collapse

Advertisement


Author Topic: Barrel help!!!!  (Read 9138 times)

Offline elkslayer069

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2010
  • Posts: 800
  • Location: Wet side
Barrel help!!!!
« on: February 19, 2015, 05:23:02 PM »
I'm trying to put together a 7mm stw 30" flutted barrel 1-9 twist something like a light Palma or sendero contour on a model 70. So here's my problem I can't seem to find a maker that could ship me a barrel in the next 4-6 months that is to my specs. I could have the length and twist that I want delivered to me next week but it won't be contoured or flutted is there somewhere a guy could have to contour and fluting done on the west side or even down in Oregon.

Thank any help appreciated.
You gonna draw those pistols or whistle Dixie?

Offline AWS

  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2007
  • Posts: 1838
Re: Barrel help!!!!
« Reply #1 on: February 19, 2015, 05:34:28 PM »
The same guy that is going to fit and chamber your barrel should be able to do the contour and fluting.
After the first shot the rest are just noise.

Make mine a Minaska

Offline 257 Wby Mag

  • Non-Hunting Topics
  • Trade Count: (-1)
  • Sourdough
  • *****
  • Join Date: Sep 2007
  • Posts: 1975
  • Location: Chehalis
Re: Barrel help!!!!
« Reply #2 on: February 19, 2015, 05:40:51 PM »
Try broughton  barrels, last 2 I've ordered were 3 months iirc. Tim does straight and spiral fluting.
Tod Riechert fan club.

Offline HntnFsh

  • Washington For Wildlife
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Jul 2007
  • Posts: 6249
  • Location: Toledo
Re: Barrel help!!!!
« Reply #3 on: February 19, 2015, 05:41:33 PM »
Caleb, Try Firemaster up in Cinebar. Hes on the way to Ike Kinswa. But at the wye where you drop down towards the lake go straight like your going to Bear canyon hiway. Hes just a ways past the wye on the left. I heard that a guy I work with is doing some machinist work out there now. Hes a dang good machinist too! Its worth a try.

Offline jay.sharkbait

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Old Salt
  • ******
  • Join Date: Jun 2013
  • Posts: 6507
Re: Barrel help!!!!
« Reply #4 on: February 19, 2015, 05:48:59 PM »
Kampfeld custom


Offline Brad Harshman

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2013
  • Posts: 588
  • Location: central WA
Re: Barrel help!!!!
« Reply #5 on: February 19, 2015, 06:05:22 PM »
Pac-Nor?

Offline mountainman

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 6014
  • Location: Wenatchee, Wa
Re: Barrel help!!!!
« Reply #6 on: February 19, 2015, 07:39:40 PM »
Try broughton  barrels, last 2 I've ordered were 3 months iirc. Tim does straight and spiral fluting.
:yeah: :tup:
That Sword is more important than the Shield!

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Barrel help!!!!
« Reply #7 on: February 19, 2015, 10:16:21 PM »
Kampfeld does some amazing metal work, about as close to perfection as a smith can get. He can work a Remington 700 action like no other I have used.

One of my Rem 700's worked over by Kampfeld.












Offline 257 Wby Mag

  • Non-Hunting Topics
  • Trade Count: (-1)
  • Sourdough
  • *****
  • Join Date: Sep 2007
  • Posts: 1975
  • Location: Chehalis
Re: Barrel help!!!!
« Reply #8 on: February 20, 2015, 09:02:20 AM »
Call broughton,give him your specs, you'll have it in under 3 months find a smith fit and chamber... Or run up to Arlington and drop it off at benchmark... pretty easy, just gotta Dec I decided what route Ya wanna go
Tod Riechert fan club.

Offline rbros

  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Mar 2010
  • Posts: 433
  • Location: Olympia, Wa
Re: Barrel help!!!!
« Reply #9 on: February 20, 2015, 01:29:50 PM »
Kampfeld does great work, but do yourself a favor and have the barrel manufacturer flute the barrel.  This way you are guaranteed there won't be any issues with bore dimension or induced stress.  If you want an unfluted barrel, I think I have a med palma that will finish out at 29". 
R Bros Rifles
www.rbrosrifles.com

Offline mountainman

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 6014
  • Location: Wenatchee, Wa
Re: Barrel help!!!!
« Reply #10 on: February 20, 2015, 02:04:42 PM »
Kampfeld does great work, but do yourself a favor and have the barrel manufacturer flute the barrel.  This way you are guaranteed there won't be any issues with bore dimension or induced stress.  If you want an unfluted barrel, I think I have a med palma that will finish out at 29". 
:yeah:
That Sword is more important than the Shield!

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Barrel help!!!!
« Reply #11 on: February 20, 2015, 02:39:23 PM »
Kampfeld will flute it. I and others I know have had premium barrels fluted after the fact. Even after shooting the rifle for several years before having them fluted and accuracy has never changed and we have never had any issues with having someone else flute a barrel.

You might want to check here for premium barrels on hand see if you can find one you like fluted or have it fluted after the fact.

This is where I purchase my barrels without having the wait. They get barrels in regularly, so keep checking back or give them a call. Hard to beat the prices also for on hand barrels.

 
http://bugholes.com/index.php?route=product/category&path=88_89

Offline elkslayer069

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2010
  • Posts: 800
  • Location: Wet side
Re: Barrel help!!!!
« Reply #12 on: February 20, 2015, 06:24:45 PM »
Thanks for all the help guys Im change gears slightly and I'm gonna go the 6.5 stw route. I already ordered the barrel and dies and tomorrow I'm headed to the gunshow to look for stw brass to neck down.  :tup:
You gonna draw those pistols or whistle Dixie?

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Barrel help!!!!
« Reply #13 on: February 20, 2015, 06:52:33 PM »
Thanks for all the help guys Im change gears slightly and I'm gonna go the 6.5 stw route. I already ordered the barrel and dies and tomorrow I'm headed to the gunshow to look for stw brass to neck down.  :tup:

Cool wildcat! Take a look at some of the heavy Matrix VLD bullets.

Offline mountainman

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 6014
  • Location: Wenatchee, Wa
Re: Barrel help!!!!
« Reply #14 on: February 20, 2015, 06:54:51 PM »
Thanks for all the help guys Im change gears slightly and I'm gonna go the 6.5 stw route. I already ordered the barrel and dies and tomorrow I'm headed to the gunshow to look for stw brass to neck down.  :tup:
Cool, that's an awesome round. Simpson knew what he was doing when he designed that round! What barrel did you go with? You should have a flat shooter when done with slightly longer barrel life then the 26 Nosler or any of the Wildcats based on the ultra mag cases! :tup:
That Sword is more important than the Shield!

 


* Advertisement

* Recent Topics

1 week till bear killin time! by CasterlyRock
[Today at 12:03:40 AM]


Tease 'l' by Ricochet
[Yesterday at 08:51:31 PM]


Stealth Cam QV20 by Kingofthemountain83
[Yesterday at 07:42:11 PM]


Taxidermy Issues....HELP! by Magnum_Willys
[Yesterday at 04:38:49 PM]


More Kings! by highside74
[Yesterday at 03:37:22 PM]


2025 Canning by 3boys
[Yesterday at 02:51:04 PM]


Bino Bandit by O. Nerka
[Yesterday at 02:30:42 PM]


Waterfowl Taxidermist by kodiak 907
[Yesterday at 11:37:57 AM]


Gots me a new/old rockchuck rifle coming by JDHasty
[Yesterday at 11:25:33 AM]


FirstLite at Big J's by BigJs Outdoor Store
[Yesterday at 11:16:24 AM]


Mt. St. Helens Goat by hunterednate
[Yesterday at 09:58:52 AM]


Are you using a Diesel Fuel Additive and if so which one? by JBar
[Yesterday at 09:09:51 AM]


AUCTION: Custom knife by Alden Cole by Dan-o
[Yesterday at 08:43:32 AM]


newbie bear field dressing and hide by ghosthunter
[Yesterday at 08:03:45 AM]


Grouse in Vail? by hunter399
[Yesterday at 07:28:12 AM]


2 Dozen CRD's for sale by Badhabit
[July 24, 2025, 09:52:44 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal