collapse

Advertisement


Author Topic: Powder Problem???  (Read 2873 times)

Offline colockumelk

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jan 2009
  • Posts: 4910
  • Location: Watertown, NY
Powder Problem???
« on: June 11, 2009, 11:07:55 AM »
I recently purched American Pioneer  powder in pellet form.  I use Musket Caps for a primer.  Anyways I shot 6 shots using those pellets and two of those I only had a partial burn.  I know this because it only kicked like a .22 and on one of those shots the second pellet didn't ignite until about 50yds out (WHICH WAS FREAKING COOL LOOKING)

So my question is has anyone tried this stuff in the pellet form and had the same thing happen to them?  Did I just have bad luck?  It doesn't say anywhere on the bottle that 209 primers are preferred.  As of now I am switching back to the loose powder form.  But would like to use the pellets for the wife since it's easier to use.

Any help would be appreciated. 
"We Sleep Safe In Our Beds because rough men stand ready in the night to visit violence on those that would do us harm."
Author: George Orwell

Offline whacker1

  • Trade Count: (+3)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 5816
  • Location: Spokane
Re: Powder Problem???
« Reply #1 on: June 11, 2009, 11:24:58 AM »
I think those pellets are designed to be fired with .209 primers.  I don't think your musket caps are hot enough for these pellets.

I think you can shoot American Pioneer "loose" powder with #11 and musket caps. 

Offline buckhorn2

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jul 2008
  • Posts: 3511
  • Location: grayland wa.
Re: Powder Problem???
« Reply #2 on: June 11, 2009, 11:25:51 AM »
I tried it in my muzzleloader and could;nt get it to shoot very good groups some sounded louder than others. I went back to 777  again. I was told you want to buy the Jim Shockey Gold in the pioneer powder it is way better.

Offline sparksbr

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2009
  • Posts: 64
  • Location: Central Washington University
Re: Powder Problem???
« Reply #3 on: June 11, 2009, 11:26:21 AM »
I think it boils down to ignition, or lack there of...

No. 11's and musket caps just don't build the heat that is required to efficiently ignite the pellets.

Have you tried the standard pyrodex pellets?

Offline Blsum

  • WA State Trappers Association
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Nov 2007
  • Posts: 738
  • Location: Shelton Wa
Re: Powder Problem???
« Reply #4 on: June 11, 2009, 06:11:40 PM »
Sounds a lot like the problem we where having with the 777 pellets  :dunno: Come to find out you should only use 209 with the 777 pellets. We switched to the loose powder and our grouping got way tighter and the gun worked just fine. I was shooting 777 pellets out of my bighorn and using a hornady sst bullet. we looked at the target and you could see where the bullet went through the target sideways. We even pulled one of the bullets out of the stump and sure enough it was facing us. I've neer had a problem shooting the pyrodex pellets out of my gun's. It might be a little dirtier but they get the job done.   :twocents:
It's not the size of the trophy that make's it a trophy.

You may just be one person in this world. But you may be the world to just one person.

Offline colockumelk

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jan 2009
  • Posts: 4910
  • Location: Watertown, NY
Re: Powder Problem???
« Reply #5 on: June 11, 2009, 09:54:36 PM »
Last year I shot 100 grains of pyrodex pellets pushing a 250 grain Ballistic tip and had excellant groups.  I wanted to try a cleaner shot this year so bought Jim Shockeys gold loose for me and the Jim Shockeys gold pellets for the wife.

I think you are all right that they do need 209 primers.  It doesn't say on the bottle but 1 my groups were awful and seeing the second pellet ignite 50 yds out (while it was cool) sucked.  My groups with the loose are not as good as last year with the pyrodex but it is the first time I went out this year so we'll see.  I may have to go back.  I'd rather have a dirty accurate gun than a clean innaccurate one.

Until now I thought maybe I'd done something wrong.  Thanks again. 
"We Sleep Safe In Our Beds because rough men stand ready in the night to visit violence on those that would do us harm."
Author: George Orwell

 


* Advertisement

* Recent Topics

What boots? by dreadi
[Yesterday at 10:27:55 PM]


Thanksgiving duck hunt by high_hunter
[Yesterday at 10:22:28 PM]


GMU 111 antlered moose advice request by teanawayslayer
[Yesterday at 10:20:12 PM]


CWD test results 🤤🤫 by Limhangerslayer
[Yesterday at 10:20:06 PM]


Big J's Black Friday sale by highside74
[Yesterday at 10:11:04 PM]


Illinois, No Doubter by hunter399
[Yesterday at 09:42:35 PM]


Wowzers by dvolmer
[Yesterday at 09:23:19 PM]


Pepper Jack tillimook by hunter399
[Yesterday at 09:21:18 PM]


Eastern Washington Late Archery by hunter399
[Yesterday at 09:03:59 PM]


Aladdin unit 111 mule deer quality tag by jrebel
[Yesterday at 09:00:57 PM]


Hunting with a suppressor - dumb idea? by JohnVH
[Yesterday at 08:07:47 PM]


Canning Wild Game by WoolyRunner
[Yesterday at 07:56:27 PM]


Pants for wet brush? by EnglishSetter
[Yesterday at 07:47:07 PM]


Sturgeon Set-ups by Limhangerslayer
[Yesterday at 07:41:23 PM]


2025 OILS! by crabcreekhunter
[Yesterday at 07:01:01 PM]


Xlr element vs mdt hnt26 by Antlershed
[Yesterday at 05:48:11 PM]


Drew Pogue Quality by Tball77
[Yesterday at 05:40:59 PM]


Late Alta Muzzy by Schmalzfam
[Yesterday at 04:26:02 PM]


My Entiat Late tag thread by Mfowl
[Yesterday at 03:15:40 PM]


2025 blacktail rut thread by Kingofthemountain83
[Yesterday at 02:47:12 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal