collapse

Advertisement


Author Topic: F350 front end shake  (Read 7925 times)

Offline gutsnthegrass

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Jan 2010
  • Posts: 552
  • Location: Enumclaw
F350 front end shake
« on: June 02, 2020, 01:30:07 PM »
I have a 2012 F-350 that has 90,000 miles.  I drove over to Idaho last weekend and noticed my front end shaking pretty bad on the stretch of road between Othello and Washtucna.  It was bad enough I had to ride on the fog line and center of the lane to get a somewhat smooth ride.  I just replaced my shocks last fall so they should be ok.  Any other suggestions on what it could be?  All ball joints and tie rods are still factory.  I do have a level kit if that makes a difference.  I make that drive several times a year and this is the first time I've had this happen, so something has to be loose or worn.

Offline Skillet

  • Business Sponsor
  • Trade Count: (+43)
  • Old Salt
  • *****
  • Join Date: Jun 2009
  • Posts: 5859
  • Location: Sitka, AK
Re: F350 front end shake
« Reply #1 on: June 02, 2020, 01:37:57 PM »
My first thought was "ball joints." 90k miles is a little early for them, but you're close to replacement time. To check, jack up the front end and see if you have any play.  The uppers on my F250 went away at 125k. 

KABOOM Count - 1

"The ocean is calling, and I must go."

"Does anyone know where the love of God goes, when the waves turn the minutes to hours?"
     - Gordon Lightfoot

Offline Woodchuck

  • GO TEAM!!!
  • Global Moderator
  • Trade Count: (+13)
  • Explorer
  • *****
  • Join Date: Mar 2009
  • Posts: 12172
  • Location: Walla Walla
  • HuntWA Woodblock
Re: F350 front end shake
« Reply #2 on: June 02, 2020, 01:46:44 PM »
Ball joints are very popular on those. Have you had an alignment lately?
Antlered rabbit tastes like chicken


Inuendo, wasn't he an Italian proctoligist?

Offline gutsnthegrass

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Jan 2010
  • Posts: 552
  • Location: Enumclaw
Re: F350 front end shake
« Reply #3 on: June 02, 2020, 01:53:43 PM »
Ball joints are very popular on those. Have you had an alignment lately?

No, I haven't.  The steering seems to track straight and my tire wear is pretty even.  Something to consider for sure.

Offline Woodchuck

  • GO TEAM!!!
  • Global Moderator
  • Trade Count: (+13)
  • Explorer
  • *****
  • Join Date: Mar 2009
  • Posts: 12172
  • Location: Walla Walla
  • HuntWA Woodblock
Re: F350 front end shake
« Reply #4 on: June 02, 2020, 02:09:19 PM »
Ball joints are very popular on those. Have you had an alignment lately?

No, I haven't.  The steering seems to track straight and my tire wear is pretty even.  Something to consider for sure.
I would suggest getting a front end inspection done before alignment. Steering and suspension components get popular at that mileage. If any of it does need replaced you will need an alignment after. Can you jack up the front end and spin the front wheels? Look for any bulges or irregularities in the tread as it spins. Does it do it at low speed or just highway?
Antlered rabbit tastes like chicken


Inuendo, wasn't he an Italian proctoligist?

Offline 2MANY

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Old Salt
  • ******
  • Join Date: Jun 2013
  • Posts: 5193
  • Location: Yup
Re: F350 front end shake
« Reply #5 on: June 02, 2020, 02:19:41 PM »
Cheap leveling kits without the rest of the components that should be replaced come to mind.

Good luck with your wobble.

Offline gutsnthegrass

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Jan 2010
  • Posts: 552
  • Location: Enumclaw
Re: F350 front end shake
« Reply #6 on: June 02, 2020, 02:20:35 PM »
Yes, I was going to put it up on jackstands tonight and check for play also.  It only does it at highway speeds on rough road.

Offline gutsnthegrass

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Jan 2010
  • Posts: 552
  • Location: Enumclaw
Re: F350 front end shake
« Reply #7 on: June 02, 2020, 02:21:52 PM »
Cheap leveling kits without the rest of the components that should be replaced come to mind.

Good luck with your wobble.

I have had the level kit for 40,000 miles with no issues. 

Offline Woodchuck

  • GO TEAM!!!
  • Global Moderator
  • Trade Count: (+13)
  • Explorer
  • *****
  • Join Date: Mar 2009
  • Posts: 12172
  • Location: Walla Walla
  • HuntWA Woodblock
Re: F350 front end shake
« Reply #8 on: June 02, 2020, 02:47:28 PM »
Yes, I was going to put it up on jackstands tonight and check for play also.  It only does it at highway speeds on rough road.
My non politically motivated SWAG is that it has either pitched a wheel weight or you have a tread separation starting. Look for clean spots on the rims where a weight may have been.  :twocents:
Antlered rabbit tastes like chicken


Inuendo, wasn't he an Italian proctoligist?

Offline ne kid

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jun 2016
  • Posts: 493
  • Location: ferry county
Re: F350 front end shake
« Reply #9 on: June 02, 2020, 02:58:20 PM »
I have an older F350 that shakes really bad on a section of road feels like the only time I'm on the road is when I cross it. All new front end come to find out for me it was the tires just don't like the ruts in that part of the road. Strangest thing I've ever seen.

Offline Huntin4Ever

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2013
  • Posts: 103
  • Location: Olympic Peninsula
Re: F350 front end shake
« Reply #10 on: June 02, 2020, 03:09:44 PM »
I have a 2014 F350, same thing happened to me at highway speeds, the shake was pretty severe. Ended up being the panhard / track bar.

Offline CP

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Mar 2008
  • Posts: 7218
  • Location: Mukilteo
Re: F350 front end shake
« Reply #11 on: June 02, 2020, 03:25:31 PM »
Could be the tires.

Offline jackelope

  • Administrator
  • Trade Count: (+29)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50753
  • Location: Duvall, WA
  • Groups: jackelope
Re: F350 front end shake
« Reply #12 on: June 02, 2020, 04:28:15 PM »
Ball joints
Tie rods
Trac bar/trac bar ball joint*
Steering dampener
Tires

Any or all of the above.
"Hate speech does not exist legally in America. There's ugly speech. There's gross speech. There's evil speech. And ALL of it is protected by the First Amendment."

Offline jackelope

  • Administrator
  • Trade Count: (+29)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50753
  • Location: Duvall, WA
  • Groups: jackelope
Re: F350 front end shake
« Reply #13 on: June 02, 2020, 04:30:19 PM »
My first thought was "ball joints." 90k miles is a little early for them, but you're close to replacement time. To check, jack up the front end and see if you have any play.  The uppers on my F250 went away at 125k. 



90k isn't early on these. I mean...it may seem like it should be early, but it's not early in terms of commonality.


"Hate speech does not exist legally in America. There's ugly speech. There's gross speech. There's evil speech. And ALL of it is protected by the First Amendment."

Offline LDennis24

  • Bear poker
  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2010
  • Posts: 5453
Re: F350 front end shake
« Reply #14 on: June 02, 2020, 04:41:09 PM »
Yes, I was going to put it up on jackstands tonight and check for play also.  It only does it at highway speeds on rough road.
My non politically motivated SWAG is that it has either pitched a wheel weight or you have a tread separation starting. Look for clean spots on the rims where a weight may have been.  :twocents:

 :yeah:

I didn't read the rest of folks posts but this can definitely do what your describing. Go have the tires rebalanced. Do you have those stupid beads for balancing... If so toss'em and go get weights put on. If you use the beads and accelerate too quickly the beads get stuck by inertia and stay in one spot in the tire. They suck...

 


* Advertisement

* Recent Topics

Nevada bull hunt 2025 by andrew_in_idaho
[Yesterday at 11:58:20 PM]


What gmu's in sw Washington hold elk? by Kc_Kracker
[Yesterday at 11:10:17 PM]


Called about Returned Alta Buck Permit by Shrimper
[Yesterday at 10:17:51 PM]


Question about hunting wilderness areas by Boar
[Yesterday at 09:58:35 PM]


2025 deer, let's see em! by dmoua
[Yesterday at 09:57:13 PM]


My Entiat Late tag thread by Lapua338
[Yesterday at 09:46:32 PM]


Pouge unit help by Bone collector 13
[Yesterday at 08:57:11 PM]


New scope or not? by JWBINX
[Yesterday at 08:44:56 PM]


Idaho unit 10A by Naches Sportsman
[Yesterday at 08:44:27 PM]


Any MT deer updates? by Britt-dog
[Yesterday at 08:32:50 PM]


Grizzly? by WapitiTalk1
[Yesterday at 07:38:21 PM]


Smith-Reynolds American Legion Post #14 Fall Raffle by Stein
[Yesterday at 07:35:27 PM]


Cash Poor/Equity Rich And Don't Want To Refinance by pianoman9701
[Yesterday at 07:13:04 PM]


Palouse buck deer by high_hunter
[Yesterday at 06:27:11 PM]


What pond creature am I dealing with here? by Barehunter
[Yesterday at 06:16:30 PM]


2025 Quality Chewuch Tag by Schmalzfam
[Yesterday at 05:53:47 PM]


What are some good 12 ga factory loads for predators? by fowl smacker
[Yesterday at 05:29:34 PM]


cougar calling locations by MADMAX
[Yesterday at 05:06:42 PM]


121 Quality November 20-24 by ladder85
[Yesterday at 04:57:59 PM]


2025 blacktail rut thread by lazydrifter
[Yesterday at 04:05:37 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal