collapse

Advertisement


Author Topic: Outfitting boat with new outboard max horsepower  (Read 7372 times)

Offline millerwheeler

  • Trade Count: (+4)
  • Sourdough
  • *****
  • Join Date: Jun 2014
  • Posts: 1493
  • Location: Spanaway
  • Get out and put some miles on those boots
Outfitting boat with new outboard max horsepower
« on: May 06, 2024, 04:01:03 PM »
Got a 16.5 foot older blue fin boat (aluminum ) sold my boat during Covid and pick up if for a great deal it’s completely open  I put one pedestal seat in and boys sit in camping chairs for now it’s rated for a 90hp I wanna stick with a tiller motor and I got it with no motor  had a 30etec sitting and with 2 adults and very little gear gets ya up on a plain . I plain on pulling floor refoaming and setting up boat better this winter

My question is as I redo it . Max hp is 90hp and I feel like I should  set it up  at that just so I never a worry about hauling gear or worrying about being under powered. Lots of tiller options out there but lookin for opinions

Offline JBG

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: May 2010
  • Posts: 305
Re: Outfitting boat with new outboard max horsepower
« Reply #1 on: May 06, 2024, 04:18:33 PM »
If your budget permits then send it.  I had a 115 jet (so 30% loss due to jet) on a 17 ft heavy gauge welded North River Scout that pushed it along just fine.  I think a 90 with a prop will be plenty.  I would say 50 - 60HP would be the workable budget friendly option if your not looking to break the bank.

Offline GWP

  • Forum Sponsor
  • Trade Count: (+26)
  • Sourdough
  • *****
  • Join Date: Dec 2010
  • Posts: 1763
  • Location: Big Sandy-By Westport
Re: Outfitting boat with new outboard max horsepower
« Reply #2 on: May 06, 2024, 04:34:32 PM »
My last boat had a smallish outboard (40 on a 16’) for the weight. Found with 3 bigger guys and gear it would not get on the step. I put on a ‘Piranha Prop’ and while I lost a few top end mph it would get on the step and had a better hole shot even loaded down. I really liked what a gas sipper it was. Since I was using it 95% by myself it worked fine the vast majority of the time.
Changed to a different boat with 4 times the HP (175 on a 19’) and promptly ran it out of gas because the gauge did not read accurately and it sucks WAY more fuel. About twice the speed (could prop it for more) than the other one had, but that was not really why I bought it.
If I had it to do over I would stick with the lower HP powered boat and fill it up once a year instead of every other time I go out. The power is nice at times, but not for the fuel consumption trade off.
Cuterebra are NOT cute!

Offline fishngamereaper

  • Trade Count: (+7)
  • Old Salt
  • ******
  • Join Date: Oct 2011
  • Posts: 8769
  • Location: kitsap
Re: Outfitting boat with new outboard max horsepower
« Reply #3 on: May 06, 2024, 04:38:03 PM »
You'll be pleased with a 60. 4 stroke Yamaha or Zuk for efficiency and weight.

Offline millerwheeler

  • Trade Count: (+4)
  • Sourdough
  • *****
  • Join Date: Jun 2014
  • Posts: 1493
  • Location: Spanaway
  • Get out and put some miles on those boots
Re: Outfitting boat with new outboard max horsepower
« Reply #4 on: May 06, 2024, 04:39:34 PM »
Appreciate the advice on trade off as far as fuel goes , and as well as go with what the budget allows , I don’t want  it to be a slug either , might weigh it now. With average gear , then when I refoam , build a storage option or 2 reweigh and see the  difference. I  definitely want to stick with tiller as there is so much more room

Offline fishngamereaper

  • Trade Count: (+7)
  • Old Salt
  • ******
  • Join Date: Oct 2011
  • Posts: 8769
  • Location: kitsap
Re: Outfitting boat with new outboard max horsepower
« Reply #5 on: May 06, 2024, 04:51:30 PM »
I ran a 16.9 hewescraft for years with a 60 on it.
Took it 50 miles of of Westport for tuna. 30 miles out of neah for halibut.
Great fuel range and enough power for 3 adults and gear.  Would a 90 been better. Probably but the 60 was a workhorse..

Offline millerwheeler

  • Trade Count: (+4)
  • Sourdough
  • *****
  • Join Date: Jun 2014
  • Posts: 1493
  • Location: Spanaway
  • Get out and put some miles on those boots
Re: Outfitting boat with new outboard max horsepower
« Reply #6 on: May 06, 2024, 05:08:22 PM »
I ran a 16.9 hewescraft for years with a 60 on it.
Took it 50 miles of of Westport for tuna. 30 miles out of neah for halibut.
Great fuel range and enough power for 3 adults and gear.  Would a 90 been better. Probably but the 60 was a workhorse..


Thank you for the advice I appreciate it !

Offline trophyhunt

  • Forum Sponsor
  • Trade Count: (+11)
  • Explorer
  • *****
  • Join Date: Nov 2008
  • Posts: 19710
  • Location: Wetside
  • Groups: Wa Wild Sheep Life Member
Re: Outfitting boat with new outboard max horsepower
« Reply #7 on: May 06, 2024, 05:35:01 PM »
Yamaha all the way!!
“In common with”..... not so much!!

Offline SeaRun1

  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Dec 2008
  • Posts: 759
  • Location: Kitsap Peninsula
Re: Outfitting boat with new outboard max horsepower
« Reply #8 on: May 06, 2024, 05:41:40 PM »
Always put the most hp you can put on a boat.  No one ever regrets having more horse power.  Been through this before as well as many friends.  Get a 90 Yamaha or Honda and enjoy!

SR1

Offline Crunchy

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4970
  • Location: Puyallup
Re: Outfitting boat with new outboard max horsepower
« Reply #9 on: May 06, 2024, 05:47:07 PM »
My old boat was rated for a 115hp but had a 90hp Honda and matching 8hp Honda kicker.  The 90 was plenty for the 18ft Hewescraft. Although I would have liked more speed it sat in the water fairly stern heavy.  My new boat is rated for 250hp but has a 200hp Yamaha with a matching 9.9hp kicker.  The 200 is perfectly fine with me.  The Honda's seem a bit quieter but definite difference in size.  The Honda kicker seemed a bit smoother as well.  If it were me I would get something close to max rating and call it good.  No matter what motor you put on it you will always want to go faster.

Offline BD1

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2011
  • Posts: 1605
  • Location: Snohomish County
Re: Outfitting boat with new outboard max horsepower
« Reply #10 on: May 06, 2024, 06:35:59 PM »
I just bought a 1860 Lowe Roughneck. I opted for the 60 hp Merc. We just finished up with the break in process and I love the motor. It is a tiller setup so yeah it is certainly bigger than the 25 hp on my last boat. There was only about 40+ pound difference between that and the 40hp that is the stock option. The bout weighs about 670#. It is a very powerful motor. I won't debate motor makes on here...they have all come a long way since I last had one. It flies. I do have the rear pods on the boat which helps with the weight of the motor. Good luck with the project.

Offline trophyhunt

  • Forum Sponsor
  • Trade Count: (+11)
  • Explorer
  • *****
  • Join Date: Nov 2008
  • Posts: 19710
  • Location: Wetside
  • Groups: Wa Wild Sheep Life Member
Re: Outfitting boat with new outboard max horsepower
« Reply #11 on: May 07, 2024, 04:54:44 AM »
Well since you won’t debate boat motors, I won’t ask what makes people choose something other than a Yamaha or Honda??  🤣🤣. 
“In common with”..... not so much!!

Offline hiway_99

  • Business Sponsor
  • Trade Count: (+9)
  • Scout
  • *****
  • Join Date: Mar 2011
  • Posts: 466
  • Location: Seabeck
    • https://m.facebook.com/100088313187853/
Re: Outfitting boat with new outboard max horsepower
« Reply #12 on: May 07, 2024, 05:58:19 AM »
If your boat is older then the it was probably rated for a 2 stroke which are lighter then today's 4 stroke engines.  For example a yamaha 70hp outboard weighs 253 lbs and a yamaha 75 horse weighs 353 lbs.  I would be more concerned with how much weight you add to the transom then horse power.  My suggestion is the yamaha 70 horse.

Sent from my SM-S918U using Tapatalk


Offline jeffitz

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 339
  • Location: SW WA
Re: Outfitting boat with new outboard max horsepower
« Reply #13 on: May 07, 2024, 06:00:06 AM »
I must be diverse- Honda main and Yamaha kicker on my boat - love em both
If you're gonna be dumb,you gotta be tough.

Offline hiway_99

  • Business Sponsor
  • Trade Count: (+9)
  • Scout
  • *****
  • Join Date: Mar 2011
  • Posts: 466
  • Location: Seabeck
    • https://m.facebook.com/100088313187853/
Re: Outfitting boat with new outboard max horsepower
« Reply #14 on: May 07, 2024, 06:16:18 AM »
I must be diverse- Honda main and Yamaha kicker on my boat - love em both
Honda makes great outboards.  But the honda bf75 weighs 359 lbs.  That's a lot of weight on the transom of a 16' boat.

Sent from my SM-S918U using Tapatalk


 


* Advertisement

* Recent Topics

Opening morning by Goshawk
[Today at 09:23:07 AM]


Best 20 degree and under sleeping bags? by Ricochet
[Today at 08:24:08 AM]


KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Today at 08:21:31 AM]


Get out the Band-Aids and streri strips by chukarchaser
[Today at 08:09:27 AM]


Montana general deer by andrew_in_idaho
[Today at 08:01:26 AM]


Any Rec Tec users here ? by BA Mongor
[Today at 07:43:22 AM]


Happy opening day! by Bearhunter308
[Yesterday at 10:43:37 PM]


Bowfishing on the Snake River by Machias
[Yesterday at 09:11:19 PM]


Mamma's and babies by Brute
[Yesterday at 08:38:48 PM]


Pinks! by Stein
[Yesterday at 08:20:08 PM]


Rats in RV roof by Ghost Hunter
[Yesterday at 07:37:01 PM]


Muckleshoot/white river forest hunting permits by bigtex
[Yesterday at 05:21:47 PM]


Looks like it may get wet by ghosthunter
[Yesterday at 04:46:17 PM]


Bait punishment? by hdshot
[Yesterday at 04:35:54 PM]


small bears by Threewolves
[Yesterday at 02:59:35 PM]


Montana Antelope Draw by Jimmy33
[Yesterday at 02:41:41 PM]


Pork belly street tacos….. by jrebel
[Yesterday at 10:03:22 AM]


Willapa Hills 1 Bear by 7t9cobra
[Yesterday at 08:39:53 AM]


M1 garand info needed by Farmer72
[Yesterday at 07:35:34 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal