collapse

Advertisement


Author Topic: Camera Position  (Read 1255 times)

Offline elksnout

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2009
  • Posts: 1406
  • Location: Washougal, Wash
Camera Position
« on: September 16, 2010, 07:38:56 PM »
New at this . Do you place the camera 90 deg from a trail or in line with it to get head on or going away shots ? And how far off the ground is it wise to place it ?
Can't we all just get along?

Offline wapiti hunter2

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Sep 2009
  • Posts: 3274
  • Location: Yelm
Re: Camera Position
« Reply #1 on: September 16, 2010, 09:45:59 PM »
I try for some angle to the trails not perpendicular.  When perpendicular  the animals will often trigger the IR sensor and then walk past before the shutter fires.  You get nothing but moving brush. Try an angle of about 30 degrees 15-20 feet off the trail. My D40's work well out to 45 feet. I place mine about eye height off the ground but that is mostly to clear brush.  If there is no brush then I would go lower.  My cameras are camouflaged and I place brush around them to further breakup their outlines.

Offline selbman5

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jul 2010
  • Posts: 14
Re: Camera Position
« Reply #2 on: September 17, 2010, 12:07:57 AM »
I PUT MY CAMERA ABOUT 3 FEET OF THE GROUND SO I AM NOT MISSING THE PIC OF ANIMALS. TRY PUTTING IT AT 3 FEET YOU WILL GET ALOT MORE PIC'S

Offline NWBREW

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2009
  • Posts: 4217
  • Location: Stevens County
Re: Camera Position
« Reply #3 on: September 17, 2010, 01:29:30 AM »
I put mine about 5.5 feet with a bit of a downword angle but it depends on the lay of the area you cover. I agree with going about 45 degrees on the trail. A wide spot next to the trail works very nice for this.
Just one more day

Offline billythekidrock

  • Varmint
  • Trade Count: (+1)
  • Explorer
  • ******
  • Join Date: Mar 2007
  • Posts: 13440
Re: Camera Position
« Reply #4 on: September 17, 2010, 05:40:09 AM »
As stated above, it can very depending on location, lay of the land and as well what your target is.

This camera is only 3 feet off the ground and I have gotten pics of bear, coon, elk and deer.



There is a slight depression in the ground in front of the camera so some critters are "overshot" with the cam but it did manage to catch a small coon. This one is set about 50/50 perpendicular/parallel to an old skidder road.

Pics here.
http://hunting-washington.com/smf/index.php/topic,55855.0.html

To get this beaver, the cam was almost two feet off the ground and aimed right down the dam.



This one is set at about 5 feet and is perpendicular to one trail and parallel to another.





I just set this one up last week and it is about 5 ft off the ground and aimed directly up the trail. The land angles uphill as it goes away from the cam location. I know I will overshoot some critters as they pass directly by, but there is a cross trail about 20 feet up the trail that will put the critters in frame. I am a bit nervous as this one is only a couple yards off a mainline.







Offline Skyvalhunter

  • Washington For Wildlife
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Oct 2007
  • Posts: 16013
  • Location: Sky valley/Methow
Re: Camera Position
« Reply #5 on: September 17, 2010, 05:48:06 AM »
But as you see in the pics you have to remove the brush. This will give unusable pics due to wind moving the brush and triggering the camera thus taking up memory. Also remove branches that might be weighed down by snow, rain, drying out as they can block the camera shot. Check the angle of your camerato make sure you are not pointing to high or low. That is why Moultrie has a advatage with their LED alignment light
The only man who never makes a mistake, is the man who never does anything!!
The further one goes into the wilderness, the greater the attraction of its lonely freedom.

Offline elksnout

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2009
  • Posts: 1406
  • Location: Washougal, Wash
Re: Camera Position
« Reply #6 on: September 17, 2010, 10:04:58 PM »
Wow ! Great information from all. Thanks guys. Going to set it up this weekend.
Can't we all just get along?

 


* Advertisement

* Recent Topics

King of the mountain caught sleeping by Wanttohuntmore
[Today at 05:05:32 AM]


Bullet performance 2025? by Sneaky
[Today at 04:39:46 AM]


2025 deer, let's see em! by Bearhunter308
[Yesterday at 11:24:19 PM]


Called about Returned Alta Buck Permit by Limhangerslayer
[Yesterday at 11:07:39 PM]


Youth Cow Elk - Yakima South GMUs 364, 368 by Limhangerslayer
[Yesterday at 10:58:51 PM]


Taneum Elk Cow tag problem by Hiker82
[Yesterday at 09:28:54 PM]


Bear That Hasn’t Missed Many Meals by jrebel
[Yesterday at 09:12:53 PM]


Mt. St. Helens Goat by X-Force
[Yesterday at 08:22:35 PM]


Coupeville Highway pop-up blind by BigredRusch
[Yesterday at 08:19:51 PM]


Big bear on trail cam Kitsap County by Kingofthemountain83
[Yesterday at 08:18:36 PM]


GMU 336 by MADMAX
[Yesterday at 08:18:06 PM]


Recommendations for Pressure Washers by Fastass350
[Yesterday at 08:15:00 PM]


2025 blacktail rut thread by Crunchy
[Yesterday at 08:12:44 PM]


Selkirk bull moose. by X-Force
[Yesterday at 08:07:09 PM]


I'm Going To Need Karl To Come up With That 290 Muley Sunscreen Bug Spray Combo by blindluck
[Yesterday at 07:54:04 PM]


Gutpile Care, yes there is such a thing. by highcountry_hunter
[Yesterday at 07:50:37 PM]


Winthrop - Winter Range Road Closures by shotguunar
[Yesterday at 07:36:52 PM]


Auto repair shop Spokane by walt
[Yesterday at 04:13:25 PM]


Calling Bears by hunter399
[Yesterday at 03:13:37 PM]


Pearygin Quality by Schmalzfam
[Yesterday at 02:08:32 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal