collapse

Advertisement


Author Topic: Weatherby Mark V stock question  (Read 9398 times)

Offline bobcat

  • Global Moderator
  • Trade Count: (+14)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 39206
  • Location: Rochester
    • robert68
Re: Weatherby Mark V stock question
« Reply #15 on: February 13, 2010, 07:50:49 PM »
What if someone wanted to remove the recoil pad so they could cut a half inch off the stock, and then reinstall the recoil pad? 

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Weatherby Mark V stock question
« Reply #16 on: February 13, 2010, 07:59:16 PM »
if your wby is out of the 60'2 and the 257 is late model there is a chance the inletting is different. I do not recall the differences as I have not dabbled with old wby's. a word of advice, if the gun is in reasonable shape, DO NOT ALTER IT. the simplest stock mod could affect the value in a huge way. if you need to trim a stock, get another one to trim. also be careful of limbsaver pads on big kickers and short eye relief scopes......you might get a surprise.

Offline Huntbear

  • I am a BAD Kitteh
  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2007
  • Posts: 9616
  • Location: Wandering Lost East of the Mountains
  • Y.A.R. Jester aka Smart Ass
    • http://www.facebook.com/profile.php?id=1236486665
Re: Weatherby Mark V stock question
« Reply #17 on: February 13, 2010, 08:05:29 PM »
What if someone wanted to remove the recoil pad so they could cut a half inch off the stock, and then reinstall the recoil pad? 

Then you would have to install a new pad if it is glued on.  Most older recoil pads need to be replaced anyway, either due to rot or just compression from sitting on the recoil pad in safes and closets.
By my honorable conduct as a hunter let me give a good example and teach new hunters principles of honor, so that each new generation can show respect for their god, other hunters and the animals, and enjoy the dignity of the hunt.

Calling an illegal alien an 'undocumented immigrant' is like calling a drug dealer an 'unlicensed pharmacist'.

Offline Pathfinder101

  • The Chosen YAR
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jan 2009
  • Posts: 12181
  • Location: Southeast WA
  • Semper Primus
Re: Weatherby Mark V stock question
« Reply #18 on: February 14, 2010, 08:36:24 AM »
if your wby is out of the 60'2 and the 257 is late model there is a chance the inletting is different. I do not recall the differences as I have not dabbled with old wby's. a word of advice, if the gun is in reasonable shape, DO NOT ALTER IT. the simplest stock mod could affect the value in a huge way. if you need to trim a stock, get another one to trim. also be careful of limbsaver pads on big kickers and short eye relief scopes......you might get a surprise.

I actually have 2 older Weatherbys that I inherited from my dad.  One is an older post-WWII model that Roy Weatherby used to build off old beefed up Mauser actions.  It's probably 1950's vintage.  I saw one in Cabelas Gun Library the other day for about $2,000.00.  That one stays locked up, and I don't shoot it.
The other one (the one I am probably going to restock) is one he bought new in the late '60s, after Roy invented the Mark V action.  It appears to be no different than the Mark Vs that Weatherby makes today.
I don't plan to alter it, since, as you said, it will affect the value.  That's why I want to replace the stock with a synthetic and a good recoil pad and hunt with it.  I'll put the walnut stock (it really is gorgeous) away for safekeeping, intact.
Before you criticize someone, you should walk a mile in their shoes.  That way, when you criticize them, you're a mile away and you have their shoes.

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Weatherby Mark V stock question
« Reply #19 on: February 14, 2010, 08:51:25 AM »
good plan. If I am not mistaken there was a run of 6 lug guns that differ from the 9 lugs of today.....just based on heresay, I am admittadly not a wby historian, just hoping to give you all the questions to ask.

Offline Pathfinder101

  • The Chosen YAR
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jan 2009
  • Posts: 12181
  • Location: Southeast WA
  • Semper Primus
Re: Weatherby Mark V stock question
« Reply #20 on: February 14, 2010, 08:53:44 AM »
Thanks for the input guys.   :hello:
Before you criticize someone, you should walk a mile in their shoes.  That way, when you criticize them, you're a mile away and you have their shoes.

 


* Advertisement

* Recent Topics

JES reboring experience by BigGoonTuna
[Today at 04:11:40 AM]


New record WA shiras by huntnnw
[Yesterday at 09:43:18 PM]


maybe a shooter by lewy
[Yesterday at 09:37:17 PM]


Winthrop wolves by mountainman
[Yesterday at 09:18:19 PM]


Back country tent suggestions by millerwheeler
[Yesterday at 08:29:16 PM]


From Behind by Kingofthemountain83
[Yesterday at 08:23:08 PM]


Wildlife Obsession Duvall WA Taxidermy Closing its doors by Irish_hunter93
[Yesterday at 07:45:19 PM]


Drew Moose Tag by redi
[Yesterday at 06:57:46 PM]


Western Wa gunsmith by okie john
[Yesterday at 06:02:52 PM]


New bow ideas by blackveltbowhunter
[Yesterday at 04:49:53 PM]


management buck by jstone
[Yesterday at 04:25:35 PM]


PRIME CENTERGY by highside74
[Yesterday at 01:18:39 PM]


Build a 7mm Weatherby mag by Kingofthemountain83
[Yesterday at 12:12:59 PM]


Blueprint for next year by Ghost Hunter
[Yesterday at 11:01:38 AM]


Idaho's new Deer/Elk License System by JakeLand
[Yesterday at 09:35:56 AM]


Idaho Billy by redi
[Yesterday at 08:50:50 AM]


Florida Bear Hunt by kodiak06
[Yesterday at 08:02:25 AM]


Handgun for grouse by hunter399
[Yesterday at 03:16:47 AM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal