collapse

Advertisement


Author Topic: 338 Edge at 2368 yards  (Read 3304 times)

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3306
  • Location: Yelm
  • Preferred pronouns: were/was
338 Edge at 2368 yards
« on: May 25, 2015, 09:33:13 AM »
Did some shooting yesterday and finally found a spot out of the clouds to stretch out a bit. The best we could do up top was 563 yards, came down a little lower and found this spot.

The target is the white rock at 2.5 MIL up and .5 Mil right of center. The rock is about 1 MOA by 1.75MOA, so I'd call it about 25"x45". It's not a super small target but that's the best we could spot over there. The impact is right under the rock just right of center.



Here's a youtube link, but I can never get these to embed properly.

« Last Edit: May 25, 2015, 12:06:29 PM by yorketransport »

Offline DRobnsn

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1036
  • Location: wetside
Re: 338 Edge at 2368 yards
« Reply #1 on: May 25, 2015, 10:01:01 AM »
 :tup: Looks like a good time. We managed to get out yesterday for a few hours scouting for shooting spots. Found a good spot for 650 might get 800 if you worked it right, and one that may work for 1050.

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3306
  • Location: Yelm
  • Preferred pronouns: were/was
Re: 338 Edge at 2368 yards
« Reply #2 on: May 25, 2015, 10:19:31 AM »
The biggest problem I've found is that the good long range spots are all at higher elevation. At that point you're at the mercy of the weather. It's annoying to drive nearly 2 hours and get fogged out! :bash:

« Last Edit: May 25, 2015, 12:02:29 PM by yorketransport »

Offline TheHunt

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Sep 2007
  • Posts: 6238
  • Location: Western Washington
Re: 338 Edge at 2368 yards
« Reply #3 on: May 25, 2015, 01:32:30 PM »
Who built your rifle?

WHat are the components?
275 down 2

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3306
  • Location: Yelm
  • Preferred pronouns: were/was
Re: 338 Edge at 2368 yards
« Reply #4 on: May 25, 2015, 04:52:06 PM »
That particular rifle is a Jim Borden BRL switch barrel (270 RUM, 7mm RUM, and 338 Edge) with an NXS 5.5-22x56 scope mounted on a 40 MOA rail. The load is a 300gr Berger OTM and H1000  in Nosler brass moving at 2880 fps. It took 98.6 MOA of adjustment to make the hits. That meant maxing out the scope, then holding 5.5 MOA in the reticle. I actually made a deal to sell the rifle while shooting yesterday. There's no better sales tactic than making hits at over 2000 yards. :chuckle: Once the other guy comes up with the money he can have what's left of the barrel life after I'm done with it. :devil:

The 338 had the best luck making hits at the 2368 yard target. Also along for the ride was my 375 BME (a pile of parts slapped together as an unfinished project  ;)) and a couple of Striker pistols. The pistols didn't fare so well at that range. The 284 needed over 150 MOA to get that far. I tried dialing the 48 MOA in the scope, then holding 100 MOA high, but didn't have much luck; I don't get it! :dunno: :chuckle: The pistols are best kept under 1400 yards, but they hold their own out to that point.

Andrew

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3306
  • Location: Yelm
  • Preferred pronouns: were/was
Re: 338 Edge at 2368 yards
« Reply #5 on: May 25, 2015, 08:30:28 PM »
Here's another clip of my first 2 shots at the same spot.


Offline TheHunt

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Sep 2007
  • Posts: 6238
  • Location: Western Washington
Re: 338 Edge at 2368 yards
« Reply #6 on: May 26, 2015, 07:18:24 AM »
I am thinking of having a 338 edge built after my 7 mm is completed.
275 down 2

Offline Blacklab

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 8841
Re: 338 Edge at 2368 yards
« Reply #7 on: May 26, 2015, 08:07:29 AM »
Man that's a long poke! I'd be happy with a 1/3 of that distance maybe in my next life :chuckle: TMF! (to much fun)  ;)
Hey! I'm not a complete idiot I have parts missing. Though sometimes I wonder.

If you want to make God laugh tell him your plans.

Offline DRobnsn

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1036
  • Location: wetside
Re: 338 Edge at 2368 yards
« Reply #8 on: May 26, 2015, 09:53:08 AM »
The biggest problem I've found is that the good long range spots are all at higher elevation. At that point you're at the mercy of the weather. It's annoying to drive nearly 2 hours and get fogged out! :bash:

I have found that as well. One of our biggest problems is I can never seem to get our early enough, by the time I get to a spot to shoot its late afternoon and the wind is screaming! Part of that is because my shooting partner works nights so his schedule is a little funky on the weekends compared to mine.

 


* Advertisement

* Recent Topics

Bear den elevation by jason stevens
[Today at 05:31:19 PM]


Idaho deer 2026. Let’s go!! by Bigfoot28
[Today at 05:13:16 PM]


Laser sight/pointer by Kingofthemountain83
[Today at 04:26:58 PM]


Nice article on 170" Flintlock PA Whitetail by Pathfinder101
[Today at 03:55:42 PM]


a good one by Pathfinder101
[Today at 03:51:32 PM]


Turkey Vest Recommendations? by ghosthunter
[Today at 03:03:33 PM]


E Caller Vs Speaker and App by BeerBugler
[Today at 02:57:24 PM]


Calling Bears by Webfoot
[Today at 02:17:25 PM]


Fall bear season to be minimized by Jlittlebear31
[Today at 01:56:45 PM]


Very old eyes. by Alchase
[Today at 12:16:15 PM]


School me on cast iron! by EnglishSetter
[Today at 11:57:40 AM]


Meat processing luxury, 1 item by andersonjk4
[Today at 10:22:18 AM]


Idaho Non-Res draw results by bearhunter99
[Today at 09:48:32 AM]


Archery Shop by Dreaded Archer24
[Today at 07:28:07 AM]


Pacific Northwest - The Beautiful Cookbook by CaNINE
[Today at 04:32:19 AM]


WSTA Winter rendezvous/ Fur sale/Banquet Dinner by Humptulips
[Today at 12:07:26 AM]


Idaho's new Deer/Elk License System by Westsideelkchaser
[Yesterday at 10:36:29 PM]


Returned Idaho tags by WapitiTalk1
[Yesterday at 10:15:45 PM]


Arizona credit card hits by cem3434
[Yesterday at 09:23:58 PM]


Washington Euro mounting Plaque*free give away for youth hunter* by Dan-o
[Yesterday at 08:35:44 PM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal