I had a few old leaky duck floaters that I have been meaning to throw out. That is until I looked at the cost of adding to my Avian-X field decoy collection. For the price of a wood stick, a finishing nail and literally less than 5 minutes of labor, I’ve converted the leaker to a usable field decoy.
Here’s how:
1. Cut the keel off the leaker – I used a sawzall but a hand saw will work.
2. Find the balance point by pushing the decoy slowly over the edge of the workbench; when it starts to tip mark that point with a sharpie.
3. Drill a big hole in the bottom with a hole saw
4. Drill a small hole in the top slightly bigger than a finishing nail head.
5. Cut the stick to the right length – sharpen one end and drive the nail into the other end
Done –
I’ll let you know how they work in Oct.