collapse

Advertisement


Author Topic: DIY Tanning...how hard could it be?  (Read 4245 times)

Offline Coastal_native

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2010
  • Posts: 1254
  • Location: The Beach
  • Serving up Colockumelk since 2010
DIY Tanning...how hard could it be?
« on: December 04, 2013, 08:15:19 PM »
I'm willing to admit that tanning and preparing a cape for mounting is both an art and a science, but I'm not willing to admit that it is an insurmountable task for a beginner with determination, attention to detail, and gobs of time.  The only part that seems intimidating to me is thinning/shaving the hide without a fleshing wheel.  I understand this is an important step to having a quality mount in the end.  Has anyone attempted it?  What were your successes and failures? Is it as painful of a process as everyone says?  If not thinned enough, will it have a noticeable effect on the final product for someone looking for a hobbyist-quality mount?

Convince me to give it a try...or convince me to take it to a commercial tannery.
"Do it in the woods"

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: DIY Tanning...how hard could it be?
« Reply #1 on: December 04, 2013, 08:17:37 PM »
Take it to a Tannery.  I'm not going to try and convince you.  I have 12 years of knowing what I am talking about.  And the "Been there, Done that" T-shirt.

Offline sebek556

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2011
  • Posts: 2603
  • Location: ne,wa
Re: DIY Tanning...how hard could it be?
« Reply #2 on: December 04, 2013, 08:21:46 PM »
I learned to do traditional brain tanning over the summer, but you end up with more of a suede than a hide. If you want hide, I would take it to a tanner. Unless its just another yote then go for it, if you mess it up just go call up another one.  :chuckle: :chuckle:

Offline Coastal_native

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2010
  • Posts: 1254
  • Location: The Beach
  • Serving up Colockumelk since 2010
Re: DIY Tanning...how hard could it be?
« Reply #3 on: December 04, 2013, 08:29:54 PM »
Take it to a Tannery.  I'm not going to try and convince you.  I have 12 years of knowing what I am talking about.  And the "Been there, Done that" T-shirt.

 :chuckle: that's pretty convincing...I take it the t-shirt is not as cool as it sounds?
"Do it in the woods"

Offline Weehunt66

  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: Sep 2010
  • Posts: 123
  • Location: Cowiche
  • Groups: RMEF, NRA
Re: DIY Tanning...how hard could it be?
« Reply #4 on: December 04, 2013, 08:32:53 PM »
If you have the time and the cape/hide.... Then I would go for it. I did some home tanning last year and I have a new appreciation for Taxidermists.  The more you do the better you will get at it.  :)

Offline Coastal_native

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2010
  • Posts: 1254
  • Location: The Beach
  • Serving up Colockumelk since 2010
Re: DIY Tanning...how hard could it be?
« Reply #5 on: December 04, 2013, 08:45:27 PM »
If you have the time and the cape/hide.... Then I would go for it. I did some home tanning last year and I have a new appreciation for Taxidermists.  The more you do the better you will get at it.  :)

Were u tanning capes for mounting?  If so, What kind of tools did u have for fleshing and shaving?
"Do it in the woods"

Offline DeerThug

  • Political & Covid-19 Topics
  • Trade Count: (+4)
  • Longhunter
  • *****
  • Join Date: Jun 2010
  • Posts: 884
  • Location: Yakima
Re: DIY Tanning...how hard could it be?
« Reply #6 on: December 04, 2013, 08:46:58 PM »
I have tried it and ended up with a pile of hair and a slimy stinky skin - followed the instructions to a t and still ended up with a mess... get it wet tanned and then do your own mount from there - did that route and it was a success..
Shoot straight Shoot often

Offline Ricochet

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jan 2009
  • Posts: 889
  • Location: Oregon
Re: DIY Tanning...how hard could it be?
« Reply #7 on: December 04, 2013, 08:49:08 PM »
Tried to home tan an elk hide once.  I've bought plywood that wasn't as stiff as that hide turned out.  You can get away with home tanning some of the thinner hides, but its still not worth it unless you don't value your time. You also must accept the fact that failure is a definite possibility.  Commercial tanning isn't that expensive, I wouldn't recommend home tanning unless you're REALLY bored and don't give a rip if the hide gets ruined.   :twocents:
It is not my duty to validate your delusions.

"It is no measure of health to be well adjusted to a profoundly sick society."-Jiddu Krishnamurti.

Offline Elkstuffer

  • ALL THAT'S WILD TAXIDERMY
  • Business Sponsor
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jul 2007
  • Posts: 1492
  • Location: Tieton, WA
    • Facebook.com/allthatswildtaxidermy
    • All That's Wild Taxidermy
  • Groups: WWSF, NWTF, RMEF, DU, SCI, MDF
Re: DIY Tanning...how hard could it be?
« Reply #8 on: December 05, 2013, 03:52:28 PM »
Take it to a Tannery.  I'm not going to try and convince you.  I have 12 years of knowing what I am talking about.  And the "Been there, Done that" T-shirt.

I have the same shirt and it doesn't fit. And thats after 14 yrs. :chuckle:

For $35 in tanning fees why would anyone waist HOURS of there time messing with it. Like Deerthug said "get it wet tanned and mount it yourself". The end result will be a lot better.
Serving Central Washington and the Northwest for all of your taxidermy needs since 1999.

ALL THAT'S WILD TAXIDERMY
960 Dilley Road
Tieton, WA 98947
(509)673-1579

"If you are not working to protect hunting, then you are working to destroy it."     Fred Bear

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: DIY Tanning...how hard could it be?
« Reply #9 on: December 05, 2013, 08:51:35 PM »
Take it to a Tannery.  I'm not going to try and convince you.  I have 12 years of knowing what I am talking about.  And the "Been there, Done that" T-shirt.

 :chuckle: that's pretty convincing...I take it the t-shirt is not as cool as it sounds?

I've got it packed a box somewhere.  If I find it do you want it?  I don't need it anymore.

Offline bigdave

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Oct 2008
  • Posts: 1000
  • Location: Spokane
Re: DIY Tanning...how hard could it be?
« Reply #10 on: December 06, 2013, 12:08:17 PM »
I tried this once.......I got Anthrax.....and my fingers swelled up like summer sausages. It took four doctors to figure out what it was and what to treat it with. That is a job I'll gladly let someone else do from know on.

Offline sebek556

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2011
  • Posts: 2603
  • Location: ne,wa
Re: DIY Tanning...how hard could it be?
« Reply #11 on: December 06, 2013, 12:12:17 PM »
What were you using to get anthrax from tanning? What were you tanning? That's crazy.

Offline bigdave

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Oct 2008
  • Posts: 1000
  • Location: Spokane
Re: DIY Tanning...how hard could it be?
« Reply #12 on: December 06, 2013, 01:02:23 PM »
It was a deer hide........the doc that finally diagnosed it said that anthrax natural occurs in nature; it's spores are in the dirt.  Animals pick them up and carry them in their hair. When I was working with the hide, I wore rubber gloves but they ripped and I just kept working on it anyway.  My hand got scratched from the dehairing tool I was using and the anthrax spores entered my hand through the wound. It took a infectious disease doc who had to go get this big book from his library to finally diagnose it AND get the right antibiotic to treat it. It took a very expensive special drug to get the job done. I didn't know you could get anything but inhaled anthrax infections, but you can.


From the interweb:

Anthrax is an infection caused by the bacterium Bacillus Anthracis. Bacillus Anthracis exists in animals that eat grass, such as cows and sheep. It is most commonly found in the farming areas of Asia, South America, Africa, the Caribbean and southern and eastern Europe.
(and Athol, ID.  :chuckle:)

Bacillus Anthracis makes spores. These spores can lay dormant in the soil for a long time. When the environment is right, they germinate and cause infection - anthrax.

Typically, Bacillus Anthracis spores germinate and cause infection in the:

Skin (Cutaneous anthrax) - accounts for 95% of all anthrax infections. People at risk may work in abbatoirs (slaughterhouses), tanning workshops, and places preparing wool, hides or leather. Workers can become infected if there is a cut on their skin.

A 1 to 3 centimeter-wide ulcer develops on the skin. The ulcer becomes black within a week. If left untreated there is a serious risk of blood poisoning and death.

Offline ICEMAN

  • Site Sponsor
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: May 2007
  • Posts: 15575
  • Location: Olympia
  • The opinionated one... Y.A.R. Exec. Staff
Re: DIY Tanning...how hard could it be?
« Reply #13 on: December 06, 2013, 01:23:34 PM »
Holy moly bigdave, you should start a separate thread about that, sure to get more coverage than lost in this thread. Scary story.
molṑn labé

A Knuckle Draggin Neanderthal Meat Head

Kill your television....do it now.....

Don't make me hurt you.

“I don't feel we did wrong in taking this great country away from them. There were great numbers of people who needed new land, and the Indians were selfishly trying to keep it for themselves.”  John Wayne

Offline sebek556

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2011
  • Posts: 2603
  • Location: ne,wa
Re: DIY Tanning...how hard could it be?
« Reply #14 on: December 06, 2013, 08:25:19 PM »
 :yeah: wow never knew.. I have 3 deer hides that I am getting ready to brain tan... thinking about getting some good gloves now

 


* Advertisement

* Recent Topics

New York deer by Bearhunter308
[Today at 10:14:19 PM]


Anybody breeding meat rabbit? by jackelope
[Today at 10:02:50 PM]


DIY Ucluelet trip by metlhead
[Today at 09:40:00 PM]


Survey in ? by metlhead
[Today at 09:35:57 PM]


Alaska Fishing Guide and Lodge Recommendations by Tbar
[Today at 09:31:49 PM]


Colorado Results by cem3434
[Today at 08:35:51 PM]


NEED ADVICE: LATE after JUNE 15th IDAHO BEAR by Sliverslinger
[Today at 08:31:23 PM]


Resetting dash warning lights by Sandberm
[Today at 08:13:27 PM]


Please Report Problems & Bugs Here by Mossy
[Today at 06:17:02 PM]


What's flatbed pickup life like? by Special T
[Today at 05:52:28 PM]


Oregon spring bear by Fidelk
[Today at 04:58:27 PM]


Idaho General Season Going to Draw for Nonresidents by idahohuntr
[Today at 01:51:40 PM]


Seekins PH2 & Element sale by BigJs Outdoor Store
[Today at 12:40:26 PM]


Kokanee Fishing Tournament!! 🎣 June 13-14, Joseph OR by WRKG4GD
[Today at 11:42:02 AM]


wings wings and more wings! by birddogdad
[Today at 11:00:11 AM]


Jim Horn's elk calling, instructional audio CD's. by WapitiTalk1
[Today at 09:46:03 AM]


Wyoming elk who's in? by link
[Today at 07:00:33 AM]


CVA Optima V2 durasight rail mod by craigapphunt
[Today at 05:56:00 AM]


Last year putting in… by wa.hunter
[Yesterday at 11:02:00 PM]


HUNTNNW 2025 trail cam thread and photos by huntnnw
[Yesterday at 10:34:36 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal