collapse

Advertisement


Author Topic: ignition  (Read 4662 times)

Offline jdb

  • the illustious potentate
  • Non-Hunting Topics
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 3799
  • Location: selah
ignition
« on: July 13, 2008, 05:30:25 PM »
My son and I will be muzzleloading for elk this fall. He shoots a knight with musket caps and 100 gr. pyrodex pellets. I shoot a t/c hawkin and 85 gr. pyrodex loose and use #11 caps. last year we had a big mix up with our caps so this year I want to simplify things and use the same cap on both guns. so do we go muskets or #11'S? JB
nuke the gray whales for jesus!

Offline rackattack

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: May 2007
  • Posts: 659
  • Location: Battle Ground
Re: ignition
« Reply #1 on: July 13, 2008, 05:32:24 PM »
Go with the musket caps.  There hotter and easier to handle. :twocents:

Offline actionshooter

  • Past Sponsor
  • Trade Count: (+6)
  • Old Salt
  • *****
  • Join Date: Apr 2007
  • Posts: 6052
  • Location: Olympia/Okanogan
    • https://www.instagram.com/steve.bell.actionshooter/
Re: ignition
« Reply #2 on: July 13, 2008, 06:04:58 PM »
I use the musket caps on my knight, but I have had problems with them falling off :dunno:

Offline wastickslinger

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 2863
  • Location: pluto
Re: ignition
« Reply #3 on: July 13, 2008, 06:34:19 PM »
I like the musket caps as well. I have yet to have a misfire.

Offline Huckleberry

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Mar 2008
  • Posts: 167
  • Location: Sedro-Woolley
Re: ignition
« Reply #4 on: July 13, 2008, 06:47:47 PM »
If you use the #11's make sure they are the ones with green inside. The red ones (like CCI) aren't very hot and if anything gets damp they don't work very well. The green ones also fire hotter so the "delay" between little boom and big boom isn't as noticeable. I haven't had a need to use musket caps yet. Those I know who do hunt with them say they wouldn't go back.

My one question with musket caps is how they are constructed. I use nail polish over the cap/nipple to ensure a water tight seal and make sure it doesn't fall off. With the flared edges of a musket cap could you still do this or would the shape prevent it?

Offline actionshooter

  • Past Sponsor
  • Trade Count: (+6)
  • Old Salt
  • *****
  • Join Date: Apr 2007
  • Posts: 6052
  • Location: Olympia/Okanogan
    • https://www.instagram.com/steve.bell.actionshooter/
Re: ignition
« Reply #5 on: July 13, 2008, 09:08:48 PM »
If you use the #11's make sure they are the ones with green inside. The red ones (like CCI) aren't very hot and if anything gets damp they don't work very well. The green ones also fire hotter so the "delay" between little boom and big boom isn't as noticeable. I haven't had a need to use musket caps yet. Those I know who do hunt with them say they wouldn't go back.

My one question with musket caps is how they are constructed. I use nail polish over the cap/nipple to ensure a water tight seal and make sure it doesn't fall off. With the flared edges of a musket cap could you still do this or would the shape prevent it?

 When I use #11 I use the green, RWS, they do seem hotter.

With the musket caps I don't think you can use the nail polish trick.

Offline follow maggie

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3323
  • Location: Fargo
  • Just me, just being a nomad
Re: ignition
« Reply #6 on: July 13, 2008, 09:43:14 PM »
I switched to the musket cap a couple years ago, and it solved the nasty misfire problem I had.  The gun would go boom 1/2 the time.  With the musket cap, it goes boom every time.

Offline CP

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Mar 2008
  • Posts: 7214
  • Location: Mukilteo
Re: ignition
« Reply #7 on: July 14, 2008, 07:09:40 AM »
I’ve been considering trying musket caps but with the comments above I think I’ll hold off on that.  I use CCI magnum #11 caps and they work fine.  Zero delay between little bang and big bang, just one bang.  The few misfires that I have had were my fault, either:
1.   The red chemical in the cap had fallen out and I didn’t notice
2.   I didn’t clear the oil from the nipple and snail by snapping a couple caps prior to loading
3.   I didn’t put any powder in  :-[

I use FFFg powder in my .54 – I know this isn’t recommended but I spoke with a Hodgdon technician and that’s what he uses.  He of course gave the usual disclaimer to follow their recommended practices and if I blow myself up they have no liability, etc.  The finer powder flows all the way to the base of the nipple for an instant light and I use less than a 100 grains, nowhere near the max for my rifle, so overcharge should not be a issue. 

The only complaint I have about the #11 caps are that they are small and hard to handle.

Offline wastickslinger

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 2863
  • Location: pluto
Re: ignition
« Reply #8 on: July 14, 2008, 11:01:42 AM »
Actionshooter, pich it a little bit before you put it on. Makes it fit real snug. I think all guns have the same issue with the musket. That is the only issue I have had. Much better than fumbling with those tiny #11's.

Offline Sagedawg

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Nov 2007
  • Posts: 657
  • Location: Spokane
Re: ignition
« Reply #9 on: July 14, 2008, 03:31:47 PM »
 yeah what he said, a slight pinch will hold it on nice and tight.


  Sage

 


* Advertisement

* Recent Topics

328/329 reports by Gentrys
[Today at 07:34:05 AM]


2025 blacktail rut thread by Buck Rub Jr
[Today at 07:21:06 AM]


Restraining Order to Prevent Sherman Wolf Removal by hunter399
[Today at 07:20:48 AM]


Buck to Doe Ratio by hunter399
[Today at 05:03:34 AM]


New hunter looking for some help by hunter399
[Today at 04:48:40 AM]


GL Late Tag holders by JakeLand
[Today at 04:20:16 AM]


CB Radio Hints and Tips, Installing guidance. by ghosthunter
[Today at 03:22:57 AM]


2025 elk success thread!! by Broomd
[Yesterday at 10:27:45 PM]


Hunting with a suppressor - dumb idea? by GWP
[Yesterday at 10:08:58 PM]


2025 deer, let's see em! by fowl smacker
[Yesterday at 09:42:13 PM]


2024 Ford Edge Opinion by mountainman
[Yesterday at 09:28:11 PM]


Pheasant Release Program by McCRIZZLEY
[Yesterday at 08:59:10 PM]


Kettle Range Moose by MADMAX
[Yesterday at 07:15:18 PM]


2025 Montana alternate list by CJ1962
[Yesterday at 07:12:50 PM]


Youth Idaho Brownlee Cow Tag by CJ1962
[Yesterday at 07:08:52 PM]


AMMO 6.5 PRC 143 Gr ELD-X Hornady by scottfrick
[Yesterday at 03:57:18 PM]


North Idaho 2025 Rifle Bull by ganghis
[Yesterday at 03:18:11 PM]


I bought this beater Win 06 as a scrapper outer, it turned into a fixer upper by bearhunter99
[Yesterday at 02:14:34 PM]


Any Luck With Used Dies ? by HereDuckyDucky
[Yesterday at 01:49:07 PM]


Getting the hang of hanging on to mallards! by Goshawk
[Yesterday at 12:51:19 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal