collapse

Advertisement


Author Topic: F350 front end shake  (Read 7483 times)

Offline gutsnthegrass

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Jan 2010
  • Posts: 538
  • Location: Enumclaw
F350 front end shake
« on: June 02, 2020, 01:30:07 PM »
I have a 2012 F-350 that has 90,000 miles.  I drove over to Idaho last weekend and noticed my front end shaking pretty bad on the stretch of road between Othello and Washtucna.  It was bad enough I had to ride on the fog line and center of the lane to get a somewhat smooth ride.  I just replaced my shocks last fall so they should be ok.  Any other suggestions on what it could be?  All ball joints and tie rods are still factory.  I do have a level kit if that makes a difference.  I make that drive several times a year and this is the first time I've had this happen, so something has to be loose or worn.

Offline Skillet

  • Business Sponsor
  • Trade Count: (+43)
  • Old Salt
  • *****
  • Join Date: Jun 2009
  • Posts: 5823
  • Location: Sitka, AK
Re: F350 front end shake
« Reply #1 on: June 02, 2020, 01:37:57 PM »
My first thought was "ball joints." 90k miles is a little early for them, but you're close to replacement time. To check, jack up the front end and see if you have any play.  The uppers on my F250 went away at 125k. 

KABOOM Count - 1

"The ocean is calling, and I must go."

"Does anyone know where the love of God goes, when the waves turn the minutes to hours?"
     - Gordon Lightfoot

Offline Woodchuck

  • GO TEAM!!!
  • Global Moderator
  • Trade Count: (+13)
  • Explorer
  • *****
  • Join Date: Mar 2009
  • Posts: 12147
  • Location: Walla Walla
  • HuntWA Woodblock
Re: F350 front end shake
« Reply #2 on: June 02, 2020, 01:46:44 PM »
Ball joints are very popular on those. Have you had an alignment lately?
Antlered rabbit tastes like chicken


Inuendo, wasn't he an Italian proctoligist?

Offline gutsnthegrass

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Jan 2010
  • Posts: 538
  • Location: Enumclaw
Re: F350 front end shake
« Reply #3 on: June 02, 2020, 01:53:43 PM »
Ball joints are very popular on those. Have you had an alignment lately?

No, I haven't.  The steering seems to track straight and my tire wear is pretty even.  Something to consider for sure.

Offline Woodchuck

  • GO TEAM!!!
  • Global Moderator
  • Trade Count: (+13)
  • Explorer
  • *****
  • Join Date: Mar 2009
  • Posts: 12147
  • Location: Walla Walla
  • HuntWA Woodblock
Re: F350 front end shake
« Reply #4 on: June 02, 2020, 02:09:19 PM »
Ball joints are very popular on those. Have you had an alignment lately?

No, I haven't.  The steering seems to track straight and my tire wear is pretty even.  Something to consider for sure.
I would suggest getting a front end inspection done before alignment. Steering and suspension components get popular at that mileage. If any of it does need replaced you will need an alignment after. Can you jack up the front end and spin the front wheels? Look for any bulges or irregularities in the tread as it spins. Does it do it at low speed or just highway?
Antlered rabbit tastes like chicken


Inuendo, wasn't he an Italian proctoligist?

Offline 2MANY

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Old Salt
  • ******
  • Join Date: Jun 2013
  • Posts: 5059
  • Location: Yup
Re: F350 front end shake
« Reply #5 on: June 02, 2020, 02:19:41 PM »
Cheap leveling kits without the rest of the components that should be replaced come to mind.

Good luck with your wobble.

Offline gutsnthegrass

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Jan 2010
  • Posts: 538
  • Location: Enumclaw
Re: F350 front end shake
« Reply #6 on: June 02, 2020, 02:20:35 PM »
Yes, I was going to put it up on jackstands tonight and check for play also.  It only does it at highway speeds on rough road.

Offline gutsnthegrass

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Jan 2010
  • Posts: 538
  • Location: Enumclaw
Re: F350 front end shake
« Reply #7 on: June 02, 2020, 02:21:52 PM »
Cheap leveling kits without the rest of the components that should be replaced come to mind.

Good luck with your wobble.

I have had the level kit for 40,000 miles with no issues. 

Offline Woodchuck

  • GO TEAM!!!
  • Global Moderator
  • Trade Count: (+13)
  • Explorer
  • *****
  • Join Date: Mar 2009
  • Posts: 12147
  • Location: Walla Walla
  • HuntWA Woodblock
Re: F350 front end shake
« Reply #8 on: June 02, 2020, 02:47:28 PM »
Yes, I was going to put it up on jackstands tonight and check for play also.  It only does it at highway speeds on rough road.
My non politically motivated SWAG is that it has either pitched a wheel weight or you have a tread separation starting. Look for clean spots on the rims where a weight may have been.  :twocents:
Antlered rabbit tastes like chicken


Inuendo, wasn't he an Italian proctoligist?

Offline ne kid

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jun 2016
  • Posts: 493
  • Location: ferry county
Re: F350 front end shake
« Reply #9 on: June 02, 2020, 02:58:20 PM »
I have an older F350 that shakes really bad on a section of road feels like the only time I'm on the road is when I cross it. All new front end come to find out for me it was the tires just don't like the ruts in that part of the road. Strangest thing I've ever seen.

Online Huntin4Ever

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2013
  • Posts: 102
  • Location: Olympic Peninsula
Re: F350 front end shake
« Reply #10 on: June 02, 2020, 03:09:44 PM »
I have a 2014 F350, same thing happened to me at highway speeds, the shake was pretty severe. Ended up being the panhard / track bar.

Online CP

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Mar 2008
  • Posts: 7030
  • Location: Mukilteo
Re: F350 front end shake
« Reply #11 on: June 02, 2020, 03:25:31 PM »
Could be the tires.

Offline jackelope

  • Administrator
  • Trade Count: (+29)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50300
  • Location: Duvall, WA
  • Groups: jackelope
Re: F350 front end shake
« Reply #12 on: June 02, 2020, 04:28:15 PM »
Ball joints
Tie rods
Trac bar/trac bar ball joint*
Steering dampener
Tires

Any or all of the above.
:fire.:

" In today's instant gratification society, more and more pressure revolves around success and the measurement of one's prowess as a hunter by inches on a score chart or field photos produced on social media. Don't fall into the trap. Hunting is-and always will be- about the hunt, the adventure, the views, and time spent with close friends and family. " Ryan Hatfield

My posts, opinions and statements do not represent those of this forum

Offline jackelope

  • Administrator
  • Trade Count: (+29)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50300
  • Location: Duvall, WA
  • Groups: jackelope
Re: F350 front end shake
« Reply #13 on: June 02, 2020, 04:30:19 PM »
My first thought was "ball joints." 90k miles is a little early for them, but you're close to replacement time. To check, jack up the front end and see if you have any play.  The uppers on my F250 went away at 125k. 



90k isn't early on these. I mean...it may seem like it should be early, but it's not early in terms of commonality.


:fire.:

" In today's instant gratification society, more and more pressure revolves around success and the measurement of one's prowess as a hunter by inches on a score chart or field photos produced on social media. Don't fall into the trap. Hunting is-and always will be- about the hunt, the adventure, the views, and time spent with close friends and family. " Ryan Hatfield

My posts, opinions and statements do not represent those of this forum

Offline LDennis24

  • Bear poker
  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2010
  • Posts: 5452
Re: F350 front end shake
« Reply #14 on: June 02, 2020, 04:41:09 PM »
Yes, I was going to put it up on jackstands tonight and check for play also.  It only does it at highway speeds on rough road.
My non politically motivated SWAG is that it has either pitched a wheel weight or you have a tread separation starting. Look for clean spots on the rims where a weight may have been.  :twocents:

 :yeah:

I didn't read the rest of folks posts but this can definitely do what your describing. Go have the tires rebalanced. Do you have those stupid beads for balancing... If so toss'em and go get weights put on. If you use the beads and accelerate too quickly the beads get stuck by inertia and stay in one spot in the tire. They suck...

 


* Advertisement

* Recent Topics

A. Cole Lockback in AEB-L and Micarta by A. Cole
[Today at 09:15:34 AM]


Willapa Hills 1 Bear by hunter399
[Today at 08:24:48 AM]


Unit 364 Archery Tag by pcveen
[Today at 08:18:37 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by Threewolves
[Today at 06:35:57 AM]


In the background by nwwanderer
[Today at 05:33:06 AM]


1993 Merc issues getting up on plane by addicted1
[Yesterday at 09:02:37 PM]


Sockeye Numbers by Southpole
[Yesterday at 09:02:04 PM]


3 pintails by Dan-o
[Yesterday at 07:20:12 PM]


Selkirk bull moose. by moose40
[Yesterday at 05:42:19 PM]


North Peninsula Salmon Fishing by Buckhunter24
[Yesterday at 12:43:12 PM]


2025 Crab! by trophyhunt
[Yesterday at 11:09:27 AM]


erronulvin trail cam photos by kodiak06
[Yesterday at 10:19:35 AM]


Yard babies by Feathernfurr
[Yesterday at 09:55:24 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal