collapse

Advertisement


Author Topic: martin lynx magnum specs  (Read 13322 times)

Offline WA hunter14

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: May 2011
  • Posts: 851
  • Location: Weippe ID
martin lynx magnum specs
« on: November 07, 2013, 07:19:25 PM »
i bought a martin lynx magnum a few months ago and just recently shot it, the bow is either at the lowest draw weight it can go to or close to it. anyways it seems like it is harder to pull back than 55 pounds should be and when i took it to the archery guy in big R he pulled it back and said that it was set at 70 pounds. does anyone know what the low end of the draw weight is on one of these bows?

Offline HUNTINCOUPLE

  • Lost Somewhere on the Praire of Klickitat Co. Chasing The Elusive BENCHLEG DEERS.
  • Non-Hunting Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Jan 2009
  • Posts: 8145
  • Location: Lyle WA, 98635
  • Yep, my avatar is from my front porch. #2835
Re: martin lynx magnum specs
« Reply #1 on: November 07, 2013, 07:48:06 PM »
I have a older lynx mag with the oblong energy cams. It maxes out at about 65lbs. Not sure which cams you have they also came with flight wheels and your limbs may have been changed out for more horse power? If RadSav on here doesn't chime in send him a PM. He's very knowledgeable about this stuff. Good luck!!!!
Slap some bacon on a biscut and lets go, were burrnin daylight!

Most peoples health is a decision not a condition?

Kill your television!  ICEMAN SAID TO!

Life Member of Hunting  Washington  Forum.

Time in the woods is more important than timing the moon.

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: martin lynx magnum specs
« Reply #2 on: November 08, 2013, 04:40:50 AM »
I checked all my reference stuff and I have nothing from Martin that far back so I have to go by memory.  If memory is correct, which is always a risk to assume these days, the Lynx Magnum was available 45-60 or 55-70#.  I do not remember them ever offering it with an 80# maximum option.  String length I believe was 37" on both.  Guys these days probably feel the draw weight is more since the let-off is 50-60% and they are not used to that.  Big "R" would not be my establishment of choice if trying to figure out specs on an older bow.  Might need to get to a long standing pro-shop for that.  If you absolutely need accurate specs I can always call Terry Martin.  He would know for sure, but I expect he might be a little hard to reach right now with all the things that are going on over there in Walla Walla.

Sorry I was unable to be more definite and specific.  Good Luck!
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline WA hunter14

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: May 2011
  • Posts: 851
  • Location: Weippe ID
Re: martin lynx magnum specs
« Reply #3 on: November 08, 2013, 07:10:15 AM »
no thats great thankyou

Offline WaSouthpaw

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Dec 2013
  • Posts: 40
  • Location: Arlington, WA
  • Groups: NRA Life Member,
Re: martin lynx magnum specs
« Reply #4 on: December 19, 2013, 04:36:12 PM »
Actually I have my lynx in the shop right now. When I dropped it off it was set at 63lbs. The stcker on the lower limb said 55 - 70 lbs. 50% let off or 65% depending on which pivot hole in the flight wheels. Since I have not shot it since '92 I asked for the bow to be set to 55lbs so I can work on shooting form basics and get re-started on the right foot. 

Just my 2 bits. Don

 


* Advertisement

* Recent Topics

Mason County Youth Buck Nov 1-16 by Sundance
[Today at 11:36:57 AM]


I’m on a blacktail mission by Sundance
[Today at 11:34:34 AM]


Rimrock Bull: Modern by zagsfan1
[Today at 11:00:13 AM]


Sportsman Alliance files petition to Gov Ferguson for removal of corrupt WA Wildlife Commissioners by dreamingbig
[Today at 10:44:31 AM]


Getting back into dogs by Machias
[Today at 10:40:03 AM]


VA Loan Closing Costs by pianoman9701
[Today at 10:20:51 AM]


DR Brush Mower won't crank by Sandberm
[Today at 09:58:05 AM]


Swakane Ram by Timberstalker
[Today at 09:46:56 AM]


Selkirk bull moose. by vandeman17
[Today at 09:33:41 AM]


After a couple years of poor health,... by Skillet
[Today at 08:49:46 AM]


Colockum Archery Bull Tag by Gonehuntin01
[Today at 07:15:15 AM]


Drew Cleman Mountain Any Ram! by starbailey
[Today at 07:04:50 AM]


Anybody hunt with a 25 Creedmoor? by Threewolves
[Today at 05:58:47 AM]


2025 OILS! by oldschool
[Today at 05:33:29 AM]


September mule deer velvet by jstone
[Yesterday at 08:43:04 PM]


Jim Horn's elk calling, instructional audio CD's. by WapitiTalk1
[Yesterday at 07:40:33 PM]


Goose hunting with vice grips by Pegasus
[Yesterday at 04:51:23 PM]


Public Land Sale Senate Budget Reconciliation by GeoSwan
[Yesterday at 04:12:47 PM]


Back up camera by Blacklab
[Yesterday at 11:54:30 AM]


Drew Quality by hunter399
[Yesterday at 11:12:45 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal