need advice for peeps

[zpoolman]

OK I'm getting old my 1/8" peep isn't letting in enough light in low light for the old eyes. any suggestions?   The sight I use is the spot hog sdp.    Thanks all

[yajsab]

get a bigger one.  3/16 or 1/4.

[alwinearcher]

get a bigger one.  3/16 or 1/4.

yep, with that SDP sight the white ring around it should fit perfectly inside a 1/4" peep with a average draw (28" 29") or a 3/16 would prob work good if you have a longer draw (30" 31") All depending on how far your peep is from your eye.

[Crunchy]

I prefer 3/16, not sure if 1/4 would be too big for my liking.

[coldsteel3d]

I went with a 1/4", and it ended up being a little too big so I down sized to a 3/16" and it's perfect.

[Todd_ID]

I use the 1/4" one from R.A.D. peeps.  It's a great product and is made here in Washington by a lifelong bowhunter.

[halflife65]

I went with a 1/4", and it ended up being a little too big so I down sized to a 3/16" and it's perfect.

Same thing for me - I have the SDP and it's perfect at that size - 28.5" draw length.

[konrad]

My Truth has a 31 inch axle-to-axle length and the string angle means its further from my eye. I also shoot a Hogg It sight and not only drilled out my 1/4 inch sight to "As Big As Was Safe" but also added two inches in sight bar length (8 now).

I still have to make sure I can see the entire sight housing during the building of my "picture".

Size...whatever works!