Author Topic: Trying to scope an old Savage 340, only two holes already there (Read 8503 times)

lokidog · « **on:** March 15, 2009, 08:52:46 PM »

Title pretty much says it. My wife got an old Savae 30-30 from her dad. Tried getting a weaver side mount figuring two hole was better than none, but the holes are not wide enough. Also the straight up ring attachment from my old Model 94 puts the scoope too far over the bolt.

Any ideas out there? Thanks

lazydrifter · « **Reply #1 on:** March 16, 2009, 07:40:14 AM »

it might be an old williams side mount that is drilled for. Can you get a measurement on the holes. I think I have an old williams side mount with the rings that go over the center of the barrel but they are high.

lokidog · « **Reply #2 on:** March 16, 2009, 08:34:19 AM »

Thanks, LD,

It appears to be a tiny bit over 29/32" or 0.91" from center to center. I don't have my calipers handy.

lazydrifter · « **Reply #3 on:** March 16, 2009, 11:21:02 AM »

They are pretty close to that. Here is some pictures. Tell me if you think it will work.
Is this rifle a bolt action or a lever action?

lazydrifter · « **Reply #4 on:** March 16, 2009, 11:24:52 AM »

Here is a picture I found on gunbroker. Looks different.

lazydrifter · « **Reply #5 on:** March 16, 2009, 11:44:14 AM »

http://www.e-gunparts.com/search_beta.asp

check this

lokidog · « **Reply #6 on:** March 16, 2009, 12:43:57 PM »

Looks like it might work. Couldn't find anything on Numerich's. I think it is the early 340 model (bolt) as there are weaver and b-squares for the 340 but not this one....

I'm trying to get this workin as my wife drew a multi deer tag this year. Her dad never got a deer with it, they were more beer (spelled correctly

) hunting than anything....

Thanks, Ed

lazydrifter · « **Reply #7 on:** March 16, 2009, 01:03:15 PM »

Well if you want to pm me an address I'll ship this over to you and if it works good and if it doesn't send it back. It is really light being alum. so it shouldn't cost much to ship.

lazydrifter · « **Reply #8 on:** March 18, 2009, 03:29:23 AM »

http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=19023&title=SIDE%20MOUNT%201

try calling Brownells too.

Jerbear · « **Reply #9 on:** March 27, 2009, 10:24:19 PM »

I had a 340 for years gave it to my brother. A very accurate rifle. The picture of the side mount that Lazydrifter shows is the one you need. Your rifle should already be tappped for that mount. I can't remember who makes the mount, but they are still around.

woodswalker · « **Reply #10 on:** March 27, 2009, 10:44:22 PM »

PM sent.

AWS · « **Reply #11 on:** March 27, 2009, 10:54:41 PM »

Can you post a picture of the left side of your 340 ?

AWS

Hunting Washington Forum

News:

Advertisement

Author Topic: Trying to scope an old Savage 340, only two holes already there (Read 8503 times)

lokidog

Trying to scope an old Savage 340, only two holes already there

lazydrifter

Re: Trying to scope an old Savage 340, only two holes already there

lokidog

Re: Trying to scope an old Savage 340, only two holes already there

lazydrifter

Re: Trying to scope an old Savage 340, only two holes already there

lazydrifter

Re: Trying to scope an old Savage 340, only two holes already there

lazydrifter

Re: Trying to scope an old Savage 340, only two holes already there

lokidog

Re: Trying to scope an old Savage 340, only two holes already there

lazydrifter

Re: Trying to scope an old Savage 340, only two holes already there

lazydrifter

Re: Trying to scope an old Savage 340, only two holes already there

Jerbear

Re: Trying to scope an old Savage 340, only two holes already there

woodswalker

Re: Trying to scope an old Savage 340, only two holes already there

AWS

Re: Trying to scope an old Savage 340, only two holes already there

Advertisement

Quick Links

Recent Topics