130 gr. E-Tips for .270 Win

[SeaRun1]

Does anyone have any information on loads for the new Nosler E-Tip bullet.  I purchased some 130 grain bullets and want to develop a load for the .270 Win.  Curious that there isn't much load data for them anywhere.  Thanks in advance.

SeaRun1

[catwithboost]

Start with a 130gr standard load and just work from there. With each rifle shooting a little different you will just have to find the happy spot for your rifle and that bullet.
http://www.nosler.com/index.php?p=15&b=270cal

[bobcat]

I'd start with about 58 grains of H4831 and work up from there. I'd be curious to hear how that bullet shoots for you.

[SeaRun1]

Cat,

So do you mean that I should use the loads for Accubond/Ballistic Tips?

SeaRun1

[SeaRun1]

I just checked out that lnk so disregard the previous comment.  Problem is I the only suitable powders I have are IMR 4064, Varget and Win 760.  Anyone have a recipe for these powders?

SeaRun1

[Huntbear]

Have you looked at Nosler's site?  The give load data for their bullets.  Not sure if the Etip is on there yet though.

[jeepasaurusrex]

We use almost exclusively H4831 in our .270 loads. This is the Data I use.

Bullet                  Powder            Bullet Dia.   COL       Start GR.    FPS    Pressure
130 GR.HDY SP  Hodgdon H4831      .277"      3.180"         56.0        2843   44,400 CUP   

Max GR.     FPS            Pressure
60.0C        3019           51,000 CUP