Best product for black plastic turning white on rigs?

[carpsniperg2]

So what's the best stuff to use to bring the black back out of plastic that fading and turning white?

I am sure someone has been through this before and might have some recommendations?

[HUNTINCOUPLE]

Mother's. Back to Black.

And or replace plastic with new and treat.

[huntnfmly]

Mother's. Back to Black.

And or replace plastic with new and treat.

 
It works great and they also have a spray now for bigger areas like fender wells

[JJJ]

I use ceramic wax on my paint AND black plastic. It seems to hold up much better than  Mother's Back to Black for me....

[dreadi]

The best product for your application is Cerakote Trim Coat

https://www.amazon.com/dp/B07SHJVK4G/ref=cm_sw_r_cp_api_glt_i_JFJ27JEWZE7843J1CRQW

Unlike everything else, this is made to restore the finish on oxidized plastics and last for a long time. It doesn’t wash off with a trips to Brown Bear. It’s a semi permanent product that will last most people a couple years at the least.


BLACK HAMMER ARMS
Type 07 Class 2 NFA Dealer
http://www.blackhammerarms.com
https://www.Silencershop.com/blackhammerarms
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms
GLOCK Certified Armourer

[carpsniperg2]

Thanks guys

The best product for your application is Cerakote Trim Coat

https://www.amazon.com/dp/B07SHJVK4G/ref=cm_sw_r_cp_api_glt_i_JFJ27JEWZE7843J1CRQW

Unlike everything else, this is made to restore the finish on oxidized plastics and last for a long time. It doesn’t wash off with a trips to Brown Bear. It’s a semi permanent product that will last most people a couple years at the least.


BLACK HAMMER ARMS
Type 07 Class 2 NFA Dealer
http://www.blackhammerarms.com
https://www.Silencershop.com/blackhammerarms
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms
GLOCK Certified Armourer

Will this hurt paint if you get it on it? I see it says corrosive so that would be my only worry is getting it on paint and messing the paint up when rubbing the plastic trim.

[dreadi]

Thanks guys

The best product for your application is Cerakote Trim Coat

https://www.amazon.com/dp/B07SHJVK4G/ref=cm_sw_r_cp_api_glt_i_JFJ27JEWZE7843J1CRQW

Unlike everything else, this is made to restore the finish on oxidized plastics and last for a long time. It doesn’t wash off with a trips to Brown Bear. It’s a semi permanent product that will last most people a couple years at the least.


BLACK HAMMER ARMS
Type 07 Class 2 NFA Dealer
http://www.blackhammerarms.com
https://www.Silencershop.com/blackhammerarms
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms
GLOCK Certified Armourer

Will this hurt paint if you get it on it? I see it says corrosive so that would be my only worry is getting it on paint and messing the paint up when rubbing the plastic trim.

I can’t speak to how anyone’s paint will react to this product. I will say though, if your painted parts are rubbing on anything, that rubbing area will have wear without regard to any other products.

Also, just the same as their lens restoration kits and other mfg restoration kits, if getting it on paint is a concern, that area should be cleaned and masked during the prep.


BLACK HAMMER ARMS
Type 07 Class 2 NFA Dealer
http://www.blackhammerarms.com
https://www.Silencershop.com/blackhammerarms
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms
GLOCK Certified Armourer

[carpsniperg2]

Yeah understand it’s not rubbing but where the fender meets with side of the rig is the spot that I was talking about. So masking it should work if I go that route.

Thanks

[HUNTINCOUPLE]

The best product for your application is Cerakote Trim Coat

https://www.amazon.com/dp/B07SHJVK4G/ref=cm_sw_r_cp_api_glt_i_JFJ27JEWZE7843J1CRQW

Unlike everything else, this is made to restore the finish on oxidized plastics and last for a long time. It doesn’t wash off with a trips to Brown Bear. It’s a semi permanent product that will last most people a couple years at the least.


BLACK HAMMER ARMS
Type 07 Class 2 NFA Dealer
http://www.blackhammerarms.com
https://www.Silencershop.com/blackhammerarms
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms
GLOCK Certified Armourer

Gotta love HW! This looks to be way better than Back to Black. We shall wait for Carps results?

[deerlick]

use a heat gun over the area, this typically works great

[MtnMuley]

I'll 3rd the Mothers Back to Black.

[huntandjeep]

For the fender flairs on your Jeep ? Use a Mapp torch . Just did my buddies a few weeks ago . Works great , and you can touch it up whenever. 

[carpsniperg2]

Just watched a few vids that's awesome! Next time I am trying mapp torch for sure!

I ordered the cerekote already.

[Angry Perch]

Way back in my detailing days we used brake fluid!

[Stein]

This guy has the most legit tests I've seen.  Here are the trim ones, he does paint coatings as well.

https://www.youtube.com/results?search_query=scott+hd+detailing+trim