collapse

Advertisement


Author Topic: Smith & Wesson Shield EZ Recall  (Read 1025 times)

Offline Machias

  • Trapper
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Mar 2007
  • Posts: 18941
  • Location: Worley, ID
Smith & Wesson Shield EZ Recall
« on: November 26, 2020, 06:40:09 PM »
I just bought one of these and it is affected by this recall.  Passing along in case others are un-aware.

Smith & Wesson has issued a Safety Recall Notice for certain M&P Shield EZ Pistols manufactured between March 1, 2020 and October 31, 2020.

The official press release reads as follows:

SPRINGFIELD, Mass., (November 23, 2020) – Smith & Wesson Inc. announced today that the Company has identified two M&P Shield EZ Pistols on which the hammers manufactured by our supplier were cracked. In those firearms, the hammer failed to fully engage the sear, causing the round to fire, cycling the slide, and potentially resulting in multiple discharges without depressing the trigger. In all cases, the firearm will NOT fire unless the grip safety is depressed. While this condition has been found only in two hammers, and our investigation suggests that these two incidents are very isolated, any unintended discharge of a firearm has the potential to cause injury. Therefore, we have established this Safety Recall as a precautionary measure to ensure that all M&P Shield EZ Pistols in service meet our design specifications, as any unintended discharge of a firearm has the potential to cause injury. This notice applies ONLY to M&P Shield EZ pistols (including Performance Center models) manufactured between March 1, 2020 and October 31, 2020, and only to a small percentage of that population. It does NOT apply to all SHIELD pistols.

Stop using your M&P Shield EZ pistol until you determine whether it is included in this safety recall, and if so, until it has been inspected and repaired by Smith & Wesson, if necessary.

We are asking consumers of all M&P9 Shield EZ, and M&P380 Shield EZ, including Performance Center models, to go to MPShieldEZrecall.com and input their serial number, or call 888-871-7114, to determine whether the hammer of their M&P Shield EZ Pistol was from a manufacturing lot that was potentially affected. This notice applies ONLY to certain M&P Shield EZ model pistols, and not all M&P Shield pistols.
Fred Moyer

When it's Grim, be the GRIM REAPER!

Offline Bango skank

  • Political & Covid-19 Topics
  • Trade Count: (+9)
  • Old Salt
  • ******
  • Join Date: May 2014
  • Posts: 5880
  • Location: colville
Re: Smith & Wesson Shield EZ Recall
« Reply #1 on: November 26, 2020, 06:48:02 PM »
So this crack in the hammer makes it full auto?  Did i read that right?  Sounds pretty sweet.

Offline Jason

  • Political & Covid-19 Topics
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3562
  • Location: Kalama
Re: Smith & Wesson Shield EZ Recall
« Reply #2 on: November 26, 2020, 06:49:33 PM »
So this crack in the hammer makes it full auto?  Did i read that right?  Sounds pretty sweet.
:yeah:  :chuckle:

 


* Advertisement

* Recent Topics

GMU 247 Entiat bear hunting by Rutnbuxnbulls
[Today at 04:25:38 AM]


Anybody breeding meat rabbit? by HighlandLofts
[Today at 02:36:05 AM]


AUCTION: Custom knife by Alden Cole by b0bbyg
[Yesterday at 10:51:49 PM]


Wall Tents Tips and Tricks by ghosthunter
[Yesterday at 10:33:57 PM]


Spot lock in the salt? by CastleRocker
[Yesterday at 09:53:21 PM]


More Kings! by bigdub257
[Yesterday at 09:42:31 PM]


2025 Washington Rocky Mountain Bighorn Sheep Raffle by trophyhunt
[Yesterday at 08:15:41 PM]


Calling in August in Western Washington by bearmanric
[Yesterday at 06:43:42 PM]


Nice bull? by Kingofthemountain83
[Yesterday at 06:01:05 PM]


Tease 'l' by kellama2001
[Yesterday at 12:09:30 PM]


newbie bear field dressing and hide by Sliverslinger
[Yesterday at 10:14:02 AM]


1 week till bear killin time! by Sliverslinger
[Yesterday at 10:12:07 AM]


Son drawn - Silver Dollar Youth Any Elk - Help? by muleburger
[Yesterday at 09:54:03 AM]


wyoming pronghorn draw by dagon
[Yesterday at 08:59:21 AM]


Stealth Cam QV20 by Kingofthemountain83
[July 25, 2025, 07:42:11 PM]


Taxidermy Issues....HELP! by Magnum_Willys
[July 25, 2025, 04:38:49 PM]


2025 Canning by 3boys
[July 25, 2025, 02:51:04 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal