collapse

Advertisement


Author Topic: Building the Perfect Beast  (Read 1161 times)

Offline konrad

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 253
  • Location: South Lake Whatcom, Puget Sound
Building the Perfect Beast
« on: July 09, 2011, 11:02:21 AM »
I am currently involved in a research project that will be used to address some of the major engineering deficiencies currently found in modern compound archery bows. To coin a phrase from Don Henley, I am engaged in “Building the Perfect Beast”.

The kind folks at Gordon Composites have stepped forward to supply laminated springs; however, there are some other questions that need answering before we can proceed to the testing phase.


1: Can anyone please direct me to a source familiar with the manufacture of prototype archery cams?

2: What specs are the current specs for bearings in common use today?

Thanks for your help,
K

“The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter can not be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles.”

Col. Jeff Cooper

Offline Todd_ID

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Apr 2008
  • Posts: 2926
  • Location: Clarkston
  • Hunt Hard!
Re: Building the Perfect Beast
« Reply #1 on: July 09, 2011, 11:34:53 PM »
Any small manufacturing shop with a 3 axis CNC mill will do prototype work.  You bring the CAD drawing to them, they convert it into a format their mill will read, and they'll cut it out of whatever you specify.  Make sure to get a non-disclosure/non-compete signed before turning over your CAD drawings to protect your idea from going any further than you want it to.  Also, if you've got any major changes to what's already being done, then at least apply for a patent; that establishes your intent and could protect you later on from a major manufacturer copying it.  Actually getting a patent through runs $10-15 grand, but applying is only a few hundred and some leg work.

Bearings are different sizes based on manufacturer.  Make your's whatever you want that works with your design that you can get from a reliable source in sufficient quantity whenever you want.  Basically, find your bearing first then design it into the cam.

Good luck!
Bring a GPS!  It's awkward to have to eat your buddies!

 


* Advertisement

* Recent Topics

Norway pass Elk by moocher97
[Today at 12:11:05 AM]


Toutle Quality Bull - Rifle by moocher97
[Today at 12:00:21 AM]


NEED ADVICE: LATE after JUNE 15th IDAHO BEAR by huntnnw
[Yesterday at 11:20:59 PM]


Mature bulls during late season? by Dark2Dark
[Yesterday at 10:53:27 PM]


Cowiche Unit 368 by Limhangerslayer
[Yesterday at 10:41:37 PM]


2025 Draw Results by duckmen1
[Yesterday at 10:30:36 PM]


Put in for a tag I NEVER thought I would draw. by elkrack
[Yesterday at 10:15:14 PM]


Awesome customer service by deerlick
[Yesterday at 10:13:19 PM]


Commercial crab pots going in today. by Stein
[Yesterday at 09:37:31 PM]


FFL preferences or warnings in Olympia or south Sound area? by ASHQUACK
[Yesterday at 09:34:36 PM]


Boat registration by Stein
[Yesterday at 09:31:52 PM]


Flatlanders coming west in 2024, any WA mule deer outfitter recommendations by Beastmonger1987
[Yesterday at 09:31:21 PM]


2024 deer. Let’s see um! by Beastmonger1987
[Yesterday at 09:11:35 PM]


Muzzy Mission Quality!!! by crabcreekhunter
[Yesterday at 09:11:30 PM]


Unknown Suppressors - Whisper Pickle by xrangerx
[Yesterday at 09:06:49 PM]


Stillaguamish 448 QD rifle tag by Bo_nimrod
[Yesterday at 09:03:46 PM]


Nevada mule deer in the rut, followed by late rifle elk in Arizona by Beastmonger1987
[Yesterday at 08:36:20 PM]


Teanaway bull elk by 1buckdown
[Yesterday at 08:34:43 PM]


Colockum Archery Bull Tag by oldleclercrd
[Yesterday at 08:31:58 PM]


2025 OILS! by Buzzsaw461
[Yesterday at 08:17:27 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal