lapua brass

[stevemiller]

Anyone try or use lapua brass?

[Rising Sight]

I would use Lapua brass in every cartridge that I own if they made brass for them. Pick some up and try them. I don't think you will be disappointed.

[CoyoteChuck52]

I would use Lapua brass in every cartridge that I own if they made brass for them.

X2

[jay.sharkbait]

x3

[HUNTINCOUPLE]

X4.

[xXLojackXx]

Check the forums. You can pick it up in most popular calibers with 1 or 2 firings for almost half price.

[Bill W]

I bought 200 .30/06 Lapua cases hoping to get 100 cases with minimum variation.   What I discovered surprised me. 188 cases only varied 1.2 grains and the other 12 spread it to a total of 2.2 grains.   When I checked neck thickness, figuring I'd have to turn necks, I found out that the thicknesses only varied. 001.   I didn't turn them.  Also after sorting the cases by weight and dropping the box, I just plunked the cases back in the box without reweighing them for sorting.  The necks are also fairly thick, running .014 to .015" in range.

I also shoot Lapua in my 6mm PPC and .30 BR.

[TheGrayRoom]

I have 400 cases, out of the 400 only 3 were not up to my personal standards.  I have reused them with 165g , and 190g if you can get a good deal on bulk it's the way to go.

Come on look at this beautiful brass that is just begging to be loaded



http://www.lapua.com/en/products/reloading/cases

[yorketransport]

As the others have said, Lapua brass is worth the price. I run it in my 6br, 243, 308, and 284 (6.5x284 necked up). I have over 15 firings on the 6br brass and it's still going strong.

Andrew