collapse

Advertisement


Author Topic: Back to the drawing board...................  (Read 5641 times)

Offline Sagedawg

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Nov 2007
  • Posts: 657
  • Location: Spokane
Back to the drawing board...................
« on: March 12, 2008, 07:50:06 AM »
Well finally got out shooting this week end. Was wanting to work up a load with the Dead Center bullets all with no luck. Started out with 90grs of 777 and a 310 grain bullet.......accuracy sucked dropped down to 85grs  same story. I went back to the tried and true knight sabot under 100grs of 777 and Im right back to a 2-1/2''group at 100 yards. I think Ill just stick to what works. Just wanted to pass the info on. Hope this helps someone.


Sage

Offline wastickslinger

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 2863
  • Location: pluto
Re: Back to the drawing board...................
« Reply #1 on: March 12, 2008, 08:16:32 AM »
2 1/2 inch group at 100 yards with an iron sight smokepole doesn't sound like a problem to me. That would mean 4-6 inch group at your max range. I have never been able to get a tighter group than that with an open sight muzzleloader and I get er done.  :dunno: just my 2 cents.

Offline actionshooter

  • Past Sponsor
  • Trade Count: (+6)
  • Old Salt
  • *****
  • Join Date: Apr 2007
  • Posts: 6043
  • Location: Olympia/Okanogan
    • https://www.instagram.com/steve.bell.actionshooter/
Re: Back to the drawing board...................
« Reply #2 on: March 14, 2008, 05:10:20 PM »
I don't know what kind of rifle your shooting but the knight 310 gr sabots are the best I have ever found for accuracy in a Knight rifle.

Offline Sagedawg

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Nov 2007
  • Posts: 657
  • Location: Spokane
Re: Back to the drawing board...................
« Reply #3 on: March 14, 2008, 06:31:18 PM »
 I shoot a Knight Bighorn. I didnt mean to come across like I had to get better groups. I was just wanting to see what the Dead Center loads were capable of. My gun didnt really care for them ,like you  my most accurate loads are with the Knight sabot. I do this all the time, get somethiung that works and then I try to go out and re-invent the wheel. Most be my wife rubbing off on me   LOL.


Sage

Offline DBake

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Sep 2007
  • Posts: 237
Re: Back to the drawing board...................
« Reply #4 on: March 17, 2008, 12:56:13 PM »
Any of you shooting/tired Hornady Great Plains?

Slenk

  • Guest
Re: Back to the drawing board...................
« Reply #5 on: March 17, 2008, 01:11:50 PM »
Yup !
The only bullet that I shoot . They DO kill Elk.
Mostly shoot round ball though.
Slenk

Offline actionshooter

  • Past Sponsor
  • Trade Count: (+6)
  • Old Salt
  • *****
  • Join Date: Apr 2007
  • Posts: 6043
  • Location: Olympia/Okanogan
    • https://www.instagram.com/steve.bell.actionshooter/
Re: Back to the drawing board...................
« Reply #6 on: March 17, 2008, 03:51:51 PM »
Any of you shooting/tired Hornady Great Plains?
I've shot them a bunch, my 2nd choice

 


* Advertisement

* Recent Topics

Leopold Freedom RDS Mount by 509muley
[Today at 11:39:45 AM]


Snoqualmie valley elk poachers busted by Ridgeratt
[Today at 11:37:13 AM]


Butcher is not allowed to give your meat without proof of CWD test results. by hunter399
[Today at 11:34:03 AM]


Curious on you thought about this “tip” by Tinmaniac
[Today at 08:37:49 AM]


Anyone get a spike for archery? by pd
[Today at 08:34:55 AM]


2025 elk success thread!! by Crunchy
[Today at 08:29:57 AM]


Somebodies pissed by pd
[Yesterday at 09:25:40 PM]


Classification initiative by WDFW by Humptulips
[Yesterday at 07:57:31 PM]


Area 11 2025 - Well? by trophyhunt
[Yesterday at 07:33:04 PM]


Anyone know who carries Exide Marine batteries? by Westside88
[Yesterday at 07:16:39 PM]


Washington State Discover Pass increase October 1st by ganghis
[Yesterday at 06:31:37 PM]


GMU 336 by jason stevens
[Yesterday at 05:47:16 PM]


49 Degrees North Early Bull Moose by teanawayslayer
[Yesterday at 05:17:45 PM]


Smoked salmon by tracksoup
[Yesterday at 04:55:30 PM]


Success! by Mtnwalker
[Yesterday at 03:53:58 PM]


Mortgage Rates As Low As They've Been In A Year by pianoman9701
[Yesterday at 01:48:19 PM]


Eggs. by Dan-o
[Yesterday at 11:54:35 AM]


HUNTNNW 2025 trail cam thread and photos by Dan-o
[Yesterday at 11:51:32 AM]


KODIAK06 2025 trail cam and personal pics thread by nwwanderer
[Yesterday at 10:13:53 AM]


Douglas 108 Moose tag by Ridgeratt
[Yesterday at 09:58:18 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal