collapse

Advertisement


Author Topic: Shot placement for pelts  (Read 6436 times)

Offline kselkhunter

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2014
  • Posts: 1637
  • Location: United States
Shot placement for pelts
« on: April 12, 2019, 02:12:09 PM »
I didn't want to jack a couple other threads, and couldn't find the answer easily in the search function so thought I'd post the question assuming somebody probably knows the answer.   

If harvesting animals for pelts such as coyote, bobcat, etc. is it better to take the head shot or is a body shot OK?  If I get enough pelts to make it worth while to try to sell them, does it matter if I did the head shot as it relates to pelt value?


The reason I'm asking is some of my hunts will be an opportunistic harvest.  For example if a coyote or bobcat come into my calls for a bear.   Or if I'm out scouting for other purposes, and come across a coyote.  Most of those times my rifle of choice will be my 356 Winchester for the west side, although I will also have my 22lr Little Badger folded up in my pack should I see grouse or rabbit if it's that season.   I normally run 220gr Speer FN in the 356W, but also load some hard cast bullets at lower velocities.  My thinking is go for a head shot if a coyote or bobcat comes by.  Or if I have time to cycle the hard cast load in then should be OK for chest shots as the hard cast will just pass through on an animal that small.   For East side hunts I'm packing a much bigger gun, and head shots are the only option with those caliber choices.   Obviously for specific coyote-only hunts I'll have a more appropriate weapon on me...this question is specific to harvesting with a larger caliber opportunistically.

Thoughts on head shots impact on pelt values?   
« Last Edit: April 12, 2019, 02:17:53 PM by kselkhunter »

Offline WapitiTalk1

  • Business Sponsor
  • Trade Count: (+9)
  • Old Salt
  • *****
  • Join Date: Oct 2011
  • Posts: 7922
  • Location: Wet Side, Rainier, WA
  • Groups: RMEF, NRA, US Army (R)
Re: Shot placement for pelts
« Reply #1 on: April 12, 2019, 02:18:22 PM »
Way, way back in the day in MT (steel traps/tree cubby sets), we’d shoot em in the chest/heart with a .22 and clean up any blood left with a few handfuls of snow. Not sure what modern day trappers do?

Edit:  Sorry, selective hearing. I see now you’re not talking trapping but opportune shots. Probably any kill shot then (vitals or head)? with small caliber.
Darton Archery Maverick II
Traditions Vortek StrikeFire Smoke Pole
Weatherby VG-2 Boomstick
"Poking at a campfire with a stick is one of life's great satisfactions." Patrick F. McManus

Offline rasbo

  • Trade Count: (+1)
  • Legend
  • ******
  • Join Date: Aug 2008
  • Posts: 20144
  • Location: Grant county
  • In God I trust...Try taking that away from me!
Re: Shot placement for pelts
« Reply #2 on: April 12, 2019, 02:18:40 PM »
I head shoot them with any calibre, that 220 might poke a small hole being that heavy.

Offline AWS

  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2007
  • Posts: 1838
Re: Shot placement for pelts
« Reply #3 on: April 12, 2019, 04:04:37 PM »
Even when I was shooting cast bullets in a 300 Savage at $100. fox I used body shots.  Head shots are iffy at any distance and they are really messy to skin, blood running down the inside of cased pelts. with body shots you can stuff some paper towel in the entrance and exit holes for clean pelts.  Head shots can make for some ugly stretched pelts with gaping holes in the face and hard to keep on the point of the stretcher.
After the first shot the rest are just noise.

Make mine a Minaska

Offline kselkhunter

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2014
  • Posts: 1637
  • Location: United States
Re: Shot placement for pelts
« Reply #4 on: April 12, 2019, 04:52:15 PM »
Even when I was shooting cast bullets in a 300 Savage at $100. fox I used body shots.  Head shots are iffy at any distance and they are really messy to skin, blood running down the inside of cased pelts. with body shots you can stuff some paper towel in the entrance and exit holes for clean pelts.  Head shots can make for some ugly stretched pelts with gaping holes in the face and hard to keep on the point of the stretcher.

Thanks AWS.  That's what I was wondering.  I haven't shot an animal that small with my 356W, so not sure what kind of impact it would have on a heart/lung shot.   Granted given how tough that bullet is, rasbo is correct in that it probably won't cause too much of a hole as it probably won't open with that little resistance now that I think about it (that bullet is meant for elk/bear).  Thanks for the paper towel tip.  This will be my first year intentionally trying to collect pelts, so value your inputs and experiences.  Thanks. 
« Last Edit: April 12, 2019, 05:21:54 PM by kselkhunter »

Offline pd

  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Nov 2012
  • Posts: 2539
  • Location: Seattle?
Re: Shot placement for pelts
« Reply #5 on: April 12, 2019, 05:19:16 PM »
For what it's worth, I recently had the opportunity to dispatch a raccoon, and elected a head shot.  I am not sure I would do that again--what a bloody mess.  Next time I would probably go for a heart/lung shot.  This was with a .22LR, the entry and exit wound would be small.
Si vis pacem, para bellum

Offline AWS

  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2007
  • Posts: 1838
Re: Shot placement for pelts
« Reply #6 on: April 12, 2019, 05:37:36 PM »
I don't have any problem putting a 22 Short in the ear of a trapped animal, there isn't any exit and again you can pug the hole.  But that is a 3 or 4 foot shot, that's on coyotes, large coon and beaver that have a lot of slack in the tie down.
After the first shot the rest are just noise.

Make mine a Minaska

Offline lokidog

  • Trade Count: (+6)
  • Explorer
  • ******
  • Join Date: Mar 2009
  • Posts: 15186
  • Location: Sultan/Wisconsin
Re: Shot placement for pelts
« Reply #7 on: April 13, 2019, 10:57:06 AM »
For what it's worth, I recently had the opportunity to dispatch a raccoon, and elected a head shot.  I am not sure I would do that again--what a bloody mess.  Next time I would probably go for a heart/lung shot.  This was with a .22LR, the entry and exit wound would be small.

I've never had an exit wound from a .22lr on a coon head....

Offline Carp Commander

  • WA State Trappers Association
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jun 2012
  • Posts: 541
  • Location: Tri-Cities, WA
  • Groups: Washington Bowfishing Association
Re: Shot placement for pelts
« Reply #8 on: May 15, 2019, 04:31:15 AM »
I didn't want to jack a couple other threads, and couldn't find the answer easily in the search function so thought I'd post the question assuming somebody probably knows the answer.   

If harvesting animals for pelts such as coyote, bobcat, etc. is it better to take the head shot or is a body shot OK?  If I get enough pelts to make it worth while to try to sell them, does it matter if I did the head shot as it relates to pelt value?


The reason I'm asking is some of my hunts will be an opportunistic harvest.  For example if a coyote or bobcat come into my calls for a bear.   Or if I'm out scouting for other purposes, and come across a coyote.  Most of those times my rifle of choice will be my 356 Winchester for the west side, although I will also have my 22lr Little Badger folded up in my pack should I see grouse or rabbit if it's that season.   I normally run 220gr Speer FN in the 356W, but also load some hard cast bullets at lower velocities.  My thinking is go for a head shot if a coyote or bobcat comes by.  Or if I have time to cycle the hard cast load in then should be OK for chest shots as the hard cast will just pass through on an animal that small.   For East side hunts I'm packing a much bigger gun, and head shots are the only option with those caliber choices.   Obviously for specific coyote-only hunts I'll have a more appropriate weapon on me...this question is specific to harvesting with a larger caliber opportunistically.

Thoughts on head shots impact on pelt values?   

I buy a lot of fur and get asked this very question several times every winter. The damage done with a head shots makes for a mess and is difficult to make presentable. It also creates issue for the fur handler when stitching & boarding them.

It is much easier to stitch a reasonable size hole in the body than the head. If the head is not salvageable it eliminates the fur buyers option of tanning and selling as a wall-hanger because must people buying a wall-hanger want the face. Head shots also damage the skulls making them worthless.

I would suggested staying away from head shots. The current coyote market is high and they will still have value, depending on primeness, color, quality and size.
"Smoked carp taste just as good as smoked salmon, when you ain't got no salmon"

Rancid Crabtree

 


* Advertisement

* Recent Topics

Beaver Traps 4 Sale by Katalla
[Today at 08:00:20 PM]


Bear Season 2025 by Dan-o
[Today at 07:55:09 PM]


Still no bears by greenhead_killer
[Today at 07:45:00 PM]


New property cams checked by greenhead_killer
[Today at 07:16:15 PM]


New 2025 CVA Optima ? by lonedave
[Today at 06:38:59 PM]


Skyline by greenhead_killer
[Today at 06:19:57 PM]


Opening morning by Dave Workman
[Today at 05:56:23 PM]


3 pintails by hdshot
[Today at 05:30:29 PM]


Please Comment on new Game management Plan, RE Furbearers by Ric0
[Today at 04:25:35 PM]


American Legion Summer Raffle - $1000 Prize!!! by pianoman9701
[Today at 03:26:26 PM]


AUCTION: Custom knife by Alden Cole by Dan-o
[Today at 03:10:35 PM]


Velvet by Ricochet
[Today at 03:09:38 PM]


GROUSE 2025...the Season is looming! by Dave Workman
[Today at 12:54:35 PM]


Scope/mount options Ruger Ranch 5.56 by Westside88
[Today at 12:25:46 PM]


Anti-Snagging Rule ? by KNOPHISH
[Today at 11:29:59 AM]


Stone Glacier packs by pickardjw
[Today at 11:12:41 AM]


Cougar Tips by Deer slayer
[Today at 10:01:19 AM]


It's Starting by nwwanderer
[Today at 08:16:10 AM]


Koro Traps 4 Sale by Katalla
[Today at 05:29:58 AM]


Ten Years, and still plugging along by Dave Workman
[Today at 03:58:36 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal