collapse

Advertisement


Author Topic: Clear cuts gmu 651  (Read 985 times)

Offline Natas5150

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2011
  • Posts: 99
Clear cuts gmu 651
« on: September 30, 2020, 12:23:19 PM »
So I recently bought a pass for green diamond land. This past weekend I went to gmu 651 satsop which is owned by green diamond and needs a pass. However the couple of gates I hunted the forest was pretty over grown or about 10 years old from being clear cut. I mostly hit the few gates on matlock side in between gmu 633 and 651. I did not check other gates. Does anyone know if there are clear cuts in the area owned by green diamond? Perhaps further in or near another gate. I really didn't do my homework on this. Just wondering for future hunts if there are clear cuts on the land.

Offline fly-by

  • Forum Sponsor
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Nov 2011
  • Posts: 564
  • Location: Snoqualmie, WA
Re: Clear cuts gmu 651
« Reply #1 on: September 30, 2020, 12:41:47 PM »
You should be able to see on Google earth if there are recent cuts a reasonable distance from the gate.  Looks like imagery from that area is as of 7/21/18.

Offline Platensek-po

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Oct 2018
  • Posts: 1521
  • Location: Shelton, wa
Re: Clear cuts gmu 651
« Reply #2 on: September 30, 2020, 12:53:19 PM »
So I recently bought a pass for green diamond land. This past weekend I went to gmu 651 satsop which is owned by green diamond and needs a pass. However the couple of gates I hunted the forest was pretty over grown or about 10 years old from being clear cut. I mostly hit the few gates on matlock side in between gmu 633 and 651. I did not check other gates. Does anyone know if there are clear cuts in the area owned by green diamond? Perhaps further in or near another gate. I really didn't do my homework on this. Just wondering for future hunts if there are clear cuts on the land.

Tons of clear cuts out there. They get hit hard and often by all the people that bought that pass. Google earth and then go and check it out in person.
“Under no pretext should arms and ammunition be surrendered; any attempt to disarm the workers must be frustrated, by force if necessary.”

If you are not willing to die for freedom then take the word out of your vocabulary.

Offline logola512c

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Aug 2018
  • Posts: 260
  • Location: seattle
Re: Clear cuts gmu 651
« Reply #3 on: September 30, 2020, 01:28:15 PM »
Find the clear cuts that you can't drive to/through, and that take some effort to get to. Can't count the number of times I set up an hour or two before dawn on the edge of a promising clear cut, just to have endless trucks slowly rolling through with one person driving and another hanging out the window with a rifle in hand.  I'd disparage them, but those tactics filled more tags than than I did there, so while I took home the pride of a good hunt they went home and ate bacon-wrapped backstrap...  Although truth be told, if you do see a truck, watch about a hundred yards behind it.  Blacktail sometimes spooked at the trucks and moved after the trucks rolled through.

I actually had my best luck there by going on the main road to the north of the property and then looking for the "caution deer crossing" signs and then going 50-100 yards into the woods from there.  Road crews often put those signs where they do for a reason...

 


* Advertisement

* Recent Topics

Montana Bull Elk "Recovery" by rmadsen
[Today at 02:48:51 PM]


!!!HELP!!! McNary wildlife refuge duck hunting by gallion_t
[Today at 02:43:32 PM]


Guidance to hunting new area by Kingofthemountain83
[Today at 02:17:06 PM]


RRS Lever Release Clamp for Ball Head by pickardjw
[Today at 01:49:57 PM]


Traditions Hawken Woodsman need repair? by ghosthunter
[Today at 01:25:30 PM]


Roosevelt Elk. Please nudge me in the right direction. I feel hopeless. by blackveltbowhunter
[Today at 11:32:45 AM]


How is late season whitetail hunting? Good, bad, decent? GMU 105/117? by WoodHacker
[Today at 10:56:33 AM]


Multi season elk by Sundance
[Today at 10:39:42 AM]


High end binocs by Snakeriver
[Today at 10:12:09 AM]


Any MT deer updates? by Tbob
[Today at 10:09:28 AM]


WTS: reloading components by Smkn_brl00
[Today at 09:43:03 AM]


Taneum Elk Cow tag problem by Ewoiwod
[Today at 08:12:32 AM]


My Wenaha bull by Gonehuntin01
[Today at 08:08:05 AM]


BNSF Land Access by Sandberm
[Today at 06:58:18 AM]


Slide Ridge Quality tag holders by Britt-dog
[Today at 06:09:06 AM]


2025 elk success thread!! by jeffitz
[Today at 04:04:14 AM]


My Entiat Late tag thread by scottfrick
[Yesterday at 10:15:40 PM]


Stevens double barrel 410 by scotsman
[Yesterday at 09:39:58 PM]


Xlr element vs mdt hnt26 by dmoua
[Yesterday at 09:30:35 PM]


2025 blacktail rut thread by HntnFsh
[Yesterday at 08:55:39 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal