collapse

Advertisement


Author Topic: 7-300  (Read 6044 times)

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5602
Re: 7-300
« Reply #15 on: May 19, 2017, 10:37:57 AM »
The carbon barrel is not typically to save weight over a sporter barrel its to save weight over a comparable long range varmit / bull barrel that would be pounds heavier. 

But if you start putting 40 oz scopes on em its really hard to keep the weight down. I've got to go with Leupold to stay under 10#.

 

Offline fillthefreezer

  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Aug 2011
  • Posts: 1486
  • Location: tacoma
  • @adventure_sd
Re: 7-300
« Reply #16 on: May 19, 2017, 04:13:34 PM »
no, custom build. ti action, carbon barrel, hi comb stock, etc. has to upstage my duct tape special somehow  :chuckle:

There was a build that recently finished up on another forum in 30 Nosler that used a similar parts list, Ti action, CF wrapped barrel, CF stock, Ti muzzle brake and once it was scoped up, it still weighed nearly 10lbs.  Other than a very high cool factor, it seemed like a VERY expensive build for only saving a few ounces.
I get that, but with good glass selection and using the same high end components I would anyway, you're saving half a pound just by switching to ti action.


Sent from my iPhone using Tapatalk

Offline MichaelJ

  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Mar 2007
  • Posts: 3075
  • Location: Washington/Idaho
    • www.facebook.com/hellscanyonarmory
Re: 7-300
« Reply #17 on: May 20, 2017, 03:08:17 PM »
I've built a half dozen or so 28's and the brass is very easy to smoke.... annealing after every firing, bushing dies, and realistic expectations of velocity helps. The 195's live at 3050fps with the properly throated reamer and 27"ish barrel. I'd go 7-300 personally.... just for the brass issue.

Mike


Sent from my iPhone using Tapatalk
Hells Canyon Armory Custom Rifles
https://www.facebook.com/HellsCanyonArmory/
HCARifles@gmail.com

Offline b23

  • Non-Hunting Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jan 2010
  • Posts: 3308
  • Location: Spokane Wa.
Re: 7-300
« Reply #18 on: May 20, 2017, 04:28:34 PM »
Curious, why would you do a 7-300 over say a 7 STW? 

I know you can get Bertram brass for the STW and that seems to be pretty good stuff.

What brass that's available for the 300WM is better than the 28 Nosler brass???

Offline Bigshooter

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Old Salt
  • ******
  • Join Date: Aug 2007
  • Posts: 6367
  • Location: Lewis Co
  • High Wide And Heavy
Re: 7-300
« Reply #19 on: May 20, 2017, 04:33:13 PM »
Curious, why would you do a 7-300 over say a 7 STW? 

I know you can get Bertram brass for the STW and that seems to be pretty good stuff.

What brass that's available for the 300WM is better than the 28 Nosler brass???


Me 2.
Welcome to liberal America, where the truth is condemned and facts are ignored so as not to "offend" anyone


"Borders, language, culture."

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31527
  • Location: Goldendale,WA
Re: 7-300
« Reply #20 on: May 20, 2017, 06:18:12 PM »
 :yeah: x3 I run a 6.5 and 7 STW. The 7 stw would be a great choice.
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline MichaelJ

  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Mar 2007
  • Posts: 3075
  • Location: Washington/Idaho
    • www.facebook.com/hellscanyonarmory
7-300
« Reply #21 on: May 21, 2017, 01:26:24 PM »
Curious, why would you do a 7-300 over say a 7 STW? 


Because I have access to a reamer for it.... 😜
Haven't built an STW yet. Wouldn't have any issues with it either. 👍

Mike


Sent from my iPhone using Tapatalk
Hells Canyon Armory Custom Rifles
https://www.facebook.com/HellsCanyonArmory/
HCARifles@gmail.com

 


* Advertisement

* Recent Topics

Looking for English Pointer pup (Elhew and/or Guard Rail lines) by Tafinder
[Today at 07:22:10 AM]


Steel Targets??? by rem700300
[Today at 06:54:16 AM]


Selkirk bull moose. by Turner89
[Today at 06:39:55 AM]


Buying pheasants for training by trapp01
[Yesterday at 08:44:40 PM]


Mt. Spokane North Moose by Farmer72
[Yesterday at 08:12:24 PM]


Greenriver quality Elk permit by First timer
[Yesterday at 03:13:57 PM]


Bow mount trolling motors by Stein
[Yesterday at 09:05:06 AM]


Oregon results posted. by trophyhunt
[Yesterday at 08:51:12 AM]


best draw for moose unit wise by hunter399
[Yesterday at 08:31:10 AM]


Idaho 2025 Controlled Hunts by trophyelk6x6
[Yesterday at 08:24:13 AM]


2025 OILS! by Ridgerunner
[Yesterday at 07:40:49 AM]


FFL preferences or warnings in Olympia or south Sound area? by lhrbull
[Yesterday at 06:59:24 AM]


Nooksack Archery Tag by LongBomb
[Yesterday at 06:29:37 AM]


I’m on a blacktail mission by Turner89
[June 13, 2025, 11:33:35 PM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[June 13, 2025, 09:54:06 PM]


Basin elk by hughjorgan
[June 13, 2025, 09:50:49 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal