collapse

Advertisement


Author Topic: Polishing aluminum is alot of work, but worth it  (Read 1305 times)

Offline Westside88

  • Political Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Sep 2013
  • Posts: 770
  • Location: Western Wa
Polishing aluminum is alot of work, but worth it
« on: January 24, 2021, 06:59:14 PM »
I kept my old Protech toolbox for use on my new pickup. Of course that requires cleaning it up first. It's 20 years old and was pretty oxidized, but I think it cleaned up pretty well. I used a combination of mothers, chemical guys heavy metal a mothers powerball, a couple cheap cotton buffing wheels for the cord less and a whole lotta elbow grease. Not bad for an old toolbox.

Offline redi

  • Trade Count: (+20)
  • Sourdough
  • *****
  • Join Date: Nov 2011
  • Posts: 1271
  • Location: centralia
Re: Polishing aluminum is alot of work, but worth it
« Reply #1 on: January 24, 2021, 07:12:11 PM »
Wow looks great. Nice work

Offline Fastass350

  • Past Sponsor
  • Trade Count: (+9)
  • Sourdough
  • *****
  • Join Date: Mar 2010
  • Posts: 1633
  • Location: La Center
Re: Polishing aluminum is alot of work, but worth it
« Reply #2 on: January 24, 2021, 07:21:05 PM »
Looks great! I love the satisfaction of getting a good shine on aluminum, itís not easy!  Good job 👍

Offline huntnphool

  • Chance favors the prepared mind!
  • Political Topics
  • Trade Count: (+10)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 30391
  • Location: Pacific NorthWest
Re: Polishing aluminum is alot of work, but worth it
« Reply #3 on: January 24, 2021, 08:13:00 PM »
 Looks good, you should try doing a boat and trailer. :chuckle:
The things that come to those who wait, may be the things left by those who got there first!

Offline Harbor_hunter

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Feb 2014
  • Posts: 393
  • Location: Grays Harbor
Re: Polishing aluminum is alot of work, but worth it
« Reply #4 on: January 24, 2021, 08:14:44 PM »
Looks nice!

Offline Westside88

  • Political Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Sep 2013
  • Posts: 770
  • Location: Western Wa
Re: Polishing aluminum is alot of work, but worth it
« Reply #5 on: January 24, 2021, 08:33:12 PM »
Looks good, you should try doing a boat and trailer. :chuckle:
That sounds like a multi day affair. Iím planning to pick up an orbital polisher from Griots that with the right pad would probably save time on this type of project. 

Offline Magnum_Willys

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 4541
Re: Polishing aluminum is alot of work, but worth it
« Reply #6 on: January 24, 2021, 11:57:08 PM »
Looks great- did you have to strip a protective coating off first?

Offline rasbo

  • Global Moderator
  • Trade Count: (+1)
  • Explorer
  • *****
  • Join Date: Aug 2008
  • Posts: 19940
  • Location: Grant county
  • In God I trust...Try taking that away from me!
Re: Polishing aluminum is alot of work, but worth it
« Reply #7 on: January 25, 2021, 05:21:27 AM »
Bought the ball and two jars for my boat. The box looks great

Offline Westside88

  • Political Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Sep 2013
  • Posts: 770
  • Location: Western Wa
Re: Polishing aluminum is alot of work, but worth it
« Reply #8 on: January 25, 2021, 06:02:04 AM »
Looks great- did you have to strip a protective coating off first?
No they donít have any coating to start with

Offline Westside88

  • Political Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Sep 2013
  • Posts: 770
  • Location: Western Wa
Re: Polishing aluminum is alot of work, but worth it
« Reply #9 on: January 25, 2021, 06:05:22 AM »
Bought the ball and two jars for my boat. The box looks great
The power ball saved time for sure, but still required a lot of hand work to even things out. In the future I want to try an orbital polisher with a microfiber cutting pad. Thereís a video on YouTube of a guy polishing diamond plate using the chemical guys polish. That looks like a good way to go

Online Stein

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+4)
  • Old Salt
  • ******
  • Join Date: Sep 2013
  • Posts: 8560
  • Location: Arlington
Re: Polishing aluminum is alot of work, but worth it
« Reply #10 on: January 25, 2021, 09:57:00 AM »
I did this for the diamond seat boxes on my boat last summer while we were locked off the water.

I bought a dual action polisher and a heavy wool pad, it worked about 1,000 times better than all the other things I tried.

I used this stuff, it's a two step process outlined in the videos.  It took some time and multiple treatments, but for the super nasty salt corrosion it ended up working very well.

http://www.californiacustom.com/purple_metal_polish.html

The benefit is you now have a da polisher and can get different pads and chemicals and now polish and remove scratches on boat or truck paint.

Offline cavemann

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Dec 2014
  • Posts: 890
  • Location: Washington
Re: Polishing aluminum is alot of work, but worth it
« Reply #11 on: January 25, 2021, 10:06:25 AM »
I did my Stryker years ago..  I used Shark Hide when I was done and worked really well for me.  It was a pain but kept it protected very well and kept a shine.

Offline Blacktail Sniper

  • Trade Count: (+3)
  • Old Salt
  • ******
  • Join Date: Oct 2009
  • Posts: 5487
  • Location: Rochester, Washington
  • Kill'em all...let the gravy sort'em out!!!
Re: Polishing aluminum is alot of work, but worth it
« Reply #12 on: January 25, 2021, 11:07:43 AM »
That looks really nice, effort well spent.
It is better to be consistently incorrect than inconsistently correct...

Sarcasm: The ability to insult stupid people without them realizing it. 

My level of sarcasm depends on your level of stupidity...

Sarcasm makes smart people laugh and stupid people mad.

Offline huntnphool

  • Chance favors the prepared mind!
  • Political Topics
  • Trade Count: (+10)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 30391
  • Location: Pacific NorthWest
Re: Polishing aluminum is alot of work, but worth it
« Reply #13 on: January 25, 2021, 02:56:37 PM »
Looks good, you should try doing a boat and trailer. :chuckle:
That sounds like a multi day affair. Iím planning to pick up an orbital polisher from Griots that with the right pad would probably save time on this type of project.

 I got tired of cleaning the black residue from each diamond on the trailer and had it Line-Xíd but still polish the boat and trailer once a year.
I did my Stryker years ago..  I used Shark Hide when I was done and worked really well for me.  It was a pain but kept it protected very well and kept a shine.

 I tried the Shark Hide once but it dulled the polished finish a bit so havenít done it since.
The things that come to those who wait, may be the things left by those who got there first!

Offline Westside88

  • Political Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Sep 2013
  • Posts: 770
  • Location: Western Wa
Re: Polishing aluminum is alot of work, but worth it
« Reply #14 on: February 06, 2021, 05:18:54 PM »
Got the old box mounted on the new truck today. I'm glad I was able to repurpose this one, they've gotten pretty expensive.

 


* Advertisement

* Recent Topics

Idaho proposes giving outfitters bigger share of NR deer/elk tags by fishngamereaper
[Today at 08:25:38 AM]


Spring bear, 2021, DNRY by hunter399
[Today at 08:25:04 AM]


Cool Cat by Ironhead
[Today at 08:25:00 AM]


6.8 Western, Winchester by Bill W
[Today at 08:20:48 AM]


Lawn tractor - not lawn mower by scotsman
[Today at 08:17:08 AM]


6.5 Weatherby RPM cartridge by bearpaw
[Today at 08:07:21 AM]


Post The Ammo/Reloading Supplies You Find In Stock Here! by hunter399
[Today at 08:04:34 AM]


FS Kel Tec PMR 30 by fowl smacker
[Today at 07:42:29 AM]


Kel Tec PMR 30 by bigdub257
[Today at 07:38:52 AM]


FS: Nikon Buckmasters 1x20 scope by Bandocknr
[Today at 07:38:30 AM]


Life size Bear by MtnMuley
[Today at 07:37:39 AM]


Money Saving Ideas for Ammo and Reloading Components by NW SURVEYOR
[Today at 07:37:29 AM]


New location in GMU 117 by hunter399
[Today at 06:22:09 AM]


Where were you when... by hunter399
[Today at 06:20:29 AM]


Collectors: 10 year Rip Van Winkle - 2020 release by Boss .300 winmag
[Today at 05:16:22 AM]


WTS 22-250 ammo by ELKBURGER
[Today at 05:07:36 AM]


Lake Chelan winter shootout. by Cap.Silver
[Today at 02:48:41 AM]


WTT Varget for ?? by huntnphool
[Today at 12:34:54 AM]


Kel Tec Sub 2K gen 2 Glock by carpsniperg2
[Today at 12:08:11 AM]


WTB CZ 527 6.5 grendel by Bigshooter
[Yesterday at 11:01:51 PM]