collapse

Advertisement


Author Topic: Kudos to Warne Rings customer service/ warranty.  (Read 1349 times)

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Kudos to Warne Rings customer service/ warranty.
« on: January 23, 2012, 10:29:27 AM »
After looking through some hunting photos of this year, I noticed that two top ring screws were missing out of my rings on my 450 Ultra Magnum that I used to take my elk. Upon closer inspection of the rifle, sure enough. Both screw heads were broke off, the rear on the front ring and the front screw on the rear ring. No doubt this was due to recoil. The rifle shot well on the range and took my elk clean at 302 yards, with only one screw each.

I called Warne and explained it to Randy, I explained it could have been recoil or my over tightening them due to the fact I had to keep tightening them up to keep the scope from sliding in the rings due to reciol.

Randy said " No problem" send them in and we will replace them with either the same set or a set of tactical, heavier duty rings. That it was my choice, he even asked if I needed the rifle right away. If that was the case he would send me the new rings immediately.

It is a true pleasure to see such customer service these days.

Here is the picture I was looking at when I noticed the screws missing after the fact.


Offline BULLBLASTER

  • Non-Hunting Topics
  • Trade Count: (+15)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 8106
Re: Kudos to Warne Rings customer service/ warranty.
« Reply #1 on: January 23, 2012, 10:42:25 AM »
Good to hear they are standing by their product! There are still companies out there with great service!

Offline b23

  • Non-Hunting Topics
  • Trade Count: (+8)
  • Frontiersman
  • *****
  • Join Date: Jan 2010
  • Posts: 3327
  • Location: Spokane Wa.
Re: Kudos to Warne Rings customer service/ warranty.
« Reply #2 on: January 23, 2012, 05:07:59 PM »
I've had the exact same experience with Warne.  I had some issues with ring height once and they were excellent to work with.

 


* Advertisement

* Recent Topics

Lion Down - the Savor of Success by Rigby416
[Today at 12:17:56 AM]


Swakane by redi
[Yesterday at 11:27:02 PM]


MOA or MRAD, & Why? by Magnum_Willys
[Yesterday at 09:57:59 PM]


Pics from this year 2025 by Kingofthemountain83
[Yesterday at 09:36:06 PM]


2025 elk success thread!! by jstone
[Yesterday at 09:14:54 PM]


2025 blacktail rut thread by Crunchy
[Yesterday at 08:12:33 PM]


Idaho Trapping Journal 2025/26 by TeacherMan
[Yesterday at 07:38:11 PM]


Trap Check Time by TeacherMan
[Yesterday at 07:33:16 PM]


Dodge 48re transmission recommendations by 92xj
[Yesterday at 06:19:32 PM]


Crazy looking Deer by NOCK NOCK
[Yesterday at 06:10:52 PM]


"Any Deer" GMU's - Proof of Sex? by Kingofthemountain83
[Yesterday at 05:31:47 PM]


In the background by boneaddict
[Yesterday at 03:49:49 PM]


Leopard Cur Pups by teanawayslayer
[Yesterday at 11:05:27 AM]


Smelt ? by Trapper John
[Yesterday at 10:41:03 AM]


Wildlife Obsession Duvall WA Taxidermy Closing its doors by Dan-o
[Yesterday at 10:26:27 AM]


Jim Horn's elk calling, instructional audio CD's. by WapitiTalk1
[Yesterday at 10:06:23 AM]


Long Range Steel Choke by Elmer Fletch
[Yesterday at 06:10:11 AM]


West side antler buyers by addicted1
[December 12, 2025, 10:19:05 PM]


Is it a conflict of interest by bbarnes
[December 12, 2025, 08:54:11 PM]


Shotgun Sight help by hughjorgan
[December 12, 2025, 08:38:11 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal