collapse

Advertisement


Author Topic: Best way to measure powder?  (Read 2679 times)

Offline cjc23

  • Trade Count: (+4)
  • Tracker
  • **
  • Join Date: Sep 2017
  • Posts: 73
  • Groups: RMEF, NRA, Ducks Unlimited
Best way to measure powder?
« on: January 01, 2023, 05:29:10 PM »
Looking for a way to up my reloading, currently running the hornady poweder throw, trickler and scale (all of the items that come in the lock n load kit). My question is does it make more sense to go to an autotrickler set up like the RCBS chargemaster or should I just continue what I'm doing with some nicer equipment and upgrade my scale and trickler? All advice welcome!

Offline hughjorgan

  • Political & Covid-19 Topics
  • Trade Count: (+4)
  • Sourdough
  • *****
  • Join Date: Jan 2010
  • Posts: 2421
  • Location: Wilbur
Re: Best way to measure powder?
« Reply #1 on: January 01, 2023, 05:45:47 PM »
I found that that the charge master was more efficient for me.

Offline jrebel

  • Non-Hunting Topics
  • Trade Count: (+24)
  • Explorer
  • ******
  • Join Date: Feb 2008
  • Posts: 11347
  • Location: East Wenatchee
Re: Best way to measure powder?
« Reply #2 on: January 01, 2023, 05:57:55 PM »
Switched to an electronic powder throw about 10 years ago and will never look back.  I keep the manual throws for backup....but can't see ever using them again.  I now own two electronic throws / scales....1 RCBS chargemaster and 1 lyman gen 6.  I really like the chargemaster the best now that RCBS has worked out all the bugs of old. 


Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31528
  • Location: Goldendale,WA
Re: Best way to measure powder?
« Reply #3 on: January 01, 2023, 06:02:03 PM »
Charge master will for sure pick up the pace. If you got the spare cheddar, run 2 of them side by side and that will pick the pace up fast! Just make sure your scale pans are identical and cross check them so you don’t get any flux between loads.
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline NRA4LIFE

  • Site Sponsor
  • Past Sponsor
  • Trade Count: (+10)
  • Old Salt
  • *****
  • Join Date: Nov 2007
  • Posts: 6057
  • Location: Maple Valley
  • Groups: NRA
Re: Best way to measure powder?
« Reply #4 on: January 01, 2023, 07:12:19 PM »
Switched to an electronic powder throw about 10 years ago and will never look back.  I keep the manual throws for backup....but can't see ever using them again.  I now own two electronic throws / scales....1 RCBS chargemaster and 1 lyman gen 6.  I really like the chargemaster the best now that RCBS has worked out all the bugs of old.

Do this.  It helps big time when reloading .223 and the likes.  I know Jrebel loves reloading those.
« Last Edit: January 01, 2023, 07:19:35 PM by NRA4LIFE »
Look man, some times you just gotta roll the dice

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 12975
  • Location: Arlington
Re: Best way to measure powder?
« Reply #5 on: January 01, 2023, 07:28:11 PM »
Depending on what "up my game" means.  An electronic measure will certainly speed things up.  A scale and hand trickle will be more consistent but much slower.

Offline Buckjunkie

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Oct 2010
  • Posts: 756
  • Groups: USMC Vet, NRA Life Member, SCI Life Member, WAFNAWS Life Member
Re: Best way to measure powder?
« Reply #6 on: January 01, 2023, 07:46:42 PM »
I’m on my 2nd Chargemaster. I just bought the Lite model about a year ago after the one I had for 20+ years started doing some weird stuff. I researched all of them and decided to go with RCBS again. I tested it against my friend’s A & D Precision Balance and they read the same. I would suggest plugging in the RCBS Lite 30 minutes before use. Some on-line reports have said the scale will run a couple tenths up and down until it’s warm.


Offline Karl Blanchard

  • Trade Count: (+24)
  • Explorer
  • ******
  • Join Date: Aug 2008
  • Posts: 10675
  • Location: Selah, WA
  • Jonathan_S hunting apparel prostaff
  • Groups: Sitka Gear Fan Boy for LIFE
Re: Best way to measure powder?
« Reply #7 on: January 01, 2023, 08:47:34 PM »
I use 3 charge master. Once you recalibrate their throw speeds and do the McDonald's straws in the powder tubes they just rock and roll. Had a Hornady years ago and it was fine but the charge masters are faster and more accurate.  I used to hand check throws from time to time on a beam scale but it proved pointless.
It is foolish and wrong to mourn these men.  Rather, we should thank god that such men lived.  -General George S. Patton

Aaron's Profile:  http://hunting-washington.com/smf/index.php?action=profile;u=2875
Aaron's Posts:  http://hunting-washington.com/smf/index.php?action=profile;area=showposts;u=2875
Aaron's Facebook:  https://www.facebook.com/aaron.blanchard.94

Offline craigapphunt

  • Trade Count: (+3)
  • Hunter
  • ***
  • Join Date: Jul 2015
  • Posts: 171
  • Location: centralia, wa
Re: Best way to measure powder?
« Reply #8 on: January 01, 2023, 09:29:20 PM »
Chargemaster for me. Ran Lee scoops and a beam scale for a while then a mechanical thrower with a trickler but once I went electric I couldn't  imagine going back.

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5603
Re: Best way to measure powder?
« Reply #9 on: January 01, 2023, 09:54:47 PM »
Best way is Autotrickler or Supertrickler.   

I used to use Chargemaster set low then weigh on a FX-120i lab scale and add kernals with  tweezer as needed.  Worked but slow.  Switched to autotrickler now have powder to the single kernal each time in 13 seconds.   By the time I seat new one is ready
« Last Edit: January 01, 2023, 10:40:03 PM by Magnum_Willys »

Offline hogslayer

  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Dec 2012
  • Posts: 818
  • Location: Snoqualmie-Belfair
  • Groups: Bloody decks
Re: Best way to measure powder?
« Reply #10 on: January 01, 2023, 09:59:07 PM »
What Magnum said. Same setup.  Cost some money but it works the best.

Offline M_ray

  • Non-Hunting Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Oct 2007
  • Posts: 4598
  • Location: I'm takin the 5th on this one
Re: Best way to measure powder?
« Reply #11 on: January 01, 2023, 11:29:30 PM »
I use Lyman gen 6, used to manually check it every few charges but it was always right on I don’t bother anymore.
DISCLAIMER: The opinions expressed here are not those of HW Management, Admins, Mods or Myself... But they are the opinions of Elvis who has revealed them to me through the medium of my pet hamster, Lee Harvey Oswald...


MB

Growing old is mandatory ... Growing up is optional!

Offline Wanttohuntmore

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1958
Re: Best way to measure powder?
« Reply #12 on: January 02, 2023, 08:53:56 AM »
I use the electronic Lyman for the big kernel powders,  and use the volume thrower for ball powders in 223, and some 308 case based loads.   Been doing so for 15 years and won't go back.   Saves so much time and less stress.

Offline JohnVH

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2011
  • Posts: 1987
  • Location: PNW
Re: Best way to measure powder?
« Reply #13 on: January 02, 2023, 09:00:46 AM »
3 years ago I got an RCBS Chargemaster lite, talk about a game changer on speed! One of the best reloading tools Ive bought.

Online timberfaller

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Mar 2014
  • Posts: 4170
  • Location: East Wenatchee
Re: Best way to measure powder?
« Reply #14 on: January 02, 2023, 09:20:32 AM »
Redding powder measure and a RCBS hand trickler with a RCBS 10-10 scales.  Hasn't failed me yet!  Only use a digital when I check shotgun loading bushings.  Life is good!!
The only good tree, is a stump!

 


* Advertisement

* Recent Topics

AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by redi
[Today at 03:54:29 PM]


Looking for Solid 22 LR input by EnglishSetter
[Today at 03:13:54 PM]


WSTA 2025 Summer Rendezvous Agenda by Humptulips
[Today at 03:09:35 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by rainshadow1
[Today at 03:01:42 PM]


2025 Montana alternate list by JBar
[Today at 02:20:40 PM]


Rotator Cuff repair X 2 advice needed by Wood2Sawdust
[Today at 01:36:26 PM]


Rock creek gone? Next? by JBar
[Today at 01:00:56 PM]


Archery elk gear, 2025. by pcveen
[Today at 09:35:38 AM]


2025 Canning by blackpowderhunter
[Today at 07:19:25 AM]


Lynx kittens confirmed in the Kettle Range by dwils233
[Today at 12:04:14 AM]


How To Get Your $0.00 Tax Stamp - Black Hammer Arms by dreadi
[Yesterday at 11:33:25 PM]


Seeking recommendations on a new scope by Klickitatsteelie
[Yesterday at 09:23:56 PM]


First attempt at polish sausages by Stein
[Yesterday at 07:58:22 PM]


Sockeye Numbers by Southpole
[Yesterday at 07:44:30 PM]


Best all around muzzy (updated) by jjhunter
[Yesterday at 07:44:26 PM]


38% increase in fishing and hunting licenses by Sitka_Blacktail
[Yesterday at 07:02:41 PM]


50 inch SXS and Tracks? by 92xj
[Yesterday at 05:34:03 PM]


3 days for Kings by MADMAX
[Yesterday at 05:06:49 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal