is more important than the Shield!

Offline Bean Counter

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jul 2008
  • Posts: 13624
Re: Glock "Perfection" ??
« Reply #5 on: April 23, 2013, 01:00:17 PM »
I only shoot factory loads, especially when its .40S&W. These were Federal jacketed hollow points.

Offline Bean Counter

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jul 2008
  • Posts: 13624
Re: Glock "Perfection" ??
« Reply #6 on: April 23, 2013, 01:16:33 PM »
 :bash: what the hell is the secret with getting the floor plate off? I can do it in a snap on an AR mag or on my H&K. What's so hard about getting the Glock mag apart?

Offline JLS

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Nov 2010
  • Posts: 4623
  • Location: In my last tracks.....
  • Groups: Support the LWCF!
Re: Glock "Perfection" ??
« Reply #7 on: April 23, 2013, 01:27:23 PM »
Well, if you don't have a Glock tool, take a finishing nail and put the flat end against the round detent.  Use something to cover the nail point, and push it in, then slide the floorplate forward.
Matthew 7:13-14

 


* Advertisement

* Recent Topics

Idaho's new Deer/Elk License System by Bo_nimrod
[Yesterday at 11:06:12 PM]


Bearpaw Outfitters Annual July 4th Hunt Sale by bearpaw
[Yesterday at 09:52:46 PM]


Antelope next year? by jstone
[Yesterday at 07:39:59 PM]


Pinks! by Stein
[Yesterday at 06:33:42 PM]


Sportsman Alliance files petition to Gov Ferguson for removal of corrupt WA Wildlife Commissioners by ghosthunter
[Yesterday at 06:29:43 PM]


Anybody breeding meat rabbit? by jackelope
[Yesterday at 06:09:07 PM]


2025 OILS! by Whitenuckles
[Yesterday at 05:16:45 PM]


2024 Quality Buck coming home by Whitenuckles
[Yesterday at 05:10:28 PM]


Alaska 2025 by Whitenuckles
[Yesterday at 05:09:18 PM]


Do folks run their refrigerators on Propane while towing their RV's? by huntandjeep
[Yesterday at 04:11:54 PM]


Tooth age on Quinault bull by nwwanderer
[Yesterday at 04:02:04 PM]


Skunks by Humptulips
[Yesterday at 02:21:06 PM]


Ross Lake boat launch? by cjjcb
[Yesterday at 02:06:21 PM]


Cougar Problems Toroda Creek Road Near Bodie by Sakko300wsm
[Yesterday at 01:50:02 PM]


Muzzleloader scope options by huntnphool
[Yesterday at 01:25:33 PM]


MOVED: Purebred Chesapeake Puppy by Woodchuck
[Yesterday at 01:18:02 PM]


2025 Montana alternate list by bear
[Yesterday at 05:38:00 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal