collapse

Advertisement


Author Topic: Getting my Bearings  (Read 3458 times)

Offline SpicyTacos

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Feb 2015
  • Posts: 137
  • Location: Wet side
Getting my Bearings
« on: February 25, 2020, 03:49:59 PM »
I want to put this out there in the world. To give it power, strength and a voice. I can not stop thinking about the hunt. Seems religious.

I am going to get my first bear this year. I am going to take photos and post my story.

Holler out for all the positive vibes, enthusiasm, woo woo, prayers, spirts, bear Jesus.

I am focusing on the NE part of Wa. State.

Thanks

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 4515
  • Location: UNGULATE FREE ZONE UNIT 121
Re: Getting my Bearings
« Reply #1 on: February 25, 2020, 03:58:58 PM »
Good place to start.  Google earth scout north and south of hwy 20 east slope of sherman pass, in or above any drainage.  Same goes west of summit.  Hills north of Spokane reservation, glass cuts same thing in or above drainages. 

Offline flyfishWA

  • WA State Trappers Association
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jun 2018
  • Posts: 356
  • Location: Yacolt
Re: Getting my Bearings
« Reply #2 on: February 25, 2020, 05:36:16 PM »
use a predator call
"speak softly and carry a big stick" Theodore Roosevelt

Offline SpicyTacos

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Feb 2015
  • Posts: 137
  • Location: Wet side
Re: Getting my Bearings
« Reply #3 on: February 26, 2020, 10:08:42 AM »
Thanks for the info!

Ooohhhhhmmmmmm.

Summoning my future self with the future self of the future spirit of the future bear spirit.

Align the universe to my consciousness and pursuit of the bear.

Thank you Bear Jesus

Ohhmmmnnnnn

Offline JakeLand

  • WA State Trappers Association
  • Trade Count: (+35)
  • Frontiersman
  • *****
  • Join Date: Oct 2011
  • Posts: 4492
  • Location: Wet side
Re: Getting my Bearings
« Reply #4 on: February 26, 2020, 08:10:37 PM »
 :o

Offline HellsBelle

  • Women's Board
  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Feb 2020
  • Posts: 20
  • Location: OAKVILLE
    • Melody Sexton Hubbard
  • Groups: NRA
Re: Getting my Bearings
« Reply #5 on: February 26, 2020, 08:14:25 PM »
Hey, best of luck! If you get a nice fat bear, please consider rendering the fat, it is great for baking or making soap...

Offline SpicyTacos

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Feb 2015
  • Posts: 137
  • Location: Wet side
Re: Getting my Bearings
« Reply #6 on: February 28, 2020, 08:14:03 AM »
Hey, best of luck! If you get a nice fat bear, please consider rendering the fat, it is great for baking or making soap...

Thanks for the info. I have never rendered bear fat. I have only heard of people doing it. I have heard of people making bear fat/berry/nut bars. Have you ever done that?
Also the bear soap idea is intriguing. Do you have more insight on that? I could summon the all mighty google search engine. However I am more interested in first hand info if your willing to share.

Offline Ghost Hunter

  • Trade Count: (+2)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 5397
  • Location: SW <-> NE
  • Groups: NRA Patron Life Member, RMEF Life, Sponser Member
Re: Getting my Bearings
« Reply #7 on: February 28, 2020, 07:18:46 PM »
I've got a gallon of WY bear lard in the frig.  Can't talk the lady into baking a pie.  Soap might be a good bet.  Rendering is easy if the wife is gone for a few days.  Just keep cooking it down slow.
Economy failure = Too many people spending money they don't have on things they don't need to impress people they don't like.

Offline sjhgraysage

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Jun 2009
  • Posts: 397
  • Location: Spokane
Re: Getting my Bearings
« Reply #8 on: March 11, 2020, 03:30:45 PM »
Good luck! I hope you do well.
Just realize you will be driving past lots and lots of bears from where you are to NE WA.

Offline jrebel

  • Non-Hunting Topics
  • Trade Count: (+24)
  • Explorer
  • ******
  • Join Date: Feb 2008
  • Posts: 11322
  • Location: East Wenatchee
Re: Getting my Bearings
« Reply #9 on: March 11, 2020, 03:59:23 PM »
Good luck! I hope you do well.
Just realize you will be driving past lots and lots of bears from where you are to NE WA.

 :tup: :tup: :yeah:

My thoughts exactly.  This state is full of bear so why drive 5 hours when you can kill one withing an hour or two of your house?  Maybe just checking out new ground...which is never a bad reason.  Good Luck.


Offline SpicyTacos

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Feb 2015
  • Posts: 137
  • Location: Wet side
Re: Getting my Bearings
« Reply #10 on: March 11, 2020, 09:04:18 PM »
Good luck! I hope you do well.
Just realize you will be driving past lots and lots of bears from where you are to NE WA.

That is really good advice. I think I will check out some of the areas around Mt. Baker and around Darrington. 

I will also go to NE Wa. I really like the country up there i Salmo Preiat wilderness. Hoping for best. Thanks for the encouragement.

Offline Onewhohikes

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Feb 2020
  • Posts: 591
  • Location: Monroe
Re: Getting my Bearings
« Reply #11 on: March 12, 2020, 05:35:22 AM »
Hey Taco take a few other predators out while your at it

Offline SpicyTacos

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Feb 2015
  • Posts: 137
  • Location: Wet side
Re: Getting my Bearings
« Reply #12 on: March 12, 2020, 09:32:00 PM »
Hey Taco take a few other predators out while your at it

I’ll do my best. Chomping at the bit to get into the mountains.

 


* Advertisement

* Recent Topics

Cowiche Quality Buck by tvandy45
[Today at 06:32:20 AM]


Son drawn - Silver Dollar Youth Any Elk - Help? by Rugergunsite308
[Today at 06:27:17 AM]


Bow mount trolling motors by CP
[Today at 06:03:13 AM]


2025 Draw Results by Bullkllr
[Today at 05:58:56 AM]


SE raffle tags holder by HntnFsh
[Today at 05:39:57 AM]


11th Annual 'Pull For Scouting' Clay Crushing Classic by high_hunter
[Today at 12:27:18 AM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by high_hunter
[Today at 12:21:33 AM]


Ritzville Rifle Buck - GMU 284 by high_hunter
[Yesterday at 11:49:16 PM]


Antlerless Moose more than once? by shootem
[Yesterday at 11:25:51 PM]


Nooksack Muzzleloader Bull Tag by high_hunter
[Yesterday at 10:42:24 PM]


My wife drew quality deer DESERT rifle 10/18-10/26!!!!! by high_hunter
[Yesterday at 10:17:15 PM]


Palouse buck deer by blumtnelkndeer
[Yesterday at 10:14:00 PM]


Drew Quality by Jimmer
[Yesterday at 09:34:00 PM]


Nevada guide draw Mule Deer by Beastmonger1987
[Yesterday at 09:33:34 PM]


Quality Swakane by Rainier10
[Yesterday at 09:09:17 PM]


Observatory quality bull rifle by buglebuster
[Yesterday at 09:00:02 PM]


Anterless 1334 muzzle loader by Bdawg
[Yesterday at 08:46:31 PM]


A little Martini Cadet varmint rifle I have been working on by JDHasty
[Yesterday at 08:43:33 PM]


Pogue Quality by geauxtigers
[Yesterday at 08:38:35 PM]


2025 OILS! by HUNTNORTHWEST
[Yesterday at 07:46:27 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal