collapse

Author Topic: Knight Bighorn front ramp  (Read 992 times)

Offline huntfish365

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Oct 2017
  • Posts: 5
  • Location: Ilwaco, WA
    • Brandon McMullen
  • Groups: N/A
Knight Bighorn front ramp
« on: October 23, 2017, 06:11:04 PM »
Anyone know what front ramp will work with a Lyman globe on my bighorn? I’ve researched a ton,  called brownells and still can’t find one. So I was hoping one of you may be able to help. TIA

Offline lazydrifter

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Nov 2008
  • Posts: 600
  • Location: Port Angeles
Re: Knight Bighorn front ramp
« Reply #1 on: October 24, 2017, 06:24:39 AM »
https://www.midwayusa.com/product/763623/marbles-front-sight-ramp-100-height-375-dovetail-slot-for-875-barrel-steel-blue

This is the one we used.  Fits both the bighorn and the Disc Extreme.   Only a one screw ramp so we used locktite under the ramp and on the scre.  No problems.

Offline huntfish365

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Oct 2017
  • Posts: 5
  • Location: Ilwaco, WA
    • Brandon McMullen
  • Groups: N/A
Re: Knight Bighorn front ramp
« Reply #2 on: November 30, 2017, 03:13:43 PM »
Did you use the Lyman globe with that dovetail?

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2024
  • Location: Idaho, Northern
Re: Knight Bighorn front ramp
« Reply #3 on: November 30, 2017, 03:48:07 PM »
Anyone know what front ramp will work with a Lyman globe on my bighorn? I’ve researched a ton,  called brownells and still can’t find one. So I was hoping one of you may be able to help. TIA

Why wouldn't the Williams Streamlined Ramp product #1690 - not work for that application?

Product Description

WILLIAMS STREAMLINED ‘SCREW-ON’ HOODLESS RAMP
The Williams Streamlined Ramps have a 3/8” dovetail and pleasing lines not found in any other ramp. The ramp is beautifully blued. 6-48 screws furnished.

Available in heights of: 9/16”, 7/16”, 3/8”, 5/16”, 3/16”.

Note: The 3/16” “Screw-On” ramp has 1.625” hole spacing. This is the one you would need for a Knight


All other “Screw-On” ramps have 2” hole spacing. Front sights should be ordered in (N) width.
Keep shooting muzzleloaders - They are a blast!!

 

* Recent Topics

Need some gear suggestions for 2019 by elkchaser54
[Today at 02:54:14 AM]


SB 5099 Would Require DNR to Establish Target Shooting Areas on DNR Lands by bearpaw
[Today at 02:17:14 AM]


looking to upgrade binos by Crunchy
[Today at 12:24:59 AM]


New Ford Ranger by Oh Mah
[Today at 12:18:36 AM]


Let’s See Those Waterdogs! by Special T
[Yesterday at 11:48:47 PM]


How many duck do you shoot per season? by fowl smacker
[Yesterday at 11:48:01 PM]


What do you cook with? by jmscon
[Yesterday at 11:33:40 PM]


Long range bear cal/rifle help needed by Dan-o
[Yesterday at 11:27:27 PM]


Have corn pond complexes affected your 2018 duck season? by EagleEye
[Yesterday at 10:06:52 PM]


new to the trapping world by greenhead_killer
[Yesterday at 10:01:13 PM]


Montana harvested 209 wolves by PlateauNDN
[Yesterday at 09:47:15 PM]


OnX pissn me off by Tbob
[Yesterday at 09:31:34 PM]


WTS: Eberlestock "Just One" Backpack ($150 below retail) by Kit Carson
[Yesterday at 09:17:18 PM]


SB 5148 Would Add "Hunter Pink" to Current Hunter Orange Requirements by Fl0und3rz
[Yesterday at 09:16:20 PM]


And that's why I'm done with PTG..... by b23
[Yesterday at 08:36:00 PM]


2019 spring bear? by RB
[Yesterday at 08:32:35 PM]


Kifaru AMR wolf grey by Wetwoodshunter
[Yesterday at 08:29:13 PM]


Quincy/Ephrata, conditions on the ground? by cdriver
[Yesterday at 08:24:39 PM]


Nitride Shoot in the Rock Pit (1-18-19) by reelamin
[Yesterday at 08:17:48 PM]


2019 sheds: post them here! by lewy
[Yesterday at 08:16:39 PM]