collapse

Advertisement


Author Topic: Powder Problem???  (Read 2878 times)

Offline colockumelk

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jan 2009
  • Posts: 4910
  • Location: Watertown, NY
Powder Problem???
« on: June 11, 2009, 11:07:55 AM »
I recently purched American Pioneer  powder in pellet form.  I use Musket Caps for a primer.  Anyways I shot 6 shots using those pellets and two of those I only had a partial burn.  I know this because it only kicked like a .22 and on one of those shots the second pellet didn't ignite until about 50yds out (WHICH WAS FREAKING COOL LOOKING)

So my question is has anyone tried this stuff in the pellet form and had the same thing happen to them?  Did I just have bad luck?  It doesn't say anywhere on the bottle that 209 primers are preferred.  As of now I am switching back to the loose powder form.  But would like to use the pellets for the wife since it's easier to use.

Any help would be appreciated. 
"We Sleep Safe In Our Beds because rough men stand ready in the night to visit violence on those that would do us harm."
Author: George Orwell

Offline whacker1

  • Trade Count: (+3)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 5816
  • Location: Spokane
Re: Powder Problem???
« Reply #1 on: June 11, 2009, 11:24:58 AM »
I think those pellets are designed to be fired with .209 primers.  I don't think your musket caps are hot enough for these pellets.

I think you can shoot American Pioneer "loose" powder with #11 and musket caps. 

Offline buckhorn2

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jul 2008
  • Posts: 3511
  • Location: grayland wa.
Re: Powder Problem???
« Reply #2 on: June 11, 2009, 11:25:51 AM »
I tried it in my muzzleloader and could;nt get it to shoot very good groups some sounded louder than others. I went back to 777  again. I was told you want to buy the Jim Shockey Gold in the pioneer powder it is way better.

Offline sparksbr

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2009
  • Posts: 64
  • Location: Central Washington University
Re: Powder Problem???
« Reply #3 on: June 11, 2009, 11:26:21 AM »
I think it boils down to ignition, or lack there of...

No. 11's and musket caps just don't build the heat that is required to efficiently ignite the pellets.

Have you tried the standard pyrodex pellets?

Offline Blsum

  • WA State Trappers Association
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Nov 2007
  • Posts: 738
  • Location: Shelton Wa
Re: Powder Problem???
« Reply #4 on: June 11, 2009, 06:11:40 PM »
Sounds a lot like the problem we where having with the 777 pellets  :dunno: Come to find out you should only use 209 with the 777 pellets. We switched to the loose powder and our grouping got way tighter and the gun worked just fine. I was shooting 777 pellets out of my bighorn and using a hornady sst bullet. we looked at the target and you could see where the bullet went through the target sideways. We even pulled one of the bullets out of the stump and sure enough it was facing us. I've neer had a problem shooting the pyrodex pellets out of my gun's. It might be a little dirtier but they get the job done.   :twocents:
It's not the size of the trophy that make's it a trophy.

You may just be one person in this world. But you may be the world to just one person.

Offline colockumelk

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jan 2009
  • Posts: 4910
  • Location: Watertown, NY
Re: Powder Problem???
« Reply #5 on: June 11, 2009, 09:54:36 PM »
Last year I shot 100 grains of pyrodex pellets pushing a 250 grain Ballistic tip and had excellant groups.  I wanted to try a cleaner shot this year so bought Jim Shockeys gold loose for me and the Jim Shockeys gold pellets for the wife.

I think you are all right that they do need 209 primers.  It doesn't say on the bottle but 1 my groups were awful and seeing the second pellet ignite 50 yds out (while it was cool) sucked.  My groups with the loose are not as good as last year with the pyrodex but it is the first time I went out this year so we'll see.  I may have to go back.  I'd rather have a dirty accurate gun than a clean innaccurate one.

Until now I thought maybe I'd done something wrong.  Thanks again. 
"We Sleep Safe In Our Beds because rough men stand ready in the night to visit violence on those that would do us harm."
Author: George Orwell

 


* Advertisement

* Recent Topics

Any beaver trappers in the Nile area? by ASHQUACK
[Today at 03:04:05 PM]


Perfect evening hunt by Pathfinder101
[Today at 03:01:54 PM]


Long distance love affair by Pathfinder101
[Today at 02:59:41 PM]


Old recessed buck by Pathfinder101
[Today at 02:57:52 PM]


Slick 4 by Pathfinder101
[Today at 02:55:57 PM]


My wife found her first shed by boneaddict
[Today at 02:33:59 PM]


Real world feedback needed: Rangefinder Binos by CarbonHunter
[Today at 02:07:30 PM]


Late season in gods Country My big buck by pianoman9701
[Today at 01:59:28 PM]


Older SxS shotgun by salish
[Today at 12:20:12 PM]


Best service for estimating draw odds by Bob33
[Today at 11:35:23 AM]


Beavertail 1800??? by BD1
[Today at 10:58:07 AM]


What pond creature am I dealing with here? by pianoman9701
[Today at 10:38:01 AM]


WA Bucket List….Mule Deer Permit by HikerHunter
[Today at 09:33:47 AM]


Cowichie muzzy bull this year by buglebuster
[Today at 09:06:47 AM]


High n Dry gear by metlhead
[Today at 06:26:26 AM]


Colockum WMA chukar hunting by metlhead
[Today at 06:19:26 AM]


Selkirk bull moose. by trophyhunt
[Today at 04:29:19 AM]


The Okanogan Deer Book by JDHasty
[Yesterday at 09:20:53 PM]


Idaho deer question by Tbob
[Yesterday at 08:20:43 PM]


2025 elk success thread!! by 10thmountainarcher
[Yesterday at 07:21:33 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal